1.0mm Fine EL Wire @ £5 per metre
This fine EL Wire is one of the brightest of all the types of EL Wire and is also very malleable and will hold its shape when bent like a kind of neon modelling wire, making it a fun and useful material to work with.
EL Wire twisted into ringlets
EL Wire twisted into a zig-zag pattern
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED.
The colours we have at present are:
Light Blue (Tron Blue), Mint Green and White
In these lengths:
50cm, 1metre, 3metre, 5metre, 10metre, 25metre and 30metre
- - - - - - - - - - - -
This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same driver.
By using splitters you can also connect as many strands of the glowing wire to the same driver
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
This wire can be cut into smaller lengths and attached to another driver
Our drivers can run many strips of wire as long as the total length of the wire is under the drivers maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed
Joining tape and tubing for re-attaching the wire are available from this store
- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will also definitely need some wire strippers
You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle
There are How-tos and a forum on the site to get some great tips
1.3mm Fine 'Angel Hair' EL Wire @ £4 per Metre
This 'Angel Hair' EL Wire is a very light diameter of EL Wire, making it a fun and useful material to work with if you're attaching to light fabric.
EL Wire twisted into ringlets
EL Wire twisted into a zig-zag pattern
The colours we stock in this diameter are:
Light Blue (Tron Blue), Deep Blue, Pink, Orangey-Red, Yellow, Lime Green, Turquoise-Green and WhiteWhite
And in these lengths: 10cm / 50cm / 1 metre / 3 metre / 5 metre / 10 metre / 15 metre / 30 metre
This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same Driver.
By using Splitters you can also connect many strands of the glowing wire to the same Driver.
EL wire has loads of uses!
This neon wire looks amazing when decorating the interior or exterior of cars, it can be used inside and outside of the home and office and can even be threaded into clothes and hats.
Our Drivers can run many lengths of wire as long as the total length of the wire is under the Drivers maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed.
Joining tape and tubing for re-attaching the wire are available from this store
- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different Driver
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will definitely need some wire strippers
You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle
There are How-tos and a forum on the site to get some great tips
1.3mm Orange Fine 'Angel Hair' EL Wire @ half price (£2.00 per metre)
This 'Angel Hair' EL Wire is not only the brightest of all the thicknesses of EL Wire it is also the most malleable and will hold its shape when bent like a kind of neon modelling wire, making it a fun and useful material to work with.
EL Wire twisted into ringlets
EL Wire twisted into a zig-zag pattern
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED.
This listing is for Orange and available in these lengths: 10 centimetre and 3 metres.
This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same driver.
By using splitters you can also connect as many strands of the glowing wire to the same driver
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
This wire can be cut into smaller lengths and attached to another driver
Our drivers can run many strips of wire as long as the total length of the wire is under the drivers maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed
Joining tape and tubing for re-attaching the wire are available from this store
- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will also definitely need some wire strippers
You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle
There are How-tos and a forum on the site to get some great tips