+44 (0)1323 871527
It still needs to be attached to your own costume
With this set you get:
1) An Orange rinzler T Square
2) A 14cm ID Disc
3) Two EL Tape Sacral shapes to go at the base of the spine
4) Two El Hoops for the front of the costume
5) Two EL Curves for the front of the costume
6) Two 1.5cm x 15cm el Tape for the top of the arms
7) A Powerful 8 XAA battery EL Driver - capable of powering a further 200squ cm of EL Tape or up to 10 metres of EL Wire
A 3-way splitter, a 4-way, two special 'Small-Medium--Long' 3-way splitters a 5 way splitter and a 50cm long extender to make it a simple 'plug and play' but also with plenty of room for the wire to stretch around the costume
(An extra mini 3 way splitter is included if you want to add more tape or arrange the costume in a different way)
50cm of Velcro - with sticky hoop and sewable loop to make it easy to attach the set to a costume and have it removable
This Set is only available in ORANGE
Dimensions of the products:
If you are making a costume it is a good idea to plan it out properly.
For this set, the driver/inverter is very powerful and comes with a separate power pack
So here is the dimensions of all the parts plus lengths of wire between them.
Feel free to message us if you have any questions
THE POWER PACK
Takes 8 X AA batteries (not supplied) and is 6.5cm X 6cm X 3cm
it has a 65cm thin power wire coming out of it that leads to the...
The driver is 6cm X 4cm X 4cm
It has the controls on it - Off, Flashing or On
It has a 55cm wire coming out of it that leads to the...
The Splitter is 40cm long in total, it is 20cm of wire which then splits into 5 separate strands which are all 20cm long - 1 of them then lead to...
THE RINZLER T-SQUARE
This sits at the front of the chest and is 8cm wide and 4 cm long
The tape is just 350 microns thick - that is 1/3rd of a millimeter!
Sticky back velcro is supplied to stick to the back of these EL Shapes - be careful putting it on as that glue is VERY sticky.
You can then sew the other part of the velcro onto the costume making it very convenient to attach and remove.
Of course you dont need to use the velcro and you can fix it any way you choose.
There is an extender wire that leads to a 3 way splitter at the back of the costume
This will plug into the 14cm wide ID disc
The Splitter will also plug into the two Sacral shapes that sit at the base of the spine and look great
At the front of the costume two special 3-way 'SML' splitters comes off for the left and right hand side. The Short channel can be used for these EL Hoops
EL CURVE and 15cm STRIPE
The rest of the SML splitter can be used for the curve and the stripe with the EL Curve on the Middle channel
And by using the Long channel, the 1.5cm x 15cm EL Stripe can reach to the top of the arm
This is how we recommend using the splitters:
A 4-way splitter coming straight from the driver
The First channel goes to the T Square
The Second and Third go to the 3-way 'Short, Medium and Long' splitter
One for the left and one for the right hand side:
EL Hoops (Short), EL Curve (Medium) and EL Stripe (Long)
The Fourth channel has an extender that leads to a 3 way splitter for the Sacral shapes and ID Disc
Its not complicated or fiddly - We've just given all those details if you want to plan your costume before you buy the set - feel free to message us if you have any questions.
The whole kit is ready to use - just plug and play!
OR CONTACT US IF YOU WANT ADVICE PLANNING YOUR SET
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.
- - - - - - - - - - - -
This El Tape comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver.
By using splitters you can also connect different strands to the same driver.
We have some crazy glowing masks & glasses that go well with this kit - take a look!