LED emitters (3mm) with a choice of 6 vivid colours and power supply

These high quality LED emitters are super bright and even noticeably glow in daylight. They can be powered with a variety of our 12V power sources - just plug the power source in and let your creativity loose.

This LED emitter is compatible with 3mm diameter LED fibre optic lighting cable.

This very versatile light source is available in 6 vivid colours: Light Blue, Pink, Red, Orange, Green and White

You can join them together using our 12V LED power supply splitters.

3 way splitter for 12V LED power supply

LED's would usually need a controller, these have one already built in.

We have multiple power source options available:

1) Crocodile Clips

Perfect if you already have your own 12V battery to run these LED emitters.

2) 8 x AA Battery Box

This 8 x AA Battery Box will plug straight into the emitter. It is fairly large (127mm x 72mm x 19mm) but will make these LED emitters portable.

3) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into these LED emitters. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make the emitter portable.

4) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

5) Mains Powered

This handy PSU can be used to power these LED emitters off of Mains Electricity (UK, US or EU plugs are available)

6) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

EL Tape DOUBLE ENDED 2cm x 1 metre Cut to Make 2 Glowing Strips of Any Length

This is a versatile piece of 2cm wide and 1 metre long Electro-Luminescent Tape.

The EL Tape has wires with connectors attached to BOTH ENDS:

This means it can be cut into two pieces of any length you choose

A 2-way splitter is also provided so you can run both the EL Tapes off of one Driver/Inverter

When cutting EL Tape or Panel it is best to use sharp scissors or craft knife and to seal the cut afterwards with glue and/or clear tape

This EL tape is currently available in these colours:

Light Blue (Tron Blue), Deep Blue, Red, Pink, Deep Pink, Orange, Green, Yellow and White

In the drop down menu below is also the option to buy the EL Tape with a powerful portable driver (8 x AA batteries)

This driver/inverter is powerful enough to drive just over 2 metres of this EL Tape in total and will make the Tape plug and play

(If it is more convenient to have a car-lighter attachment instead of the 8 x AA battery box to power this driver please let us know)

In this store there is a whole selection of drivers available that could power this EL Tape such as Sequencer or Sound Activated Drivers