Cyber Punk 2077 glowing Samurai patch + driver + power pack
Cyber Punk 2077 glowing samurai
allows you to immerse yourself in the future with this amazing glowing patch. Fix it to the back of your clothing or your gaming chair and simply plug and play.
The Cyber Punk 2077 glowing samurai patch measures 26cm x 23cm and simply plugs into your preferred driver.
It is supplied with 39cm of velcro to easily attach and remove from clothing, since the patch is not washable. Simply sew one side of the Velcro to your clothing and stick the other side to the back of the patch.
If you want to fix the patch onto the back of a gaming chair, use some double-sided tape which is freely available on Ebay or your local DIY store.
All electroluminescent panels need a driver to make them glow. **Please note - DO NOT switch on the driver without first attaching a panel to it.** This item has a few options for you to choose from:
1) NO DRIVER
This is a great option if you already have your own driver you want to use.
Whatever your reason, this option gives you just the Samurai patch - without any driver or external power supplies like the rest of these listed below...
2) Basic Trigger Driver is needed to make the Samurai patch glow. It is powered by 2 x AA batteries (not supplied) and has an On/Off plunger switch, on the end of a 1.2m cable, that can run down the arm of the clothing and used to discreetly turn the glowing Samurai patch on and off.
3) Adaptable Trigger Driver with an 8 x AA battery box. These adaptable trigger drivers make the glowing Samurai patch glow the brightest. The driver's dimensions are 5.3cm x 3.4cm x 2.9cm and it weighs 61g. The battery box plugs straight into the driver. It is fairly large (127mm x 72mm x 19mm) and takes 8 x AA alkaline batteries (not supplied).
For portable uses, this allows the unit to be held on the body while the switch runs down the sleeve to the hand. The switch will latch on when fully pressed down, press for a second time and the switch will latch off.
4) Adaptable Trigger Driver with a 1000mAh Li-ion rechargeable battery pack and intelligent charger. These adaptable trigger drivers make the glowing Samurai patch glow the brightest. The driver's dimensions are 5.3cm x 3.4cm x 2.9cm and it weighs 61g. The Li-ion battery pack plugs straight into the driver.
Much smaller and lighter than the battery box, these powerful Li-ion batteries come with an intelligent charger. Its dimensions are 6.5cm x 3.7cm x 1.8cm and it weighs 81g.
*If you want more than one of the power connectors mentioned above for your EL Driver, they can all be found in our Accessories section, or just click the links in the descriptions you want and be taken to their own pages.*
Glowing Stag Pattern Party Mask
Complete the masked ball or festival look with these new EL Glowing masquerade Masks
This EL Mask has a beautiful blue stag pattern when off, yet comes to life when plugged into a driver making it great for parties, festival or masked balls, day or night
Of course, it needs an EL Driver to make it glow - The mask has a metre long power cable on it that ends in a standard EL Connector
NO DRIVER - choose this if you already have an EL Driver you can use to attach to the Mask
Basic Driver - This is our Basic 2xAA Driver that has button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver - This is a very small and discreet Driver that takes a single AAA battery
Of course as the EL Mask has a standard connector, you can use one of our splitters to run more wire, EL Tape or EL Shapes off the same driver, adding to look of your costume.
Complete the festival look with these new EL Wire Shutter Glasses.
These glowing shades come with black or white frames and are without lenses making them great for parties and festivals, day or night
Of course, they need an EL Driver to make them glow - The EL Glasses have a metre long power cable on them that ends in a standard EL Connector.
NO DRIVER - choose this if you already have an EL Driver you can use to attach to the EL Glasses.
Basic Driver - This is our Basic 2xAA Driver that has button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver - This is a very small and discreet Driver that takes a single AAA battery.
As the EL Glasses have a standard connector already attached, you can use one of our Splitters to light up more wire or some EL Tape or EL Shapes from the same Driver. If it helps you plan, there is just over 50cm of EL Wire in these glasses.
They are currently available in any of these colours: Light Blue, Lime Green, Red and Pink
Shutter Glasses -Dual Colour
Complete the festival look with these new Dual Colour EL Shutter Glasses.
These flashing shades come with black or white frames and a choice of two EL Wire colours. They are without lenses making them great for parties and festivals, day or night.
Of course, they need an EL Driver to make them glow - The EL Glasses have a metre long power cable that ends in a standard EL Connector.
NO DRIVER - choose this if you already have an EL Driver you can use to attach to the EL Glasses.
Basic Driver - This is our Basic 2xAA Driver that has a button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver - This is a very small and discreet Driver that takes a single AAA battery.
Of course as the EL Glasses have a standard connector you can use one of our splitters to also run more wire or some EL Tape or EL Shapes off the same driver. If it helps you plan, there is just over 50cm of EL Wire in these glasses.
They are currently available in any of these colours: Light Blue, Lime Green, Red and Pink
EL Glowing Ties - with Choice of Drivers
Here we have some amazing looking glowing ties
The ties are in 5 colours:
White, Black, Gold, Red, Deep Blue
The EL Wire outline is in a selection of colours and you can choose different colour wire to the colour of the tie:
Light Blue (Tron Blue), Deep Blue, Red, Yellow, Lime Green, Turquoise-Green and White
glowing EL Tie
Of course, they need an EL Driver to make them glow - The EL Ties have a 50cm long power cable on them that ends in a standard EL Connector
NO DRIVER = £6 - choose this if you already have an EL Driver you can use to attach to the EL Glasses, or if you want to use a different driver or sequencer
Basic Driver = £10 - This is our Basic 2 x AA driver which has a button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver = £12 - This is a very small and discreet Driver that takes a single AAA battery
Of course as the EL Glasses have a standard connector you can use one of our splitters to also run more wire or some EL Tape or EL Shapes off the same driver.
Or use a sequencer to make the EL Tie flash alongside other parts of your costume.
If it helps you plan part of a bigger EL Project, there is just over 60cm of EL Wire on the EL Tie