EL Tape TRON SET = 2 x 40cm EL Tape + EL Hoops + EL Wire + Driver

This amazing item consists of:

1) 2 pieces of 2cm x 40cm EL Tape,

2) 4 x 6cm EL Hoops,

3) 2 pieces of 1m x 1.5mm EL Wire,

4) 2 x 4-way splitters and a 2-way splitter,

5) and a powerful portable Driver/Inverter with either an 8xAA battery box (batteries not supplied) or a 3000mAh rechargeable Li-ion battery (only available in the UK due to airmail postal restrictions),

6) It also comes with 80cm of Velcro - sticky on one side and sewable on the other to help you attach the tape and hoops to a costume

The EL Wire can be any combination of these colours:

Light Blue (Tron Blue), White and Orange

The whole kit is ready to use - just plug and play!

Dimensions of the products:

If you are making a costume, it is a good idea to plan it out properly.

For this set, the driver is very powerful and comes with a separate power pack.

So here are the dimensions of all the parts plus lengths of wire between them.

Feel free to message us if you have any questions.

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 6.5cm x 6cm x 3cm

it has a 65cm thin power wire coming out of it that leads to the...

DRIVER

The driver is 6cm x 4cm x 4cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The Splitter is 40cm long in total,

it is 20cm of wire which then splits into 3 separate strands which are all 20cm long - 2 of them then lead to...

2 x EL TAPE

The EL Tape has a metre of wire on it before the 2cm X 40cm super-bright glow of the EL Tape

The tape is just 350 microns thick - that is 1/3rd of a millimetre!

Sticky back Velcro is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky

You must sew the other part of the Velcro onto the costume making it very convenient to attach and remove

Of course, you don't need to use the Velcro and can fix it any way you choose

EL HOOPS

Two channels of the splitter lead to these glowing discs of EL Tape onto the shoulders

These 6cm diameter hoops also come with sticky back Velcro discs to attach them to your costume

EL WIRE

This thin but very bright EL Wire gives an amazing effect as it runs from the hoop near the collar, over the shoulder, down the back and round the waist where it meets the other EL Hoop

SPLITTERS

This is how we recommend using the splitters:
The end connector from both 40cm tapes, and the two 'collar' Hoops all connect to a 4-way splitter

The connectors from the Hoops on the waist and the end of the angel hair wire all connect up to a 4-way splitter

The 4-way splitters then connect up to the 2-way splitter and that connects to the driver - simple! 😉

Its not complicated or fiddly - we've just given all those details if you want to plan your costume before you buy the set - feel free to message us if you have any questions.

The whole kit is ready to use - just plug and play!

We have some crazy glowing masks & glasses that go well with this kit - take a look!

- - - - - - - - - - - -

This El Tape comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one inverter

By using splitters you can also connect different strands to the same driver.

Splitter for 2.1mm/5.5mm 12V LED power supply - use 1 power supply

Here we have splitters for a 2.1mm/5.5mm 12v LED power supply.

This is extremely useful if you have multiple LED emitters, light sources or drivers that you want to run off a single power supply.

The total length of the splitter is 400mm with 190mm before the split.

These splitters are available in:

2 way (useful for powering 2 x LED emitters from 1 x power supply),

3 way (useful for powering 3 x LED emitters from 1 x power supply),

4 way (for powering 4 x LED emitters from 1 x power supply),

5 way (for powering 5 x LED light sources from 1 x power supply),

6 way (for powering 6 x LED light sources from 1 x power supply) and

8 way (for powering 8 x LED light sources from 1 x power supply).

Please select your preferred option from the drop down menu.

Feel free to message us with any questions.

Splitter For 2.1mm/5.5mm 12v power supply

This is a 2 Way 12v Splitter for a 2.1mm/5.5mm 12v Input

This is useful if you have two 12v Drivers that you want to power from a single power input.

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats.

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions you may have.

Splitter for 2.1mm/5.5mm 12V power supply - use 1 power supply

Here we have splitters for a 2.1mm/5.5mm 12v power supply.

This is extremely useful if you have multiple EL drivers that you want to run off a single power supply.

The total length of the splitter is 400mm with 190mm before the split.

These splitters are available in:

2 way (useful for powering 2 x EL drivers from 1 x power supply),

3 way (useful for powering 3 x EL drivers from 1 x power supply),

4 way (for powering 4 x EL drivers from 1 x power supply),

5 way (for powering 5 x EL drivers from 1 x power supply),

6 way (for powering 6 x EL drivers from 1 x power supply) and

8 way (for powering 8 x EL drivers from 1 x power supply).

Please select your preferred option from the drop down menu.

Feel free to message us with any questions.

Car Lighter Attachment for EL Wire inverter

This is a fused Car Lighter Attachment that plugs in to a 2.1mm/5.5mm Jack Plug, making it suitable for powering any of our 12v EL Drivers

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire, have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Crocodile Clips Attached to a 2.1mm/5.5mm Jack Plug

These are simply crocodile clips attached to a 2.1mm/5.5mm Jack Plug, to allow you to power off of an external 12v Battery

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

1cm x 2m el tape-light blue

personal order for 1cm x 2m el tape - light blue

thanks

Dave

24mm x 99mm El Backlight for Sewing Machine

24mm x 99mm el panel £9.99

thanks
Dave

4 sets of el drivers

balance of payment

£300 - you will have to use a shipping option of tracked airmail ( £10 )

4 sets of el panels

£140 - you will have to use a shipping option of tracked airmail ( £10 )

AV Discounted Backlight

this is custom order for discounted backlight

please chose the £8 special delivery at the checkout

thanks
Dave

Custom EL Wires (set of 5)

custom el wires

each set of five consists of:

10pcs light blue 1.3mm 67cm long 8cm connector FEMALE micro JST
5pcs light blue 1.3mm 59cm long 7cm connector MALE micro JST
5pcs orange 1.5mm maxi 18cm long 26cm connector MALE micro JST

thanks
Dave

custom nike el panel

we now have a new listing here:

custom nike el panels

custom nike el panels

Hello and welcome - this is an 'invite only' listing for the Nike EL Panels

we have made some improvements to these Panels:

the Nike EL Panels are sold in pairs

they are slightly slimmer and now have a 'left' and a 'right' side where the connector comes in

making it easier to fit

the colour of the Nike panel now also exactly matches the cresent parts

(also paired as left and right)

if you order the Nike and crescent with the drivers

we will include a mini splitter

so both can be run off the same driver

the drivers can be bought separately here:

Portable Mini Driver for 1 metre EL Wire or 50sq cm EL Tapes/Panels

Custom order - 100pcs green el panel

here is the listing for 2 sets of 50pcs el panel

shipping has not been included

so please add your shipping option at checkout

thanks

Dave

thanks
Dave

Custom order - Aeronautica - INV 12385A-1

here is the invoice to pay a portion of INV12385A

it is divided into 3 invoices

INV12385A-1 = £700

INV12385A-2 = £750

INV12385A-3 = £850

total for INV12385A= £2300

thanks
Dave