Sam Flynn Tron – FRONT Replica EL Panel Costume + Driver

Product Options
Quantity

Price: from £49.99

Loading Updating cart...


With this kit comes:

1) Two pieces of replica shaped EL Tape for the front of a Sam Flynn Costume - a Left and a Right

2) A single 1cm X 15cm EL Tape for the glowing mid line

4) A Powerful 8 XAA battery inverter - capable of powering a further 250squ cm of EL Tape or up to 10 metres of EL Wire (it will power the "Tron Back Set" plus a further 2cm X 25cm of EL Tape)

5) A 3-way splitter,

6) 75cm of Velcro - with sticky hoop and sewable loop to make it easy to attach the set to a costume and have it removable

The Set is only available in Light Blue (Tron Blue)

The whole kit is ready to use - just plug and play!

Dimensions of the products:

If you are making a costume it is a good idea to plan it out properly.

For this set, the driver/inverter is very powerful and comes with a separate power pack

So here is the dimensions of all the parts plus lengths of wire between them.

Feel free to message me if you have any questions

THE POWER PACK

Takes 8 X AA batteries (not supplied) and is 6.5cm X 6cm X 3cm

it has a 65cm thin power wire coming out of it that leads to the...

INVERTER

The inverter is 6cm X 4cm X 4cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The Splitter is 40cm long in total,

it is 20cm of wire which then splits into 3 separate strands which are all 20cm long - 2 of them then lead to...

Left and Right Flynn Replica EL Tapes

The EL Tape is 30 cm from top to tail with the stick and hoop that comes in near the shoulder adding another 8cm

The tape is just 350 microns thick - that is 1/3rd of a millimeter!

Sticky back velcro is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky

You must sew the other part of the velcro onto the costume making it very convenient to attach and remove

Of course you dont need to use the velcro and fix it any way you choose

The Mid-Line

Sam Flynn has a small line of light that runs down the middle of his chest. This is lit by the 1cm X15cm EL Tape provided. This tape can be easily cut to shape if you prefer it smaller

SPLITTERS

This is how we recommend using the splitters:

A 3-way splitter coming straight from the Inverter

2 of these channels go to the left and right Flynn Torso

the third goes to the Mid-Line

Its not complicated or fiddly - ive just given all those details if you want to plan your costume before you buy the set - feel free to message me if you have any questions

The whole kit is ready to use - just plug and play!

OR CONTACT US IF YOU WANT ADVICE PLANNING YOUR SET

el wire and el tape

slide_template: default
Product Options
Quantity

Price: from £49.99

Loading Updating cart...
LoadingUpdating...