+44 (0)1323 871527
2 pieces of 3cm X 5cm EL Panel for the Iron Man eyes in a choice of colours
A Triangle EL Panel for the Arc Reactor 18cm on long side, 12cm on short sides and 9cm at deepest point
A 4xAAA battery EL Driver with side switch to power the EL panels
2 X 2-way splitters help the panels fit the costume.
The suggested setup is:
The Driver is held on the body near the chest
One 2-way-splitter comes out and one channel goes off to the triangle panel acting as the Arc Reactor near the chest
The other channel has a second two way splitter going off to the helmet to power the 3cmX5cm EL Panels for the eyes
These EL Panels are NOT SEE-THRU so you must design the eye piece to be above or below the actual eye
By having it on a second 2-way-splitter it makes it easier to unplug and remove the helmet - if it all runs off a 3-way-splitter, which it could, it would not be so easy to unplug the head mask
The kit does not include the mask or and its best to put a design over the glowing Arc Reactor - apart from that, the whole kit is ready to use - just plug and play!
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.
- - - - - - - - - - - -
This EL Panel comes with a standard EL Wire connector so simply plugs into any EL driver.