These tiny EL Panels are really handy and can have so many uses.
They run off any EL Driver and you can 'daisy chain' splitters to have as many as you want lit up.
The item we offer to you is a versatile 2.4cm wide and 4.5cm long Electroluminescent Panel.
This panel comes with 10.5cm's wire lead and 9cm's of super thin FFC tape that's even thinner that the panel for great flexibility.
With a driver, these glow very brightly making them ideal for the eye piece in masks.
The panel itself is less than half a millimetre thick but is not see-through.
White, Light Blue, Red or Green
EL Tape is an incredibly versatile material it can be bent and wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape.
All our EL Wire and EL Tape has connectors attached so (with the right driver) it is just plug and play
Standard EL Tape with wires and connector
We have EL Panels and EL Tape in all sorts of shapes and sizes
Including animated and sound activated moving panels!
Replacement EL Backlight 25mm x 120mm for Realistic Scanner
This EL Panel is 25mm wide (with a lit area of 23mm) and 120mm long.
It has been designed to fit most Realistic scanner models but will also backlight any device with similar screen size
12cm may be too long for most models, so just cut it down to size with sharp scissors and reseal 'cut' edges with glue before installing.
There are a choice of connectors on either end depending what is most convenient for the device
There is a jumper connection on the left and on the right is thin FPC tape that can also easily be soldered onto - just cut off the one you don't need
On the left - Jumper Connector
On the right - FPC Connector
These Electroluminescent Tape backlight panels are available in:
Light Blue (Tron Blue), Deep Blue, Pink, Red, Orange, Yellow and White
We have plenty of other shaped EL Tapes and Panels if this one is not quite right in our store
EL Tape and Panels need an Inverter to make them glow - if you are replacing an EL Backlight then you simply wire the EL Panel into the inverter that is already in the machine
If you are creating an EL Backlight where there wasn't one before you will need to also insert a small inverter/driver
Comprehensive instructions for replacing backlights are available on YouTube
The EL Panels and EL Tape is paper thin (about 1/3 of a millimetre!) so it is incredibly versatile and can be used for a variety of uses
We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.