1.3mm Fine 'Angel Hair' EL Wire @ £4 per Metre
This 'Angel Hair' EL Wire is a very light diameter of EL Wire, making it a fun and useful material to work with if you're attaching to light fabric.
EL Wire twisted into ringlets
EL Wire twisted into a zig-zag pattern
The colours we stock in this diameter are:
Light Blue (Tron Blue), Deep Blue, Pink, Orangey-Red, Yellow, Lime Green, Turquoise-Green and WhiteWhite
And in these lengths: 10cm / 50cm / 1 metre / 3 metre / 5 metre / 10 metre / 15 metre / 30 metre
This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same Driver.
By using Splitters you can also connect many strands of the glowing wire to the same Driver.
EL wire has loads of uses!
This neon wire looks amazing when decorating the interior or exterior of cars, it can be used inside and outside of the home and office and can even be threaded into clothes and hats.
Our Drivers can run many lengths of wire as long as the total length of the wire is under the Drivers maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed.
Joining tape and tubing for re-attaching the wire are available from this store
- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different Driver
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will definitely need some wire strippers
You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle
There are How-tos and a forum on the site to get some great tips
1.3mm Orange Fine 'Angel Hair' EL Wire @ half price (£2.00 per metre)
This 'Angel Hair' EL Wire is not only the brightest of all the thicknesses of EL Wire it is also the most malleable and will hold its shape when bent like a kind of neon modelling wire, making it a fun and useful material to work with.
EL Wire twisted into ringlets
EL Wire twisted into a zig-zag pattern
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED.
This listing is for Orange and available in these lengths: 10 centimetre and 3 metres.
This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same driver.
By using splitters you can also connect as many strands of the glowing wire to the same driver
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
This wire can be cut into smaller lengths and attached to another driver
Our drivers can run many strips of wire as long as the total length of the wire is under the drivers maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed
Joining tape and tubing for re-attaching the wire are available from this store
- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will also definitely need some wire strippers
You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle
There are How-tos and a forum on the site to get some great tips
2.3mm diameter EL Wire @ £2.50 per metre
The 2.3mm diameter Electroluminescent wire is our cheapest standard EL Wire,
it is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green, Turquoise-Green and White
300 metre lengths are only available in Lime, Light Blue, Deep Blue, Red and WhiteWhite
2.3mm diameter EL Wire is available in the following lengths:
1 metre, 3 metre, 5 metre, 15 metre, 10 metre, 100 metre and 300 metre
(The 3.2mm diameter wire is also available in 10 metre and 25 metre lengths)
Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White.
The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector on it so is ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our store
We take custom orders for custom lengths of EL Wire.
This wire comes with a standard connector already attached so simply plugs into any EL Driver.
By using 'Splitters' you can also connect different strands to just one Driver
EL wire has loads of uses!
It has an amazing neon string effect when decorating the interior or exterior of cars and motorbikes and can be used inside and outside of the home and office and can even be threaded into clothes and hats
Multicoloured EL Wire @ £6 per metre
Here we have some beautiful EL Wire which is 5mm thick, with a colourful pattern and glows when the wire is attached to an EL Driver.
Other drivers for EL Wire than the ones listed above are available from our online store.
All of the EL Wire including this will already have an EL Connector attached.
This is what the wire looks like when lit.
This is what the EL Wire looks like close up.
Many strands of EL Wire can be connected to a single driver by using a splitter.
*It is not recommended to use a micro EL Driver for this multicoloured EL Wire. Because of the colourful sleeve, we recommend you use the brightest, most powerful driver you can*
- - - - - - - - - - - -
This wire comes with a standard connector so simply plugs into any EL inverter - this makes it easy to change between coloured wire on one inverter.
By using splitters you can also connect different strands to the same inverter.
EL wire has loads of uses
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.
This wire can be cut into smaller lengths and attached to another drivers.
Our drivers can run many different strips of wire as long as the total length of the wire is under the drivers maximum capacity.
With some care, the EL wire can be attached to thin electrical wire to make patterns or extend the wire over gaps where it isn't needed.
Joining tape and heat shrink tubing are also available if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver.
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will also definitely need some wire strippers.
You can happily use the joining tape and heat shrink tubing supplied for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle.
It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours.
We're sure you will be amazed - feel free to message us with any questions.