Velcro - ? 2.00/m for attaching EL tape or EL panel to a fancy dress costume

This handy item is ideal for attaching EL Tape or EL Panels to clothing.

This Velcro has a sticky-back side that will stick firmly to the EL Tape or EL Panel.

The other part of the Velcro can be sewn onto the costume.

This makes it easy to remove the EL Panel for washing and general care.

The Velcro is 2cm Wide and 1 metre long

- - - - - - - - -

el wire and el tape

Join Power Cables with Self Stripping Wire Connectors (pack of 2)

These small clips are known as "Self Stripping Wire Connectors"

When used with an EL Wire setup they have one very specific purpose:

If you need to hook your 12v EL Driver onto the 12v lighting loom of a vehicle, by using these connectors you do not have to do any soldering to attach the wire.

 

To use the connectors is easy:

1) The +ve and -ve each need their own connector

2) Just lay the wire from the vehicle you want to attach to inside the connector

3) Then put the wire from the driver next to it

4) Close the connector to complete the circuit and join the wires

 

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

el wire and el tape

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

If you have not seen it before it is like a really long glow-stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Clip Peg for EL Wire

Finally, an end to sewing/gluing EL Wire misery!

Yes, are you to lazy, busy or cool to sew or glue?

or maybe you just want a simple solution to attach EL Wire that isn't permanent?

For this and many other solutions we have made the EL Wire Peg Clip!

Clip for EL Wire

Clip for EL Wire

These design is similar to headphone/mic cable clips - but these EL Clips are able to securely hold most EL Wire types (1.3mm, 2.3mm, 3.2mm and ULTRA 2.6mm)

The El Wire is very securely held in place and the powerful spring on the clip itself gives it a very tight grip on whatever it is pegged on to

The Clips can securely hold one or two El Wires at a time

 

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

el wire and el tape

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Festival Party Set - 3 x 1 metres of 3.2mm EL Glowing Wire + Driver

The first (and perhaps only) rule of making an amazing glowing EL outfit for a festival is:

Design it so you can go to the toilet easily!!!

This listing is for 3 metres (3 x 1m lengths) of 3.2mm Electro - Luminescent Wire, a portable driver and a 3 way splitter.

The splitter lets you have 3 x 1 metre lengths of EL Wire attached to one driver/inverter.

This 3.2mm EL Wire can be any combination of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Grass Green, Turquoise-Green and White.

It is vibrant and malleable!

Please send a note with your order if you want different colours.

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the Red and Purple as they have to be filtered the most to get the colours right.

EL Driver

The Driver takes 2 x AA batteries (batteries not supplied) - it works by having a built-in voltage inverter that 'inverts' the 3 Volts from the batteries up to the 100 Volts needed to make the EL Wire glow.

This Driver is 9cm x 3.2cm x 2cm with a button for the 4 modes - Off, On, Fast Flash and Strobe.

It has 8cm of wire coming out of it that leads to the...

SPLITTER

The Splitter is 40cm long in total. It has 20cm of wire which then splits into 3 separate strands which are all 20cm long and lead to the...

EL WIRE

There is then another 20-25cm from the connector until the actual glowing start of EL Wire - then there is 3 X 1 metres of gorgeous glowing wire!

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set

This set can turn any item of clothing into a party outfit.

The whole kit is ready to use - just plug and play!

- - - - - - - - - - - -

This wire comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver

By using splitters you can also connect different strands to the same driver.

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

This wire can be cut into smaller lengths and attached to another driver.

Our drivers can run many strips of wire as long as the total length of the wire is under the driver's maximum capacity (in this case under 5m).

With some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed.

Joining tape and heat-shrink tubing are also available if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver.

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.

You will also definitely need some wire-strippers.

You can happily use the joining tape and heat shrink tubing supplied for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle.

el wire and el tape

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.

We're sure you will be amazed - feel free to message us with any questions.

We have some crazy glowing masks and glasses that go well with this kit - take a look!

Glow EL Wire Alien Halloween Set

Make your own eerie glowing Alien Face mask using this set supplied:

1 metre of high brightness 3.2mm EL wire to outline the Aliens face

1 metre of 1.5mm Maxi EL Wire to make the shape of the eyes

Portable 2 x AA inverter with continuous or strobe setting

3 way splitter - you only need 2, but you will have an option to add more wire to your mask at a later date

Wire twist ties to help attach the wire to your mask

Advice on making the mask:

making an el wire alien mask

Making an EL Glowing Alien Mask

Aliens don't have to be green - choose from a selection of colours

Light Blue (Tron Blue), Deep Blue, Pink, Red, Orange, Yellow, Lime Green and White

Because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the Red and Purple as they have to be filtered the most to get the colours right.

-

This wire comes with a standard connector so simply plugs into any EL inverter - this makes it easy to change between coloured wire on one driver.

By using splitters you can also connect different strands to the same driver.

- - - - - - - - - - - - - - - - - - - - - - - -

el wire and el tape

EL wire has loads of uses and comes in different thickness and even in thin strips and panels.

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes, hair and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours.

We're sure you will be amazed - feel free to message us with any questions.

Mini EL Wire Set = 5 x 10cm EL Wire + Mini Driver

This EL Set is perfect to add to hats or even just loose in hair.

It can also make an amazing hanging flower decoration - anyway we can't guess what you crazy people are gonna use it for, all we really need to tell you is that this set includes:

1) A Mini 1 x AAA Driver (battery not supplied), for up to 1 metre of  EL Wire (4.8cm x 2.5cm x 1.4cm)

This has a switch on the side that allows you to choose between

Flashing - Continuous On - Off

2) 5 Pieces of 10cm EL Wire in your choice of colours (these wires have a 5cm connector wire on them)

3) a Mini 5 Way Splitter (this is 10cm long in total)

10cm el wire

The EL Wire is available in these colours: (send us a message with your choice)

Light Blue (Tron Blue), Lime Green, Pink, Red, Orange, Purple, yellow, Deep Blue, Turquoise-Green and White

el wire and el tape

EL Panel Illuminated Backlight for Spektrum DX6i and DX7 Controllers (may fit other models)

Ladies and/or Gentlemen may we present an Electroluminescent Panel and Driver/Inverter for the Spektrum controllers DX6i and DX7.

For the DX7 you will need to trim a little off the bottom of this Panel, (use sharp scissors and not a scalpel blade), and ensure that you reseal any 'cut' edges with glue before installing.

For the DX6i you will need to cut a little off the end of the Panel.

(For other models you will need to measure the screen size to see if it will fit)

The Panel size is 85mm x 55mm with a lit area of 80mm x 50mm.

The Driver should be powered straight from the device you are backlighting.

We have a choice of tiny waterproof 4.5v, 6v, 9v or 12v Drivers that are designed to be as small as possible so as not to take up too much space (29mm x 19mm x 24mm (L x W x H))

If you need help, please contact us with your requirements, and we'll work out what would be best for you.

Installing an EL Panel as a Backlight is a fairly easy procedure that basically involves accessing the screen of your device, cutting the EL Panel to the desired size, then wiring the Driver so it is powered by the device, then finally putting it all back together.

There are plenty of walk-through videos on YouTube showing step by steps on how to install an EL Backlight.

The following colours are currently available:

Deep Blue, Red, Light Blue, White, Pink, Orange and Green

EL Panels

EL Tape is an incredibly versatile material ithat can be bent and wrapped around things.

It can even have holes and shapes punched into it and be cut to your chosen shape.

(Please be careful not to cut too much of the outer electrode off)

We have EL Panels and EL Tapes in all sorts of  sizes and colours; including animated and sound activated moving Panels.

el wire and el tape

0
0
Your Cart
Your cart is emptyReturn to Shop