EL Iron Man Body Set = EL Panel Arc Reactor + Hand Repulsors
Our Iron Man Sets supply you with 'plug and play' EL Panels, splitters and driver to help you build a glowing Iron Man Costume
With this kit you get:
1) 2 pieces of 3cm Diameter EL Panel for the Hand Repulsors
2) Plus a 10cm diameter round (or triangle shaped) white EL Panel for the Arc Reactor
3) Also a 2 x AA battery driver/inverter with switch to power the panels
4) And specialist 3 way splitter and 2 x 1.2m extenders to get power to the round panels down on the hands
EL Panels for the Hand Repulsor
The suggested setup is:
The Driver/Inverter is held on the body near the chest
A Three-way-splitter comes out and one channel goes off to the round panel acting as the Arc Reactor near the chest
The other two channels are longer and these have 1.2m extender wires attached to them to run down each arm to take power to the EL Panels for the Hand Repulsor
We have some crazy glowing masks & glasses that go well with this kit - take a look!
EL Iron Man Set = EL Tape Glowing Eyes + EL Panel Arc Reactor
The Iron Man Set is here to supply you with 'plug and play' EL Panels, splitters and driver to help you build a glowing Iron Man Costume
With this kit you get:
1) 2 pieces of 3cm x 5cm EL Panel for the Iron Man eyes in a choice of colours:
Light Blue, White, Red, Deep Blue and Pink
2) Plus a 10cm diameter round white EL Panel for the Arc Reactor
3) Also a 2 x AA battery driver/inverter with switch to power the panels
4) And 2 lots of 2 way splitters help the panels fit the costume
The suggested setup is:
The Driver/Inverter is held on the body near the chest
One two-way-splitter comes out and one channel goes off to the round panel acting as the Arc Reactor near the chest
The other channel has a second two-way splitter going off to the helmet to power the 3cm x 5cm EL Panels for the eyes
By having it on a second 2-way-splitter it makes it easier to unplug and remove the helmet - if it all runs off a 3-way-splitter, which it could, it would not be so easy to unplug the head mask
The kit does not include the mask or and its best to put a design over the glowing Arc Reactor - apart from that, the whole kit is ready to use - just plug and play!