LED emitters (3mm) with a choice of 6 vivid colours and power supply
These high quality LED emitters are super bright and even noticeably glow in daylight. They can be powered with a variety of our 12V power sources - just plug the power source in and let your creativity loose.
This LED emitter is compatible with 3mm diameter LED fibre optic lighting cable.
This very versatile light source is available in 6 vivid colours: Light Blue, Pink, Red, Orange, Green and White
You can join them together using our 12V LED power supply splitters.
3 way splitter for 12V LED power supply
LED's would usually need a controller, these have one already built in.
We have multiple power source options available:
1) Crocodile Clips
Perfect if you already have your own 12V battery to run these LED emitters.
2) 8 x AA Battery Box
This 8 x AA Battery Box will plug straight into the emitter. It is fairly large (127mm x 72mm x 19mm) but will make these LED emitters portable.
3) 3 x 18650 Rechargeable Battery Box
This 3 x 18650 Rechargeable Battery Box will plug straight into these LED emitters. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make the emitter portable.
4) Rechargeable Li-ion Battery
Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes
1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)
1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)
3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)
5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)
All of these Li-ion Batteries come with an intelligent recharger
5) Mains Powered
This handy PSU can be used to power these LED emitters off of Mains Electricity (UK, US or EU plugs are available)
6) Car Lighter Adaptor
This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories
EL Arrows 4cm wide by 8cm
Here we have EL Arrows inside a laminate that is 4cm wide and 8cm long with wires and connector already attached (needs an EL Driver)
These EL Arrows are available in white and light blue.
Ideal for fancy dress costumes or safety signage
-
EL Tape is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration and can be bent and wrapped around things.
-
It can even have holes and shapes punched into it and be cut to your chosen shape
We have EL Panels and EL Tape in all sorts of shapes and sizes
including animated and sound activated moving panels
All our El Wire and Tape comes with wires and connectors attached
ALL EL WIRE AND EL TAPE NEED A DRIVER/INVERTER TO MAKE THEM GLOW - Available from our online store.
STIFF EL Wire 2.3mm @ £5 per metre
Stiff EL Wire lives up to its name as a mould-able, bendable wire suitable for making signs or shapes.
At 2.3mm in diameter, you will find while making patterns with this Stiff EL Wire, it will hold itself rigid when bent into its desired shape and is robust with a strong connector
The bend radius of Stiff EL Wire is 5mm which is the same as our standard EL Wire as is the breaking strain at 1kg
Pressure on the Stiff EL Wire should not be more than 1kg, this means it cannot be pinched too hard or trodden on
This Stiff EL Wire is unlike the standard EL Wire. The 1.0mm, MAXI and ULTRA also share this property, but because of a reinforced copper core, the Stiff EL Wire definitely holds its shape best.
Stiff EL Wire uses exactly the same splitters, drivers and sequencers as standard EL Wire
This remarkable bendy wire is £5 per metre and is available in 50cm, 1metre, 3metre, 5metre, 10metre and 25metre lengths (with connectors attached)
It is currently available in these colours: Deep Blue, Aqua, Red, White, Lime Green and Gold
Bend it into any shape
As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from in our store
FEEL FREE TO CONTACT US, IF YOUR REQUIRED LENGTH ISN'T LISTED.
EL Tape 5cm x 35cm single connector
This is a 5 cm wide and 35cm long strip of glowing Electroluminescent Tape.
It is ideal for using as an arm band for Detroit: Become Human cosplay
If needed, this EL Panel can be cut down to size using sharp scissors.
When cutting EL Tape or Panel it is best to use sharp scissors or craft knife and to seal the cut afterwards with glue and/or clear tape.
This EL Panel is available in Light Blue (Tron Blue) and White.
In the drop down menu, you'll have the option to buy the EL Tape with a powerful mains powered or portable Driver (8xAA batteries)
These Drivers are powerful enough to drive two of these EL Tapes in total and will make the Tape plug and play
There is a whole selection of drivers available at El Wire Craft that could power this EL Tape such as Sequencer or Sound Activated Drivers.
EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it.
Hello and welcome - this is an 'invite only' listing for the Nike EL Panels
we have made some improvements to these Panels:
the Nike EL Panels are sold in pairs
they are slightly slimmer and now have a 'left' and a 'right' side where the connector comes in
making it easier to fit
the colour of the Nike panel now also exactly matches the cresent parts
(also paired as left and right)
if you order the Nike and crescent with the drivers
we will include a mini splitter
so both can be run off the same driver
the drivers can be bought separately here:
Portable Mini Driver for 1 metre EL Wire or 50sq cm EL Tapes/Panels
Complete the festival look with these new EL Wire Shutter Glasses.
These glowing shades come with black or white frames and are without lenses making them great for parties and festivals, day or night
Of course, they need an EL Driver to make them glow - The EL Glasses have a metre long power cable on them that ends in a standard EL Connector.
NO DRIVER - choose this if you already have an EL Driver you can use to attach to the EL Glasses.
Basic Driver - This is our Basic 2xAA Driver that has button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver - This is a very small and discreet Driver that takes a single AAA battery.
As the EL Glasses have a standard connector already attached, you can use one of our Splitters to light up more wire or some EL Tape or EL Shapes from the same Driver. If it helps you plan, there is just over 50cm of EL Wire in these glasses.
They are currently available in any of these colours: Light Blue, Lime Green, Red and Pink
Complete the Space Age look with these new EL Sunglasses
These EL Glasses not only have a classy sleek design - but with EL Wire embedded in them, the whole of the sunglasses light up in an unbroken line of light
The glasses themselves have only a very slight tint to the lens so you can easily wear them indoors - OH YEAH!!!!
(else you can pop the lens out fairly easily)
Of course, they need an EL Driver to make them glow - The EL Glasses have a metre long power cable on them that ends in a standard EL Connector
NO DRIVER - choose this if you already have an EL Driver you can use to attach to the EL Glasses
Basic Driver - This is our Basic 2 x AA Driver that has button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver - This is a very small and discreet Driver that takes a single AAA battery
Of course as the EL Glasses have a standard connector you can use one of our splitters to also run more wire or some EL Tape or EL Shapes off the same driver. If it helps you plan, there is just over 50cm of EL Wire in these glasses.
They are currently available in any of these colours:
Aqua (Tron Blue), Lime Green, Yellow, Orange, Red, Deep Blue, Gold, Pink and White