10 End Caps For EL Wire - 1.3mm, 2.3mm, 3.2mm or 5mm

This handy item is 10 pack End Caps of the main sizes of EL Wire.

(1.3mm, 2.3mm, 3.2mm or 5mm)

The thing about these end caps is that they actually cost us little money, so we feel a bit rude for selling them.

We've put it as free postage (UK only), and we'll do that first class so that's 65 pence down - so I guess you're paying 35p for us to find the bag with them in, count out 10 and then put them in an envelope.

We also stock a wide range of EL wire in all colours and drivers/inverters that run different lengths of EL wire from 1m to 300m which can be portable, run off car cigarette lighters, mains or even USB ports.

*ALL the EL wire we supply comes with a connector, so they plug straight into the inverter*

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and office and can even be threaded into clothes and hats.

It is a cliché to say you are only limited by your imagination but with EL wire it is true.

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.

We're sure you will be amazed - feel free to message us with any questions you may have.

Mains PSU - EU mains to 12V

This is a plug that goes into the mains power and then converts mains AC power to 12V DC which is what many of our EL Drivers are powered by.

Since EL Wire is very low power, we only have these power supply units that output a maximum of 1A.

These power supply units are recommended to be used with our adaptable drivers.

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Mains Powered PSU - UK Plug 240V to 12V

This is a UK Plug that goes into the mains power

It then converts the UK mains to 12V DC which is what many of our EL Drivers are powered by

Since EL Wire is very low power, we only have these power supply units that output a maximum of 1A

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses:

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Mains PSU - US mains to 12V

This is a plug that goes into the mains power and then converts the AC power to 12V DC which is what many of our EL Drivers are powered by.

Since EL Wire is very low power, we only have these power supply units that output a maximum of 1A.

These power supply units are recommended to be used with our adaptable drivers.

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

1A Li-ion Battery Charger

This dedicated 1A mains Li-ion intelligent charger is the recommended charging method for our range of Li-ion batteries.

It is supplied with a UK plug.

Specifications are:
Input: 100 - 240V AC 0.8A 50/60hz.
Output: 12.6 V DC 1000mA

This charger is also available in a 2A version.

New Square Glowing Uber Logo

No-one will be able to miss you with this glowing UBER sign with a choice of power inputs

This thin glowing sign is 10cm x 10cm

It is legal to display as it glows white, and if positioned at the edge of the windscreen is small enough so it cannot be classed as blocking the drivers view.

Available with or without a sticky front to make it easier to attach to your windscreen.

The reverse of this sign is backed with a protective layer and is printed with the drivers logo as below, this side does not glow.

The sign has a choice of power inputs:

1) Runs off a small 2xAA battery box (£12 - batteries not supplied)

this has flashing and 'constant on' modes

2) Plug it into your cigarette lighter (£14.50)

this option has a switch that is on a long lead and can be placed where you want

(no flashing option)

3) Plug it into your USB port (£14.50)

this option has a switch that is on a long lead and can be placed where you want

(no flashing option)

If you are running it from the 2 x AA battery box, cigarette lighter or USB we will provide a 50cm extension lead to make sure you can easily stretch from the power source to the glowing sign on the corner of the windscreen

How the sign looks, lit and unlit

We hope you will find this animated panel useful for attracting the attention of riders even from a distance

This animated sign is made of EL Panel
It is less than 1/3mm thick and is robust, splash proof and can even be bent round shapes - must be seen to be believed!

2A Li-ion Battery Charger

This dedicated 2A mains Li-ion intelligent charger is the recommended charging method for our range of Li-ion batteries.

It is supplied with a UK plug.

Specifications are:
Input: 100 - 240V AC 1A 50/60hz.
Output: 12.6 V DC 2000mA

This charger is also available in a 1A version.

Figure of 8 power cable with UK Plug (IEC C7) packs

This is a Figure of 8 power cable with a 13 amp fused UK Plug (IEC C7).

Can be used to power any of our Excel drivers or any other device that require a figure of 8 power input.

The plug comes with a 1.3 metre cable and is available in packs of 3, 5 and 10.

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Long Glowing Uber Logo

No-one will be able to miss you with this glowing UBER sign with a choice of power inputs

This thin glowing sign is 24cm long x 4cm high

It is legal to display as it glows white, and if positioned at the edge of the windscreen is small enough so it cannot be classed as blocking the drivers view.

Available with or without a sticky front to make it easier to attach to your windscreen.

The sign has a choice of power inputs:

1) Runs off a small 2 x AA battery box - batteries not supplied (£10)

this has flashing and 'constant on' modes

2) Plug it into your cigarette lighter (£12.50)

this option has a switch that is on a long lead and can be placed where you want

(no flashing option)

3) Plug it into your USB port (£12.50)

this option has a switch that is on a long lead and can be placed where you want

(no flashing option)

if you are running it from the cigarette lighter or USB we will provide extension leads to make sure you can easily stretch from the power source to the glowing sign on the corner of the windscreen

How the sign looks, lit and unlit:

We hope you will find this animated panel useful for attracting the attention of riders even from a distance

This animated sign is made out of EL Panel
It is less than 1/3mm thick and is robust, splash proof and can even be bent round shapes - must be seen to be believed!

Join Power Cables with Self Stripping Wire Connectors (pack of 2)

These small clips are known as "Self Stripping Wire Connectors"

When used with an EL Wire setup they have one very specific purpose:

If you need to hook your 12v EL Driver onto the 12v lighting loom of a vehicle, by using these connectors you do not have to do any soldering to attach the wire.

To use the connectors is easy:

1) The +ve and -ve each need their own connector

2) Just lay the wire from the vehicle you want to attach to inside the connector

3) Then put the wire from the driver next to it

4) Close the connector to complete the circuit and join the wires

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow-stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Clip Peg for EL Wire

Finally, an end to sewing/gluing EL Wire misery!

Yes, are you to lazy, busy or cool to sew or glue?

or maybe you just want a simple solution to attach EL Wire that isn't permanent?

For this and many other solutions we have made the EL Wire Peg Clip!

Clip for EL Wire

These design is similar to headphone/mic cable clips - but these EL Clips are able to securely hold most EL Wire types (1.3mm, 2.3mm, 3.2mm and ULTRA 2.6mm)

The El Wire is very securely held in place and the powerful spring on the clip itself gives it a very tight grip on whatever it is pegged on to

The Clips can securely hold one or two El Wires at a time

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Festival Party Set - 3 x 1 metres of 3.2mm EL Glowing Wire + Driver

The first (and perhaps only) rule of making an amazing glowing EL outfit for a festival is:

Design it so you can go to the toilet easily!!!

This listing is for 3 metres (3 x 1m lengths) of 3.2mm Electro - Luminescent Wire, a portable driver and a 3 way splitter.

The splitter lets you have 3 x 1 metre lengths of EL Wire attached to one driver/inverter.

This 3.2mm EL Wire can be any combination of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Grass Green, Turquoise-Green and White.

It is vibrant and malleable!

Please send a note with your order if you want different colours.

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the Red and Purple as they have to be filtered the most to get the colours right.

EL Driver

The Driver takes 2 x AA batteries (batteries not supplied) - it works by having a built-in voltage inverter that 'inverts' the 3 Volts from the batteries up to the 100 Volts needed to make the EL Wire glow.

This Driver is 9cm x 3.2cm x 2cm with a button for the 4 modes - Off, On, Fast Flash and Strobe.

It has 8cm of wire coming out of it that leads to the...

SPLITTER

The Splitter is 40cm long in total. It has 20cm of wire which then splits into 3 separate strands which are all 20cm long and lead to the...

EL WIRE

There is then another 20-25cm from the connector until the actual glowing start of EL Wire - then there is 3 X 1 metres of gorgeous glowing wire!

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set

This set can turn any item of clothing into a party outfit.

The whole kit is ready to use - just plug and play!

- - - - - - - - - - - -

This wire comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver

By using splitters you can also connect different strands to the same driver.

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

This wire can be cut into smaller lengths and attached to another driver.

Our drivers can run many strips of wire as long as the total length of the wire is under the driver's maximum capacity (in this case under 5m).

With some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed.

Joining tape and heat-shrink tubing are also available if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver.

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.

You will also definitely need some wire-strippers.

You can happily use the joining tape and heat shrink tubing supplied for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle.

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.

We're sure you will be amazed - feel free to message us with any questions.

We have some crazy glowing masks and glasses that go well with this kit - take a look!

Glow EL Wire Alien Halloween Set

Make your own eerie glowing Alien Face mask using this set supplied:

1 metre of high brightness 3.2mm EL wire to outline the Aliens face

1 metre of 1.5mm Maxi EL Wire to make the shape of the eyes

Portable 2 x AA inverter with continuous or strobe setting

3 way splitter - you only need 2, but you will have an option to add more wire to your mask at a later date

Wire twist ties to help attach the wire to your mask

Advice on making the mask:

Making an EL Glowing Alien Mask

Aliens don't have to be green - choose from a selection of colours

Light Blue (Tron Blue), Deep Blue, Pink, Red, Orange, Yellow, Lime Green and White

Because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the Red and Purple as they have to be filtered the most to get the colours right.

This wire comes with a standard connector so simply plugs into any EL inverter - this makes it easy to change between coloured wire on one driver.

By using splitters you can also connect different strands to the same driver.

- - - - - - - - - - - - - - - - - - - - - - - -

EL wire has loads of uses and comes in different thickness and even in thin strips and panels.

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes, hair and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours.

We're sure you will be amazed - feel free to message us with any questions.

Mini EL Wire Set = 5 x 10cm EL Wire + Mini Driver

This EL Set is perfect to add to hats or even just loose in hair.

It can also make an amazing hanging flower decoration - anyway we can't guess what you crazy people are gonna use it for, all we really need to tell you is that this set includes:

1) A Mini 1 x AAA Driver (battery not supplied), for up to 1 metre of EL Wire (4.8cm x 2.5cm x 1.4cm)

This has a switch on the side that allows you to choose between

Flashing - Continuous On - Off

2) 5 Pieces of 10cm EL Wire in your choice of colours (these wires have a 5cm connector wire on them)

3) a Mini 5 Way Splitter (this is 10cm long in total)

The EL Wire is available in these colours: (send us a message with your choice)

Light Blue (Tron Blue), Lime Green, Pink, Red, Orange, Purple, yellow, Deep Blue, Turquoise-Green and White

EL Panel Illuminated Backlight for Spektrum DX6i and DX7 Controllers (may fit other models)

Ladies and/or Gentlemen may we present an Electroluminescent Panel and Driver/Inverter for the Spektrum controllers DX6i and DX7.

For the DX7 you will need to trim a little off the bottom of this Panel, (use sharp scissors and not a scalpel blade), and ensure that you reseal any 'cut' edges with glue before installing.

For the DX6i you will need to cut a little off the end of the Panel.

(For other models you will need to measure the screen size to see if it will fit)

The Panel size is 85mm x 55mm with a lit area of 80mm x 50mm.

The Driver should be powered straight from the device you are backlighting.

We have a choice of tiny waterproof 4.5v, 6v, 9v or 12v Drivers that are designed to be as small as possible so as not to take up too much space (29mm x 19mm x 24mm (L x W x H))

If you need help, please contact us with your requirements, and we'll work out what would be best for you.

Installing an EL Panel as a Backlight is a fairly easy procedure that basically involves accessing the screen of your device, cutting the EL Panel to the desired size, then wiring the Driver so it is powered by the device, then finally putting it all back together.

There are plenty of walk-through videos on YouTube showing step by steps on how to install an EL Backlight.

The following colours are currently available:

Deep Blue, Red, Light Blue, White, Pink, Orange and Green

EL Tape is an incredibly versatile material ithat can be bent and wrapped around things.

It can even have holes and shapes punched into it and be cut to your chosen shape.

(Please be careful not to cut too much of the outer electrode off)

We have EL Panels and EL Tapes in all sorts of sizes and colours; including animated and sound activated moving Panels.

15 metres of 2.3mm EL Wire + Driver

This listing is for 15 metres of standard (2.3mm) electroluminescent glow wire with the option of a driver

The wire is available in any of these colours:

Light Blue (Tron Blue), Purple, Grass Green, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the Red, Purple and Grass Green as they have to be filtered the most to get the colours right.

You have a choice of drivers for this 15m length of wire:

No Driver = Perhaps you have your own driver, or you will be putting many of them together or cutting this one down so will need a different driver to those offered here = £35

8xAA Driver = The classic reliable workhorse of the EL Driver world. This has a switch with positions for

OFF - Flash - ON

Fresh quality batteries can easily be expected to run this EL Wire for over 7-8 hrs before it starts to fade = £42

Mains Driver = The same Driver as above but with a mains adapter instead of an 8xAA Battery Box to power it = £43

Mains + Portable Driver = The Driver has a choice of inputs - the 8xAA Battery Box or a Mains input = £45

Rechargeable Driver = The same driver but with a 3000mAh Li-Ion rechargeable battery. The Rechargeable Battery also comes with an Intelligent Li-ion Charger = £60

The wire has a connector on it so is ready to plug into an EL Driver

We also have EL Wire with connectors attached, in 10cm, 50cm, 1m, 3m, 5m, 10m, 15m, 25m and 100m lengths.

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH OF EL WIRE LISTED

This wire comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver

by using splitters you can also connect different strands to the same driver

EL wire has loads of uses - it looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and office and can even be threaded into clothes and hats.

This neon wire can be cut into smaller lengths and attached to another driver

Our drivers can run many strips of wire as long as the total length of the wire is under the driver's maximum capacity

It is easier to buy it from us with the connectors attached but if you need to, then with some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed

Joining tape and tubing for attaching EL Wire is available from our website - this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.

It is also recommended placing this joint away from where it is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostled - try to keep this joint out for harms way - e.g. avoid putting it at the elbows)

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions you may have.