Siren Gem Replica EL Panel Front + Back + Legs + Driver

Product Options
Quantity

Price: from £64.99

Loading Updating cart...


This listing is for:

1) Four pieces of Angular EL Tape for the body of a Gem Costume

2) A single 1cm X 15cm EL Tape that can be easily snipped to length - for the glowing mid line

3) Two pieces of 2cm X40cm Curved EL Tape for the back of a Tron Costume - It is curved to go round the ID Disc and over the shoulder

4) A Powerful 8 XAA battery EL Driver (or rechargeable 2800mAh Li-ion Driver)

5) 1 X 4-way splitters, a 3-way splitter , a mini 3-way splitter and 2 X 50cm extender for the leg parts - these make the whole set a simple 'plug and play'

6) 1.5metres of Velcro - with sticky hoop and sewable loop to make it easy to attach the set to a costume and have it removable

This set is only available in Light Blue (Tron Blue)

The whole kit is ready to use - just plug and play!

Dimensions of the products:

If you are making a costume it is a good idea to plan it out properly.

For this set, the driver/inverter is very powerful and comes with a separate power pack

So here is the dimensions of all the parts plus lengths of wire between them.

Feel free to message us if you have any questions

THE POWER PACK*

Takes 8 X AA batteries (not supplied) and is 6.5cm X 6cm X 3cm

it has a 65cm thin power wire coming out of it that leads to the...

DRIVER

The driver is 6cm X 4cm X 4cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The 4- way Splitter is 40cm long in total,

it is 20cm of wire which then splits into 4 separate strands which are all 20cm long - 1 of them then lead to...

Gem Front

This part has its own mini-3way splitter attatched to two of the 2cm x 40cm Curved EL Tape and the 1.5cm x 15cm mid line Piece

Sticky back velcro is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky

You must sew the other part of the velcro onto the costume making it very convenient to attach and remove

Of course you dont need to use the velsro and fix it any way you choose

Another channel off the main 4-way splitter goes to the back of the costume

Plug the other 3-way splitter into thi and those three channels go off too...

EL Identity Disc

This Large El Hoop is 14cm in diameter, there are two thin EL Tapes running in concentric circles and the inner diameter is just over 9cm across

and...

2cm X 40cm Curved Outline

The EL Tape is curved so is 37 cm from top to tail - it has been designed to go on the back round the ID disc and curve over the shoulder

The other two channels off the main 4-way splitter are for the leg pieces

a 50cm extender wire plugs into both of these to take the power too...

Gem Leg Pieces

Each leg has a 40 cm curved EL Tape to run down to the knee

SPLITTERS

This is how we recommend using the splitters

A 4-way splitter coming straight from the driver - for the front, the back and each leg

Depending on where you have the inverter, you may or may not need both extender wires

*Instead of 8XAA battery pack this whol unit can be powered by a small rechargeable Li-ion battery

The 2800mAh battery is as powerful as 8xAA batteries but weighs only 150g and is 6.8cm x 4.7cm x 2.2cm

It comes with an Intelligent Charger

Its not complicated or fiddly - ive just given all those details if you want to plan your costume before you buy the set - feel free to message me if you have any questions

The whole kit is ready to use - just plug and play!

OR CONTACT US IF YOU WANT ADVICE PLANNING YOUR SET

We have some crazy glowing masks & glasses that go well with this kit - take a look!

el wire and el tape

- - - - - - - - -

slide_template: default
Product Options
Quantity

Price: from £64.99

Loading Updating cart...
LoadingUpdating...