Sewable EL Wire - Easy Sew Tag @ £3.50 per metre

This handy item is a 2.3mm EL wire with sewable tag running along it; it is available in lengths of 50cm, 1m, 3m, 5m and 10 metre.

(EL wire needs a Driver to make it glow - available from £4 in the Inverter/Driver section of the website).

closeup of sewable el wire

-

sebale el wire in a spiral

EL Wire twisted into a spiral

The wire is available in any of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green (being discontinued), Grass Green and White

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector already attached and ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

By using splitters you can also connect different strands to the same Driver.

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars and motorbikes and can be used inside and outside of your home and office and can even be threaded into clothes and hats.

Our Drivers can run many lengths of EL wire as long as the total length of the wire is under the Driver's maximum capacity

Cutting the wire into the length you choose is simple

el wire and el tape

 

1.3mm Fine 'Angel Hair' EL Wire @ £4 per Metre

This 'Angel Hair' EL Wire is a very light diameter of EL Wire, making it a fun and useful material to work with if you're attaching to light fabric.

el wire twisted into ringlets

EL Wire twisted into ringlets

el wire in zig zag shapes

EL Wire twisted into a zig-zag pattern

The colours we stock in this diameter are:
Light Blue (Tron Blue), Deep Blue, Pink, Orangey-Red, Yellow, Lime Green, Turquoise-Green
and WhiteWhite

And in these lengths:  10cm / 50cm / 1 metre / 3 metre / 5 metre / 10 metre / 15 metre / 30 metre

This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same Driver.

By using Splitters you can also connect many strands of the glowing wire to the same Driver.

el wire and el tape

EL wire has loads of uses!

This neon wire looks amazing when decorating the interior or exterior of cars, it can be used inside and outside of the home and office and can even be threaded into clothes and hats.

Our Drivers can run many lengths of wire as long as the total length of the wire is under the Drivers maximum capacity

With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed.

Joining tape and tubing for re-attaching the wire are available from this store

- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different Driver

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.

You will definitely need some wire strippers

You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle

There are How-tos and a forum on the site to get some great tips

MAXI EL Wire - 1.5mm High Brightness @ £5 per metre

MAXI EL Wire lives up to its name by bringing together the latest breakthroughs in electroluminescent technology to create a high brightness glowing wire that outshines standard EL Wire.

At 1.5mm in diameter, you will find that whilst making patterns with the MAXI EL Wire, it will hold itself rigid when bent into its desired shape. 1.0mm fine EL Wire also does this, but MAXI EL Wire creates a much more rigid form.

The Maxi EL Wire is more robust than the Ultra EL Wire and is as reliable as the standard EL Wire.

The bend radius of MAXI EL Wire is 5mm; the same as our standard EL Wire.

Breaking strain is at 1kg also the same as our standard EL Wire.

Pressure on the MAXI EL Wire should not be more than 1kg; the same as our standard EL Wire.

These spectacular improvements are due to a thicker copper core giving a greater area of luminosity and helps the EL Wire hold its shape.

MAXI EL Wire uses exactly the same Splitters, Drivers and Sequencers as standard EL Wire.

This remarkable glowing wire is £5 per metre and is available in 50cm, 1 metre, 3 metre, 5 metre, 10 metre and 25 metre lengths (with connectors attached).

It is available in Light Blue, Lime Green, Orange, Yellow, Deep Blue Deep Pink, Pink and White

MAXI EL Wire comparison

Comparing Standard, MAXI and ULTRA EL Wire

As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.

The EL Wire has a connector already attached so is ready to simply clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

A wide selection of other EL Tapes, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our store.

el wire and el tape

2.3mm diameter EL Wire @ £2.50 per metre

The 2.3mm diameter Electroluminescent wire is our cheapest standard EL Wire,

it is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green, Turquoise-Green and White

300 metre lengths are only available in Lime, Light Blue, Deep Blue, Red and WhiteWhite

2.3mm diameter EL Wire is available in the following lengths:

1 metre, 3 metre, 5 metre, 15 metre, 10 metre, 100 metre and 300 metre

(The 3.2mm diameter wire is also available in 10 metre and 25 metre lengths)

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White.

The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector on it so is ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our store

We take custom orders for custom lengths of EL Wire.

el wire and el tape

This wire comes with a standard connector already attached so simply plugs into any EL Driver.

By using 'Splitters' you can also connect different strands to just one Driver

EL wire has loads of uses!

It has an amazing neon string effect when decorating the interior or exterior of cars and motorbikes and can be used inside and outside of the home and office and can even be threaded into clothes and hats

3.2mm EL Wire @ £3 per metre

The 3.2mm EL Wire is favoured by makers as it is robust and its thickness offers protection while still having a bright neon effect. When placed on a costume or other project it keeps straight lines without showing kinks

It is available in any of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Grass Green, Turquoise-Green and White

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED

el wire and el tape

- - - - - - - - - - - -

This wire comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver

By using splitters you can also connect different strands to the same driver

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

This wire can be cut into smaller lengths and attached to another inverter

Our inverters can run many strips of wire as long as the total length of the wire is under the inverters maximum capacity

With some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed

Joining tape and tubing for attaching EL Wire is available from this store
this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.

You will also definitely need some wire strippers.

You can happily use the joining tape and heat shrink tubing supplied for a decent join but if the joint is likely to encounter stress (e.g if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g behind a panel in a car) then we would advise soldering to avoid future hassle

It is a cliché to say you are only limited by your imagination but with this neon string it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to email or ring us with any questions

Basic EL Wire Set = 3 x 1 metre EL Wire + Driver

3 x 1 Metre of EL Wire, Splitter and Portable Driver for up to 5 metres of EL Wire.

This listing is for:

1) 3 x 1 metre of high quality (3.2mm) Electroluminescent Wire
2) 2 x AA portable Driver (with Flash)
3) Standard 3 way Splitter

The splitter lets you have 3 x 1 metre lengths of EL Wire attached to one driver/inverter - This gives you greater control and flexibility in the design of your costume.

4) 30 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

hoops for attaching el wire to clothing

 

The EL Wire can be any combination of these colours:

Light Blue, Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White

The 3.2mm diameter EL Wire is one of our brightest!

To make it easier to design your outfit, below are the dimensions of the inverters and lengths of connecting wires - there are also tips on how to create your costume.

POWER PACK / INVERTER (Driver)

The Power Pack takes 2 x AA batteries and has a built-in voltage inverter that 'inverts' the 3Volts from the batteries up to the 100Volts needed to make the EL Wire glow.

The power pack/inverter dimensions are: 9cm x 3.2cm x 2cm

It has the following controls: On / Flash / Strobe / Off

It has an 8cm wire coming out of it that leads to the...

SPLITTER: The Splitter is 40cm long in total; it is 20cm of wire which then splits into 3 separate strands which are all 20cm long and lead to the...

EL WIRE

There is then another 20-25cm from the connector until the actual glowing start of EL Wire - then there are 3 x 1 metre lengths of gorgeous glowing wire!

Its not complicated or fiddly

This set can turn some clothing into a Tron fancy dress in many ways:

1 metre goes down each arm and

1 metre for the front of the costume

OR

1 metre can go across the back and part way down the arm

1 metre to make a helmet

1 metre for the front of the costume

The whole kit is ready to use - just plug and play!

We have some crazy glowing masks & glasses that go well with this kit - take a look!

el wire and el tape

CHASING EL Wire 1.3mm - HALF PRICE (£ 2.50 p/m)

We are now making our standard Chasing EL Wire to be 2.3mm in diameter

So, lucky for you, we are getting rid of our old stock of 3.2mm and 1.3mm Chasing EL Wire and it is now HALF PRICE - at just £2.50 p/m  (until stocks last)

This listing is for 1.3mm fine Electroluminescent glow wire with a chasing motion.

This Chasing 'Angel Hair' EL Wire is very bright and the chasing motion looks amazing

It flows in one continuous motion (it jumps a bit in this picture but that is just the video)

chasing el wire

EL Chasing Wire

-

chasing el wire

EL Chasing Wire

It is available in any of these colours:

Light Blue (Tron Blue), Lime Green, Deep Blue, White, Gold, Pink, Green, Red, Purple and Turquoise Green

The wire has a special connector on it so does not clip into standard EL Wire connectors and needs a Chasing EL Wire Driver (see drop down menu above)

This Chasing Wire is available in 1metre, 3metre and 5metre lengths as well as the thicker 3.2mm Chasing Wire

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available in our online store

EL wire has loads of uses!

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and office and can even be threaded into clothes and hats.

It is a cliché to say you are only limited by your imagination but with EL wire it is true!

If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours.

We're sure you will be amazed - feel free to message us with any questions you may have.

5mm THICK EL Wire @ £4 per metre

The 5mm EL Wire is the least brightest of different diameters of EL Wire, but is ideal for outdoor applications - Sunlight is not good for EL Wire and the thick coating on this wire protects it more.

Some people also prefer this thicker wire for its 'chunky neon cable' look but will not bend into the rightangles required for some letters of the alphabet.when you're making a faux neon sign.

The colours we have at present are:

Light  Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green, Turquoise-Green and White

This 5mm thick EL wire is available in the following lengths: 10cm, 1 metre, 3 metre, 5 metre, 10 metre

This wire comes with a standard connector already attached so that it simply plugs into any EL Driver.

By using 'Splitters' you can also connect different strands to the same Driver.

EL wire has loads of uses!

It has an amazing neon string effect when decorating the interior or exterior of cars, can be used inside and outside of your home and office and can even be threaded into clothes and hats.

This wire comes as 'plug and play' but if you want to get more technical you can be cut into smaller lengths

Our EL inverters can run many lengths of wire as long as the total length of the wire is under the Driver/Inverters maximum capacity

With some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed

Joining tape and tubing for re-attaching the wire are available from this store

- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention so you will definitely need some wire strippers.

You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostled) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle

There are How-tos and a forum on the site to get some great tips

el wire and el tape

STIFF EL Wire 2.3mm @ £5 per metre

Stiff EL Wire lives up to its name as a mould-able, bendable wire suitable for making signs or shapes.

At 2.3mm in diameter, you will find while making patterns with this Stiff EL Wire, it will hold itself rigid when bent into its desired shape and is robust with a strong connector

The bend radius of Stiff EL Wire is 5mm which is the same as our standard EL Wire as is the breaking strain at 1kg
Pressure on the Stiff EL Wire should not be more than 1kg, this means it cannot be pinched too hard or trodden on

This Stiff EL Wire is unlike the standard EL Wire. The 1.0mm, MAXI and ULTRA also share this property, but because of a reinforced copper core, the Stiff EL Wire definitely holds its shape best.

Stiff EL Wire uses exactly the same splitters, drivers and sequencers as standard EL Wire

This remarkable bendy wire is £5 per metre and is available in 50cm, 1metre, 3metre, 5metre, 10metre and 25metre lengths (with connectors attached)

It is currently available in these colours: Deep Blue, Aqua, Red, White, Lime Green and Gold

Stiff EL Wire demonstration of bendy mould-able abilities

Bend it into any shape

As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from in our store

FEEL FREE TO CONTACT US, IF YOUR REQUIRED LENGTH ISN'T LISTED.

el wire and el tape

EL Wire Hoodie Set

In this set is everything you need to turn your own normal hoodie into a glowing EL Wire hoodie

With this set you will get:

1) 1.5 metres of 3.2mm EL Wire to outline the hoodie

2) Trigger Driver so you can switch from 'glow mode' to 'incognito' using a switch in your sleeve

3) 30 x Clear Hoops to make it easy to attach the EL Wire to the hoodie and also make it removable so you can put it through the washing machine

hoops for attaching el wire to clothing

 

The EL Wire outline is in a selection of colours:
Light Blue (Tron Blue), Deep Blue, Pink, Purple, Orange, Red, Yellow, Lime Green, Grass Green and White

We have some crazy glowing masks and glasses that go well with this kit - take a look!

 

el wire and el tape

Simple Sign Making Kit

EL Wire is a perfect material for making glowing neon effect signs

We have made this even better by developing an EL wire that contains a thin metal rod that helps it hold its shape

So making your own sign has never been easier

With this set you will get:

1) 3 metres of specialist  Stiff EL Wire to easily shape into your own design

glowing stiff el wire for signwriting

2) EL Driver with plunger switch to power the wire and give you an accessible on/off switch

 

3) 3 x fixing ties to help hold your sign in place

4) 30cm of heat shrink which you can use to black out any non-lit portion of your sign

heatshrink plastic tubing to blackout el wire sign

5) Instructions with tips to help you make your sign

 

The whole of the set is plug and play, but you will need your own backing material or wall to attach your sign too

 

el wire and el tape

ULTRA EL Wire - High Intensity @ £6 per metre

ULTRA EL Wire lives up to its name by bringing together the latest breakthroughs in electroluminescent technology to create an intensely bright glowing wire that outshines all other types of EL Wire (including Double Core)

At a sturdy 2.6mm in diameter, you will find while making patterns with this ULTRA EL Wire, it will hold itself rigid when bent into its desired shape, (1.0mm EL Wire also does this, but ULTRA EL Wire creates a much more robust form)

Please note ULTRA EL Wire has to be handled more carefully than standard EL Wire, there are three things to be aware of:

1. The bend radius of Ultra EL Wire is 1.2cm which is much less than standard EL Wire which is 5mm.
2. The breaking strain is 500g, compared to 1kg for standard EL Wire.
3. Pressure on the Ultra EL Wire should not be more than 500g, this means it cannot be pinched too hard or trodden on

These spectacular improvements are due to bringing together these latest breakthroughs in electroluminescent technology:

1. A thicker copper core gives a greater area of luminosity and helps the EL Wire hold its shape
2. Premium Grade 'next generation' Phosphors are used to coat the core to give the most intense bright neon effect possible

3. Thicker internal corona wires - that's right! Thicker corona wires spiral around the core, this provides maximum exposure of the current applied to the Wire

ULTRA EL Wire comparison

Comparing 1metre of 2.3mm, 3.2mm and ULTRA EL Wire

ULTRA EL Wire uses exactly the same splitters, drivers and sequencers as standard EL Wire.

It will draw twice as much current to feed its increased brightness

So please remember to treat ULTRA EL Wire like the Double Core EL Wire and halve the EL Driver rating when using ULTRA EL Wire

e.g. if the EL Driver is rated for 5-10m Standard EL Wire then that EL Driver can power 2.5m-5m of ULTRA EL Wire

or

if the EL Driver is for 10-30 metres standard EL Wire, then it should power 5-15m ULTRA EL Wire

This remarkable glowing wire is £6 per metre and is also available in these lengths (with connectors attached):

50cm, 1 metre, 3 metre, 5 metre and 10 metre

we currently have it available in these colours: Aqua, Lime Green, Orangy-Red, Pink, GoldDeep Blue and White

ULTRA EL Wire comparison

Comparing 2.3mm, 3.2mm and ULTRA EL Wire

As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

A wide selection of EL Tapes, EL Panels, EL Wire, Sequencers, Drivers and helpful EL accessories are available from in our store

el wire and el tape

Basic Dance Act EL Wire Set

Take Street Dance to a whole new level with this Glowing EL Wire Set

This set is for a 'plug and play' EL Wire and Driver - but you have to attach it to your own costume

With the set you get:

1) 5 pieces of 1 metre EL Wire in a choice of colours

2) A Trigger Driver that has a 1m long power wire that is able to run down the sleeve, allowing the performer to turn the lights on and off at will

This Driver takes 2 x AA batteries (not supplied) and is powerful enough for 5m of Standard EL Wire (2.5m of Ultra EL Wire)

EL Driver with long plunger trigger control

EL Driver with long plunger trigger control

Trigger Driver for EL Wire

3) A long 2-way splitter and a standard 2-way and 3-way splitter

By 'daisy chaining' the splitters you can have all the lengths of EL Wire attached to this one driver

4) 30 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

hoops for attaching el wire to clothing

 

The EL Wire can be any combination of these colours:
Light Blue (Tron Blue), Purple, Grass Green, Deep Blue, Pink, Red, Orange, Yellow, Lime Green,  and White

robo dance act supplied by EL Wire Craft

EL Wire Dance Act

The whole kit is ready to use - just plug and play!
We have some crazy glowing masks & glasses that go well with this kit - take a look!

el wire and el tape

Dance Act EL Wire Set = 12 metres of EL Wire + Trigger Driver

Take Street Dance to a whole new level with this Glowing EL Wire Set with a hand controller to switch the lights On and Off

This set is for a 'plug and play' EL Wire and Driver - but you have to attach it to your own costume

With the set you get:

1) 2 pieces of 3 metres EL Wire

2) 6 pieces of 1 metre EL Wire

3) A 'Dance Act' Driver that has a 1.2m long power cord that runs down the arm allowing the performer to turn the lights on and off at will

This driver is powerful enough to make up to 15 metres of EL Wire glow.

4) plus several splitters (3 x 2-way, 2 x 4-way, a spare 5-way and 2 x extenders)

By 'daisy chaining' the splitters you can have all the lengths of EL Wire attached to this one driver

5) 50 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

hoops for attaching el wire to clothing

 

The EL Wire can be any combination of these colours:

Light  Blue (Tron Blue), Purple, Deep Blue, Grass Green, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White

The whole kit is ready to use - just plug and play!

Dance Act with EL Wires from EL Wire Craft

Our EL Wires in Action

Dimensions of the products:

If you are making a costume, it is important to plan it out properly.

For this Dance Act set, the driver is very powerful and so it comes with a separate power pack that takes 8 x AA batteries or a powerful rechargeable (3000mAh) Lithium-Ion Battery and battery charger (please choose the plug type you need)

So here are the dimensions of all the parts plus lengths of wire between them.

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 6.5cm x 6cm x 3cm

The Rechargeable Li-ion battery is smaller and lighter:

172g (7.3cm x 5.6cm x 2.2cm)

it has a 65cm thin power wire coming out of it that leads to the...

DRIVER

The driver is 6cm x 4cm x 4cm

It has a 1.2m long power lead coming out that ends with an ON/OFF plunger giving you the ability to control the light

It has a 55cm wire coming out of it that leads to a...

SPLITTER

The Splitters are 40cm long in total,

it is 20cm of wire which then splits into the separate strands which are all 20cm long

GLOWING EL WIRE
2 x 3 metres is for the body

6 x 1 metres is for the legs, arms and head

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set

robo dance act supplied by EL Wire Craft

EL Wire Dance Act

The whole kit is ready to use - just plug and play!
We have some crazy glowing masks & glasses that go well with this kit - take a look!

el wire and el tape

CHASING 2.3mm EL Wire - Motion Effect @ £5 per metre

This listing is for 2.3mm Electroluminescent glow wire with a chasing motion.

The chasing motion looks amazing - it flows in one continuous motion (it jumps a bit in this picture but that is just the video)

chasing el wire

EL Chasing Wire

chasing el wire

EL Chasing Wire

It is available in any of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Gold, Lime Green and Green

The wire has a special connector on it so does not clip into standard EL Wire connectors or drivers. It needs a Chasing EL Wire Driver (available in the drop-down menu above)

We are now stocking 'Splitters' for chasing El Wire if you would like 2 or 3 separate lengths from the same Driver

A wide selection of other EL Tapes, EL Wire, Sequencers, Drivers and helpful EL accessories are available in our online store

el wire and el tape

EL wire has loads of uses!

It looks amazing when decorating the interior or exterior of cars and motorbikes and it can be used inside and outside of the home and office and can even be threaded into clothes and hats.

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.

We're sure you will be amazed - feel free to message us with any questions you may have and for any advice you may need for your EL projects.

Ultra CHASING EL Wire @ £12 per metre

This listing is for Ultra CHASING Electroluminescent glow wire with a chasing motion.

The Ultra Chasing EL Wire is made from 3 strands of Ultra EL Wire and so is brighter than standard Chasing EL Wire

comparing Standard and Ultra chasing el wire

Standard Chasing EL Wire + ULTRA Chasing EL Wire

It is available in any of these colours:

Light Blue (Tron Blue), Lime Green, Pink, Orange, Deep Blue and Red

Ultra chasing el wire

ULTRA Chasing EL Wire

The wire has a special connector on it so does not clip into standard EL Wire connectors and needs a Chasing EL Wire Driver. Visit our Chasing Wire accessories to find drivers and connectors to suit your project

This Chasing Wire is available in 33cm, 1m, 3m and 5m lengths

el wire and el tape

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions

0
    0
    Your Cart
    Your cart is emptyReturn to Shop