This listing is for 1.5cm wide and 20cm long Electroluminescent Tape.
This EL Ribbon needs a small inverter to power it - Visit our shop to see a selection of inverters and other EL goodies.
The Colour glows a beautiful Light Blue (Tron Blue), White or Red.
As you can see from the picture it is divided into segments; the exact dimensions are:
The Strip itself is 1.5cm x 20cm
The Glowing section of it is actually 1.1cm wide
First there is a 1.1cm x 4.7cm glowing block
Then a 0.4cm x 1.5cm joining section
Next are two blocks of 1.1cm x 3.5cm
Joined by two 0.4cm x 1.5cm sections
Finishing with a 1.1cm x4.2cm block
The wire to connect it to an inverter is 23cm long and has a standard EL Connector on the end.
EL Tape is an incredibly versatile material as it can be bent and wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape.
It can be sliced into smaller strips similar to EL wire (as with EL Wire, rejoining it again needs some care and attention)
We also have EL Tape available in the following sizes: 2cm x 25cm / 2cm x 40cm and 2cm x 1 metre lengths
EL Tape - 1.5cm x 15cm of EL Glow Tape
This listing is for a 1.5 cm wide and 15cm long Electro-Luminescent Tape.
Currently, in stock we have these colours: Light Blue (Tron Blue), Deep Blue, Red, Pink, Orange, Green and White
On the back of the EL Tape it has wires with connectors already attached
This EL Tape needs an Inverter/Driver to make it glow
The drop down menu gives you the options to buy this item with a 2 x AA battery inverter, 1 x AAA mini driver or no driver.
EL Tape is an incredibly versatile material it can be wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape
This Tape is also available in 2cm x 12cm, 25cm, 40 cm and 1 metre lengths
EL Tape - 2cm x 12cm - Neon Glow Strip
This is for a 2cm wide and 12cm long Electro-Luminescent Tape.
Currently, in stock we have these colours: Light Blue (Tron Blue), Deep Blue, Red, Pink, Deep Pink, Orange, Yellow, Green and White
On the back of the EL Tape it has wires with connectors already attached:
EL Tape is an incredibly versatile material it can be wrapped around things.
To join it to a costume we recommend our ''''sewable loop & stick-able hook'''' Velcro which allows you to sew one part of the Velcro to your costume while the stick pat goes on the back of this tape. The tape can then be removed from the costume to wash it
EL Tape can even have holes and shapes punched into it and be cut to your chosen shape
This Tape is also available in 25cm, 40cm and 1 metre lengths
A 2 x AA inverter can power four of these 12cm EL Tapes and an 8 x AA inverter can power just over 2 metres of EL Tape.
EL Tape - 2cm by 12cm With Bend Half Way
This is a 2cm wide and 12cm long Electroluminescent Tape with a 45º bend in the middle available in:
Light Blue (Tron Blue), Deep Blue, Pink, Deep Pink, Red, Orange, Grass Green and White
This EL Curve has been designed to help you achieve a realistic Tron costume.
As you can see in the picture below it is perfectly suited for use with straight EL Tape and the EL Hoops
EL Tape, Curve and Hoop in the Tron Style
All our El Wire and Tape comes with wires and connectors attached
Like all EL Tape and EL Wire the EL Curve needs an Inverter/Driver to make it glow
On this EL Curve, the wires are connected in the middle of the bend so either end can be cut to a shape you need
Standard EL Tape with wires and connector
We also stock a wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories
The EL Curves have loads of other creative uses but are especially good for making realistic Tron costumes
The EL Curve is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration
We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.
If you want any help or advice in planning your EL costume feel free to get in touch
EL Tape - 2cm x 25cm - Neon Glow Strip
This is for a 2cm wide and 25cm long Electro-Luminescent Tape.
Currently, in stock we have these colours: Light Blue (Tron Blue), Deep Blue, Red, Pink, Orange, Green and White
On the back of the EL Tape it has wires with connectors already attached:
EL Tape is an incredibly versatile material it can be wrapped around things.
To join it to a costume we recommend our ''sewable loop & stick-able-hook'' Velcro which allows you to sew one part of the Velcro to your costume while the stick pat goes on the back of this tape. The tape can then be removed from the costume to wash it
EL Tape can even have holes and shapes punched into it and be cut to your chosen shape
This Tape is also available in 12cm, 40cm and 1 metre lengths
The 2 x AA inverter can power two of these 25cm EL Tapes and the 8 x AA inverter can power just over 2 metres of EL Tape.
EL Tape - 2cm x 40cm - Neon Glow Strip
This is for a 2cm wide and 40cm long Electro-Luminescent Tape.
Currently, in stock we have these colours: Light Blue (Tron Blue), Deep Blue, Red, Orange, Green and White
On the back of the EL Tape it has wires with connectors already attached:
EL Tape is an incredibly versatile material it can be wrapped around things.
To join it to a costume we recommend our 'sewable loop & stick-able-hook' Velcro which allows you to sew one part of the Velcro to your costume while the sticky part goes on the back of this tape. The tape can then be removed from the costume to wash it.
EL Tape can even have holes and shapes punched into it and be cut to your chosen shape.
This Tape is also available in 12cm, 25cm and 1 metre lengths.
The Basic 2 x AA driver can power this 40cm EL Tape and the Adaptable 5-15m with the 8 x AA battery box option can power just over 2 metres of EL Tape.
EL Tape DOUBLE ENDED 2cm x 1 metre Cut to Make 2 Glowing Strips of Any Length
This is a versatile piece of 2cm wide and 1 metre long Electro-Luminescent Tape.
The EL Tape has wires with connectors attached to BOTH ENDS:
This means it can be cut into two pieces of any length you choose
A 2-way splitter is also provided so you can run both the EL Tapes off of one Driver/Inverter
When cutting EL Tape or Panel it is best to use sharp scissors or craft knife and to seal the cut afterwards with glue and/or clear tape
This EL tape is currently available in these colours:
Light Blue (Tron Blue), Deep Blue, Red, Pink, Deep Pink, Orange, Green, Yellow and White
In the drop down menu below is also the option to buy the EL Tape with a powerful portable driver (8 x AA batteries)
This driver/inverter is powerful enough to drive just over 2 metres of this EL Tape in total and will make the Tape plug and play
(If it is more convenient to have a car-lighter attachment instead of the 8 x AA battery box to power this driver please let us know)
In this store there is a whole selection of drivers available that could power this EL Tape such as Sequencer or Sound Activated Drivers
3cm x 1 metre DOUBLE ENDED EL Tape Cut to Make 2 Strips of Any Length
With this 'double ended' EL Tape you end up with two pieces of EL Wire for the price of one! - just cut it in half.
This is a 3cm wide and 1 metre long strip of Electro-Luminescent Tape.
*The full Glow area of the Tape is 2.3cm x 1 metre*
The EL Tape has a connector attached to BOTH ENDS:
This means it can be cut into two pieces of any length you choose.
A 2 Way Splitter is also provided so you can run both the EL Tapes from just one driver.
When cutting EL Tapes or Panels, it is best to use sharp scissors and to seal the cut afterwards with glue and/or clear nail varnish.
We stock the following colours:
Light Blue (Tron Blue), Red, Green, White and Deep Blue
In the drop down menu is also the option to buy the EL Tape with a powerful mains powered or portable Driver (8xAA batteries)
These Drivers are powerful enough to drive about 1 1/2 metre of this (3cm x 1metre) EL Tape in total and will make the Tape plug and play
(If it is more convenient to have a car-lighter attachment instead of the 8xAA Battery Box to power this driver please let us know)
There is a whole selection of Drivers available at EL Wire Craft that could power this EL Tape such as Sequencer or Sound Activated Drivers.
EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it.
EL Tape 5cm x 35cm single connector
This is a 5 cm wide and 35cm long strip of glowing Electroluminescent Tape.
It is ideal for using as an arm band for Detroit: Become Human cosplay
If needed, this EL Panel can be cut down to size using sharp scissors.
When cutting EL Tape or Panel it is best to use sharp scissors or craft knife and to seal the cut afterwards with glue and/or clear tape.
This EL Panel is available in Light Blue (Tron Blue) and White.
In the drop down menu, you'll have the option to buy the EL Tape with a powerful mains powered or portable Driver (8xAA batteries)
These Drivers are powerful enough to drive two of these EL Tapes in total and will make the Tape plug and play
There is a whole selection of drivers available at El Wire Craft that could power this EL Tape such as Sequencer or Sound Activated Drivers.
EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it.
This is a 2cm wide and 12cm long Electroluminescent Tape zigzag shape
Available in:
Light Blue (Tron Blue), and White.
All our El Wire and Tape comes with wires and connectors attached
Like all EL Tape and EL Wire the EL Zigzag needs an Inverter/Driver to make it glow
Standard EL Tape with wires and connector
We also stock a wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories
The EL Curves have loads of other creative uses but are especially good for making realistic Tron costumes
The EL Curve is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration
We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.
If you want any help or advice in planning your EL costume feel free to get in touch
Angled Shape for Tron Costume 40cm
These 2cm x 40cm angled EL Tapes are made for the legs of our Tron Costumes, Sam Flynn, Quorra and Gem.
It can also be used on other parts of a costume such as the back, arms or neck. EL Tape glows brightly and looks really striking. This piece is available in
Light Blue (Tron Blue)
If you are making a costume it is a good idea to plan it out properly.This EL Tape is available with or without a Driver
The EL Tape is angled so is 37 cm from top to tail - and traditionally was designed to go on the leg of our Tron costume but can be used anywhere.The EL Tape is just 350 microns thick - that is 1/3rd of a millimetre!
If you order two pieces with a Driver, you will also receive a 2 Way Splitter, free of charge.
The Driver that is offered is a powerful 8 x AA battery portable Driver/Inverter, capable of powering 6 pieces of this EL Tape.
If it is to be part of a larger EL project then you would be better off with a more powerful Driver and some Splitters - there is a selection available in our online store.
All our EL Wire and EL Tape has connectors already attached so (with the right Driver) it is just plug and play!
Standard EL Tape with wires and connector
This EL Shape is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration.
Curved Shape for Tron Costume 40cm
This is a 2cm x 40cm piece of EL Tape curved to go round the ID Disc and over the shoulder
It can also be used on other parts of a costume such as the legs, arm or neck EL Tape glows brightly and looks really striking. This piece is available in
Light Blue (Tron Blue)
Dimensions of the products:
If you are making a costume it is a good idea to plan it out properly.
This EL Tape is available with or without a powerful driver
2cm x 40cm Curved Outline
The EL Tape is curved so is 37 cm from top to tail - it has been designed to go on the back round the ID disc and curve over the shoulder
The tape is just 350 microns thick - that is 1/3rd of a millimetre!
If you order two pieces then it will come with a free 2-way splitter
The Driver that is offered is a powerful 8 x AA battery portable Driver/Inverter, capable of powering 6 pieces of this EL Tape
If it is to be part of a larger EL project then you would be better off with a more powerful driver and some splitters - there is a selection available in our online store.
All our EL Wire and EL Tape has a connectors attached so (with the right driver) it is just plug and play!
Standard EL Tape with wires and connector
Replacement EL Backlight 25mm x 120mm for Realistic Scanner
This EL Panel is 25mm wide (with a lit area of 23mm) and 120mm long.
It has been designed to fit most Realistic scanner models but will also backlight any device with similar screen size
12cm may be too long for most models, so just cut it down to size with sharp scissors and reseal 'cut' edges with glue before installing.
There are a choice of connectors on either end depending what is most convenient for the device
There is a jumper connection on the left and on the right is thin FPC tape that can also easily be soldered onto - just cut off the one you don't need
On the left - Jumper Connector
On the right - FPC Connector
These Electroluminescent Tape backlight panels are available in:
Light Blue (Tron Blue), Deep Blue, Pink, Red, Orange, Yellow and White
We have plenty of other shaped EL Tapes and Panels if this one is not quite right in our store
EL Tape and Panels need an Inverter to make them glow - if you are replacing an EL Backlight then you simply wire the EL Panel into the inverter that is already in the machine
If you are creating an EL Backlight where there wasn't one before you will need to also insert a small inverter/driver
Comprehensive instructions for replacing backlights are available on YouTube
The EL Panels and EL Tape is paper thin (about 1/3 of a millimetre!) so it is incredibly versatile and can be used for a variety of uses
We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.