+44 (0)1323 871527
This Sequencer has a 5.5mm 12V Input and as explained below there is a whole selection of Power inputs (Mains, Batteries or direct 12V + more)
This sequencer is bigger than most of our other drivers and isnt ideal (but not impossible) to be come part of a wearable costume
Its dimensions are: 12cm x 7cm x 5cm
There are 6 different sequences which are selected by pressing the red button
The sequences are also played through at different speeds so you can find the exact style you want
Mode 1: Each Channel Once - Continuous
Mode 2: One Channel Unlit - Continuous
Mode 3: One Channel - Bounces Back
Mode 4: Unlit Channel - Bounces Back
Mode 5: Each Channel Builds Up - Continuous
Mode 6: Each Channel Builds Up - Bounces Back
The EL Wire can easily be bent into shape to make any letters, numbers, words, picture or message
If you run out of letters, with a splitter you can have up to 5 X1 metres coming out of each channel - thats pretty much the whole alphabet!
* The Inverter that drives the EL Wire in this Sequencer is very powerful and should run at least 3 metres of EL Wire or 200 squ cm of EL Tape off each channel else the high power may damage the wire or tape*
We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.
This driver is no exception as it also has a range of power inputs that cover most potential uses, please choose one of these from the dropdown menu:
1) ONLY THE DRIVER
Maybe you have your own 12V 5.5mm/2.1mm input you want to use or perhaps you will be using one of the 2-way power splitters?
Whatever your reason, this option gives you just the sequencer (as in the pic above) - without any external power connectors like the rest of these listed below...
Perfect if you already have your own 12V battery to run this driver
This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable
This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.
Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes
1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)
1800mAh: 100g (5cm x 3.3cm x 2.7cm)
2800mAh: 150g (6.8cm x 4.7cm x 2.2cm)
5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)
All of these Li-ion Batteries come with an intelligent recharger
This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)
This adapter plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories
If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.
Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.
Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE
*If you want more than one of the power connector mentioned above for your EL Driver,
They can all be found in our Accessories section, or just click the description you want and be taken to its own page*
you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver
You can use several different controllers with just one hand-held remote unit if you want to switch several different drivers at once
The Remote Control Unit is not available on the drop down options above - please click on the link to get the full details of this handy EL Accessory and add it to your basket
*All the EL wire we supply comes with a connector so they plug straight into the driver*