Buckle Driver for 1m EL Wire
This is a really handy small portable EL Driver that runs off of 3 x AG13 batteries (not supplied)
It is only: 6cm x 3.5cm x 1.3cm
It can run 1 metre of EL wire or 25squ cm or under,
The whole unit comes in two parts that each have a 2.5cm wide belt loop built in. These click together so the driver can easily be built into any rucksack or a thin belt
The driver has a button with 3 settings:
On / Flash / Off
This EL Driver has an 8cm output wire with a standard EL wire connector on the end.
Use this to connector plug in EL Wire or a Splitter.
*All the EL wire we supply comes with a connector, so they plug straight into the driver*
**EL Drivers contain an inverter that switches the current from DC to AC and increases the voltage - for this reason EL Drivers are often called EL Inverters - they are the same thing**
Using a splitter, this driver can run many strands and colours of EL wire as long as the total length of wire is 1 metre or under.
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.
- - - - - - - - - - - -
EL wire has loads of uses.
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.
-
The EL wire can be cut into smaller lengths and attached to another driver.
Or with some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed.
It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.
We're sure you will be amazed - feel free to message us with any questions.
These tiny EL Panels are really handy and can have so many uses.
They run off any EL Driver and you can 'daisy chain' splitters to have as many as you want lit up.
The item we offer to you is a versatile 2.4cm wide and 4.5cm long Electroluminescent Panel.
This panel comes with 10.5cm's wire lead and 9cm's of super thin FFC tape that's even thinner that the panel for great flexibility.
With a driver, these glow very brightly making them ideal for the eye piece in masks.
The panel itself is less than half a millimetre thick but is not see-through.
White, Light Blue, Red or Green
EL Tape is an incredibly versatile material it can be bent and wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape.
All our EL Wire and EL Tape has connectors attached so (with the right driver) it is just plug and play
Standard EL Tape with wires and connector
We have EL Panels and EL Tape in all sorts of shapes and sizes
Including animated and sound activated moving panels!
These tiny EL Panels are really handy and can have so many uses. They run off any EL Driver and you can 'daisy chain' Splitters to have as many as you want lit up.
The item we offer to you is a versatile 3cm wide and 5cm long Electroluminescent Panel.
With a Driver, these glow very brightly making them ideal for the eye pieces in masks.
The panel itself is less than half a millimetre thick but is not see-through.
The Panels are £2.99 each
In the drop down menu you can choose to have:
Single 3cm x 5cm EL Panels
2 x Panels plus a 2 Way Splitter
2 x Panels plus a 2 Way Splitter and a 2xAA battery operated Driver / Inverter
4 x Panels plus a 4 Way Splitter
Or 4 x Panels, plus a 4 Way Splitter and a 2xAA battery operated Driver / Inverter.
Other inverters, EL Panels, EL Tapes and EL Wire are available in our online store.
Or feel free to contact us if you have any questions.
The 3cm x 5cm are currently available in these colours:
Light Blue (Tron Blue), Red, Pink, Deep Pink, White, Grass Green and Deep Blue
EL Tape is an incredibly versatile material it can be bent and wrapped around things and can even have holes and shapes punched into it and be cut to your chosen shapes.
All our EL Wire and EL Tape has connectors already attached so, (with the right Driver), it is just plug and play
Standard EL Tape with wires and connector
We have EL Panels and EL Tapes in all sorts of shapes and sizes, including animated and sound activated moving EL Panels!
Waterproof and Sandproof Driver for 3m EL Wire
This small and portable Driver is completely waterproof and sandproof right up to the connector clip and takes 2 x AAA batteries (not supplied).
It is 'barrel shaped' and its dimensions are only: 11cm x 2.5cm, and it can light up to 3 metres of EL Wire.
This Driver has a button with 3 settings: On / Off / Flash
This EL Driver has an 8cm output wire with a standard EL wire connector attached.
Use this connector to plug in EL Wire or a Splitter
*All the EL wire we supply comes with a connector, so they plug straight into an EL Driver*
Using a Splitter, this Driver can run many strands and colours of EL wire as long as the total length of wire is 3 meters or under.
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.
EL wire has loads of uses!
This neon wire looks amazing when decorating the interior or exterior of cars, bicycles and trailers and can be used in the interior or exterior of the home. It can even be threaded into clothes and hats. It is a cliché to say you are only limited by your imagination but with EL wire it's true!
The EL wire can be cut into smaller lengths and attached to another Driver.
Or with some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed
If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours.
We're sure you will be amazed - feel free to message us with any questions you may have.
6cm or 10cm Diameter Round EL Panel
Here we have two separate items: either a 6cm or 10cm diameter circular EL Panel.
Ideal for backlighting dashboard gauges the EL Panel glows very brightly and can also be used for decoration or fancy-dress costumes
The Panel needs an Inverter/Driver to power it, and we have a choice of 4.2v, 6v, 9v and 12v drivers that are designed not to take up too much space if you are installing it as a backlight - or can be portable if it is for a costume.
Alternatively you can contact us with your needs, and we'll work out what would be best for you.
Currently, available in: Deep Blue, Green, Red, Light Blue, Pink or White
Please select which size of Round EL Panel you wish to purchase. Either in 6cm diameter or 10cm from the drop down menu below.
Detroit: Become Human Set
In this set is everything you need to turn into Kara, Connor or Markus
With this set you will get:
1) Two different 2cm flat glowing rings to go on the temple (one light blue, one red)
2) mini driver to power the small hoop
3) 2 x 7cm Triangles to attach to the outside of the cosplay outfit
4) 1 x 5cm x 35cm EL Tape to make a glowing armband
5) 50cm (1.5 foot) of El Wire to go round the collar
6) a portable driver that takes 8 x AA batteries to power the triangles, armband and EL Wire (and the temple hoop if desired)
7) splitters to easily join all the parts together
8) 50cm of sticky backed/sewable velcro so the armband and triangle can easily be attached to clothes
The whole of the set is plug and play, but you will need your own clothing to attach these pieces to
In this set is everything you need to turn your own normal hoodie into a glowing EL Wire hoodie
With this set you will get:
1) 1.5 metres of 3.2mm EL Wire to outline the hoodie
2) Trigger Driver so you can switch from 'glow mode' to 'incognito' using a switch in your sleeve
3) 30 x Clear Hoops to make it easy to attach the EL Wire to the hoodie and also make it removable so you can put it through the washing machine
The EL Wire outline is in a selection of colours:
Light Blue (Tron Blue), Deep Blue, Pink, Purple, Orange, Red, Yellow, Lime Green, Grass Green and White
We have some crazy glowing masks and glasses that go well with this kit - take a look!
EL Wire is a perfect material for making glowing neon effect signs
We have made this even better by developing an EL wire that contains a thin metal rod that helps it hold its shape
So making your own sign has never been easier
With this set you will get:
1) 3 metres of specialist Stiff EL Wire to easily shape into your own design
2) EL Driver with plunger switch to power the wire and give you an accessible on/off switch
3) 3 x fixing ties to help hold your sign in place
4) 30cm of heat shrink which you can use to black out any non-lit portion of your sign
5) Instructions with tips to help you make your sign
The whole of the set is plug and play, but you will need your own backing material or wall to attach your sign too
This is a glowing EL Panel triangle shape
The Triangle is 18cm along the base and 9cm high
each of the shorter edges are 12cm long
(it is basically a 12cm x 12cm square cut in half along the diagonal)
These are often used for the Iron Man Arc reactor or for other decoration
The Panel needs an Inverter/Driver to power it, and we have a choice of 4.2v, 6v, 9v and 12v drivers that are designed not to take up too much space if you are installing it as a backlight - or can be portable if it is for a costume.
Alternatively you can contact us with your needs, and we'll work out what would be best for you.
Currently, available in: Light Blue or White
Waterproof and Sandproof Driver for 3m EL Wire - WITHOUT EL Connector
This small portable driver is completely waterproof and sand-proof right up to the connector clip and takes 2xAAA batteries.
It is in the Bargain Bucket because it has no EL Connector on it
It does have an 8cm Wire coming from the top of the Driver, it just does not have a plug on the end
Some people remove the connector plugs so you may find this driver v useful
It is barrel shaped and only: 11cm x 2.5cm
It can run up to 3metres of EL Wire
The driver has a button with 3 settings:
On / Off / Flash
This EL Driver has an 8cm output wire that ends in bare wire
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.
- - - - - - - - - - - -
EL wire has loads of uses
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.
-
The EL wire can be cut into smaller lengths and attached to another driver.
Or with some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed
It is a cliche to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glowstick that lasts over 5,000 hours.
We're sure you will be amazed - feel free to message us with any questions.
Long Splitters for EL Wire
Extra long 2 and 3-way splitters for when you have got too carried away with your EL Project and perfection is beginning to tip over into obsession
These LONG Splitters are 20cm of wire up to the split - each channel is then 50cm long
-
Our full range of Speciality Splitters is:
SL: A two-way splitter - one short and one long,
SML: A three-way splitter - one short, one mid and one long,
SLL: A three-way splitter - one short and two long,
Mini Splitters: 2-way up to 6 way splitters that are 20cm in total length
Long Splitters: 2-way and 3-way splitters that are 70cm in total length
(standard splitters are 40cm in total length)
Splitter Switches: 2-way splitter with a switch in the middle that lets you isolate each channel
-
Of course all our Splitters, as well as the EL Wire, EL Tape, EL Panels and EL Drivers we supply come with universal EL Connectors attached
- - - - - - - - - - - -
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours
We're sure you will be amazed - feel free to message us with any questions
Multicoloured EL Wire @ £6 per metre
Here we have some beautiful EL Wire which is 5mm thick, with a colourful pattern and glows when the wire is attached to an EL Driver.
Other drivers for EL Wire than the ones listed above are available from our online store.
All of the EL Wire including this will already have an EL Connector attached.
This is what the wire looks like when lit.
This is what the EL Wire looks like close up.
Many strands of EL Wire can be connected to a single driver by using a splitter.
*It is not recommended to use a micro EL Driver for this multicoloured EL Wire. Because of the colourful sleeve, we recommend you use the brightest, most powerful driver you can*
- - - - - - - - - - - -
This wire comes with a standard connector so simply plugs into any EL inverter - this makes it easy to change between coloured wire on one inverter.
By using splitters you can also connect different strands to the same inverter.
EL wire has loads of uses
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.
This wire can be cut into smaller lengths and attached to another drivers.
Our drivers can run many different strips of wire as long as the total length of the wire is under the drivers maximum capacity.
With some care, the EL wire can be attached to thin electrical wire to make patterns or extend the wire over gaps where it isn't needed.
Joining tape and heat shrink tubing are also available if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver.
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will also definitely need some wire strippers.
You can happily use the joining tape and heat shrink tubing supplied for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle.
It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours.
We're sure you will be amazed - feel free to message us with any questions.
Dance Act EL Wire Set = 12 metres of EL Wire + Trigger Driver
Take Street Dance to a whole new level with this Glowing EL Wire Set with a hand controller to switch the lights On and Off
This set is for a 'plug and play' EL Wire and Driver - but you have to attach it to your own costume
With the set you get:
1) 2 pieces of 3 metres EL Wire
2) 6 pieces of 1 metre EL Wire
3) A 'Dance Act' Driver that has a 1.2m long power cord that runs down the arm allowing the performer to turn the lights on and off at will
This driver is powerful enough to make up to 15 metres of EL Wire glow.
4) plus several splitters (3 x 2-way, 2 x 4-way, a spare 5-way and 2 x extenders)
By 'daisy chaining' the splitters you can have all the lengths of EL Wire attached to this one driver
5) 50 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine
The EL Wire can be any combination of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Grass Green, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White
The whole kit is ready to use - just plug and play!
Our EL Wires in Action
Dimensions of the products:
If you are making a costume, it is important to plan it out properly.
For this Dance Act set, the driver is very powerful and so it comes with a separate power pack that takes 8 x AA batteries or a powerful rechargeable (3000mAh) Lithium-Ion Battery and battery charger (please choose the plug type you need)
So here are the dimensions of all the parts plus lengths of wire between them.
THE POWER PACK
Takes 8 x AA batteries (not supplied) and is 6.5cm x 6cm x 3cm
The Rechargeable Li-ion battery is smaller and lighter:
172g (7.3cm x 5.6cm x 2.2cm)
it has a 65cm thin power wire coming out of it that leads to the...
DRIVER
The driver is 6cm x 4cm x 4cm
It has a 1.2m long power lead coming out that ends with an ON/OFF plunger giving you the ability to control the light
It has a 55cm wire coming out of it that leads to a...
SPLITTER
The Splitters are 40cm long in total,
it is 20cm of wire which then splits into the separate strands which are all 20cm long
GLOWING EL WIRE
2 x 3 metres is for the body
6 x 1 metres is for the legs, arms and head
Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set
EL Wire Dance Act
The whole kit is ready to use - just plug and play!
We have some crazy glowing masks & glasses that go well with this kit - take a look!
Speciality Splitters for EL Wire
Speciality splitters are for when you get too carried away with your EL Project and perfection is beginning to tip over into obsession
These Speciality Splitters are 20cm of wire up to the split - thereafter the wire lengths vary on each splitter making them very versatile
:
SL: A two way splitter - one Short, one Long - The measurements of the 2 way SL Splitters are:
SML: A Three way splitter - one Short, One Mid and one Long - The measurements of the 3 way SML Splitters are:
SLL: A Three way splitter - one Short and Two Long - The measurements of the 3 way SLL Splitters are:
-
Other Splitters in our range are
Mini Splitters: 2-way up to 6 way splitters that are 20cm in total length
Long Splitters: 2-way and 3-way splitters that are 70cm in total length
(standard splitters are 40cm in total length)
Splitter Switches: 2-way splitter with a switch in the middle that lets you isolate each channel
-
Of course all our Splitters, as well as the EL Wire, EL Tape, EL Panels and EL Drivers we supply come with universal EL Connectors attached
- - - - - - - - - - - -
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours
We're sure you will be amazed - feel free to message us with any questions
Tron Double Hoop of EL Tape
Here we have a Tron Double Hoop shape that is 15cm long made from Electroluminescent Tape.
The First Hoop is 6cm Wide - the same as our single EL Hoops. The End hoop is just 4cm Wide
This shape is available in:
Light Blue (Tron Blue) and Orange
Double Hoops in Light Blue and Orange
This Double Hoop has been designed to help you achieve a realistic Tron costume.
All our El Wire and Tape comes with wires and connectors attached
Like all EL Tape and EL Wire the EL Double Hoop needs an EL Driver to make it glow - choose from the drop down menu or there is a selection available in our online store.
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.
The EL Double Hoops have loads of other creative uses but are especially good for making realistic Tron costumes
The EL Double Hoop is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration
We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.
If you want any help or advice in planning your EL costume feel free to get in touch.
A5 Cuttable EL Panel - Can be Cut Into Four Shapes
This is the latest breakthrough in helping people create their own glowing designs out of super-thin EL Panel - EL Panels are much thinner than a credit card (just 1/3mm thick) and glows beautifully.
This Cuttable A5 EL Panel is available in these colours:
White, Red, Light Blue and Green
To use this Panel, the first thing you must really think through is your design
If you have a pretty good idea what you want to make then you should decide whether you have to use this cuttable panel, or whether you can use one of our standard EL panels
If you simply have to have your EL shapes cut out then this cuttable panel is the thing for you
A5 cuttable EL Panel in Green
The shapes you cut will still need a driver/inverter to power them so you will need to decide on the best driver for you:
In the drop-down menu there is a choice of either mains powered and/or portable (8 x AA batteries) Driver. These are both capable of powering 400squ cm of EL Tape
Maybe the shapes you want to cut are tiny and you could use a smaller driver. In this case just choose NO DRIVER and, if you don't already have one, purchase a 2 x AA battery Driver here.
A 4 Way Splitter is also provided
There is a guide to cutting EL Panels in the tips section of our website:
How to Cut Electroluminescent Tape and Panels