Mains PSU - UK mains to 12V

This is a plug that goes into the mains power and then converts the mains AC power to 12V DC which is what many of our EL Drivers are powered by.

Since EL Wire is very low power, we only have these power supply units that output a maximum of 1A.

These power supply units are recommended to be used with our adaptable drivers.

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Sewable EL Wire - Easy Sew Tag @ £3.50 per metre

This handy item is a 2.3mm EL wire with sewable tag running along it; it is available in lengths of 50cm, 1m, 3m, 5m and 10 metre.

(EL wire needs a Driver to make it glow - available from £4 in the Inverter/Driver section of the website).

EL Wire twisted into a spiral

The wire is available in any of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green (being discontinued), Grass Green and White

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector already attached and ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

By using splitters you can also connect different strands to the same Driver.

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars and motorbikes and can be used inside and outside of your home and office and can even be threaded into clothes and hats.

Our Drivers can run many lengths of EL wire as long as the total length of the wire is under the Driver's maximum capacity

Cutting the wire into the length you choose is simple

8 x AA Battery Box(1)

This handy item is an enclosed battery box that takes 8 x AA batteries (batteries not supplied) and gives an output of 12v.

*Please note this is just a battery box, IT IS NOT AN EL DRIVER/INVERTER. They are available as a power supply for our EL Drivers or EL Sequencers.*

The size of this power pack is:

127mm x 72mm x 19mm and the lead for the output is 17cm long with a 2.1mm/5.5mm plug on the end.

This is a useful item for when you need to power a 12v appliance that you want to make portable

REMEMBER:

Standard alkaline batteries are 1.5v each, so 8 of them will make 12v, however rechargeable batteries are only1.2v each, so 8 of them in this battery pack will only produce 9.6v.

- - - - - - - - - - - - - - - - - -

These battery packs are used to power powerful driver/inverters for EL wire

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

3 x 18650 Battery Box(1)

This handy item is a battery box that takes 3 x 18650 batteries and gives an output of just under 12V

*Please note this is just a battery box IT IS NOT AN EL DRIVER/INVERTER. . They are available as a power supply for our EL Drivers or EL Sequencers.*

18650 batteries are the long round flat ended rechargeable 'INR' or 'IMR' batteries which have become popular since they are used in vaping rigs.

We have made this battery box to power the 12v EL Drivers and Sequencers,

The 18650 batteries are 3.7v each, so the power input from this Battery Box with 3 is a total of 11.1V

We have found this barely makes a difference when powering EL Drivers compared to the convenience of these rechargeable batteries

This Battery Box comes with a standard 2.1mm/5.5mm connector

The size of the Battery Box power pack is 75mm x 60mm x 20mm and the output lead is 250mm long.

- - - - - - - - - - - - - - - - - -

These battery packs are used to power powerful driver/inverters for EL wire

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Adaptable Driver for 5-15m (Flashing Option)

This handy item is a 12v driver with a variety of power inputs that will run between 5 and 15 meters of EL Wire.

The Driver has a switch on the side with 3 different positions Off - Flash - Continuous On.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of power supplies (Mains, Batteries, Direct 12V etc)

The size of the Driver is: 5cm x 3.2cm x 2.8cm and weighs 61g.

Using splitters, this Driver can run as many strands as you like as long as the total is under 15 metres.

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver.

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once.

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

EL Wire Sample Packs

So you've not used or seen Electroluminescent Wire before and you are curious to see what the colours are like in the different types and thicknesses and what you can do with it.

The beauty of EL Wire is its easy to use and comes ready to plug and play. Our samples packs have a good selection of EL Wire in all its different forms and colours.

Choose from the drop down menu:

1) All Blue - Mix of Types
Choose this option if you want try out our Blue wires, and we will send you a selection of different wires and diameters

In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in Light Blue
2) 1 x 1m length of 2.3mm EL Wire in Light Blue
3) 2 x 50cm lengths of 3.2mm EL Wire in Light Blue and Deep Blue
4) 1 x 1m length of 5mm EL Wire in Light Blue
5) 2 x 50cm length of Sewable EL Wire in Light Blue and Deep Blue
6) 1 x 1m length of Stiff EL Wire in Aqua
7) 2 x 50cm lengths of Maxi EL Wire in Blue and Purple (this has a blue tone to it)
8) 1 x 2 x 12cm length of Light Blue EL Tape
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black.

2) All White - Mix of Types
Choose this option if you want try out our White wires, and we will send you a selection of different wires and diameters.

In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in White
2) 1 x 1m length of 2.3mm EL Wire in White
3) 1 x 1m length of 3.2mm EL Wire in White
4) 1 x 1m length of 5mm EL Wire in White
5) 1 x 1m length of Sewable EL Wire in White
6) 1 x 1m length of Stiff EL Wire in White
7) 1 x 1m length of Maxi EL Wire in White
8) 1 x 2 x 12cm EL Tape in White
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black

3) Mixture of all Colours and Types
Choose this option if you want try out all of our colours, and we will send you a selection of different wires and diameters

In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in White
2) 1 x 1m length of 2.3mm EL Wire in Red
3) 1 x 1m length of 3.2mm EL Wire in Light Blue
4) 1 x 1m length of 5mm EL Wire in Orange
5) 1 x 1m length of Sewable EL Wire in Yellow
6) 1 x 1m length of Stiff EL Wire in Lime
7) 1 x 1m length of Maxi EL Wire in Pink
8) 1 x 2 x 12cm EL Tape in Light Blue
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black

Our wires are available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green and White

Our wires are available in any of these types: 1.0mm, 1.5mm, 2.3mm, 3.2mm, 5mm, Stiff, Ultra and sewable

All of our sample packs come with:

1) 5-15m adaptable driver with (mains plug- relevant to your location) (email us - if you would like a battery option)

2) Splitters to 'drive' all the wires at the same time.

3) 2 x 12cm EL Panel

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White.

The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector attached and so is ready to clip into an EL Driver.

A wide selection of other EL Tape, EL Panels, Sequencers, Drivers and helpful EL accessories are available from our store

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH OF EL WIRE LISTED AS WE TAKE CUSTOM ORDERS - TPLEASE BE AWARE THERE IS A MINIMUM ORDER REQUIREMENT FOR CUSTOM ORDERS.

EL wire has loads of uses

It has an amazing neon string effect when decorating the interior or exterior of the home, cars, motorbikes, bicycles and trailers. It can be used to make faux neon signs and attached to costumes and even be threaded into clothes and hats. It can be used as safety lighting and mood lighting.

1800mAh (Thin) Li-ion Battery

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

While trying out different battery systems we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

We have these batteries in 4 different sizes with the following weights and dimensions:

1800mAh (Square): 125g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

15Ah: 725g (14.0cm x 6.5cm x 4.7cm)

SPECS:

Capacity: 1800mAh, 3000mAh or 5000mAh

Input power: DC 12.6V

Output: DC 12V

Over-charge / discharge protection: Yes

AC Mains Chargers are available with UK plugs.

These Li-ion batteries are best charged with dedicated Li-ion Intelligent Chargers

The 15Ah has an overcharge protection up to 15A so can take a larger current draw

No Li-ion Battery

If you already have a Li-ion battery charger, this option is for you.

Our rechargeable Li-ion batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

While trying out different battery systems, we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

We have these batteries in 4 different sizes:

1800mAh (Thin): 145g (10cm x 5.5cm x 1.1cm)

1800mAh (Square): 125g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

15Ah: 725g (14.0cm x 6.5cm x 4.7cm)

SPECS:

Capacity: 1800mAh, 3000mAh or 5000mAh

Input power: DC 12.6V

Output: DC 12V

Over-charge / discharge protection: Yes

No Li-ion Battery Charger

If you already have a dedicated intelligent Li-ion battery charger, this option is for you.

Our dedicated UK mains intelligent Li-ion battery chargers are available in 1A and 2A versions.

Specifications are:
1A
Input: 100 - 240V AC 0.8A 50/60hz.
Output: 12.6 V DC 1000mA

2A
Input: 100 - 240V AC 1A 50/60Hz
Output: 12.6V DC 2000mA

1800mAh (Square) Li-ion Battery

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

While trying out different battery systems we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

We have these batteries in 4 different sizes with the following weights and dimensions:

1800mAh (Square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

15Ah: 725g (14.0cm x 6.5cm x 4.7cm)

SPECS:

Capacity: 1800mAh, 3000mAh or 5000mAh

Input power: DC 12.6V

Output: DC 12V

Over-charge / discharge protection: Yes

AC Mains Chargers are available with a UK plug.

These Li-ion batteries are best charged with dedicated Li-ion Intelligent Chargers.

3000mAh Li-ion Battery

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

While trying out different battery systems we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

We have these batteries in 4 different sizes with the following weights and dimensions:

1800mAh (Thin): 145g (10cm x 5.5cm x 1.1cm)

1800mAh (Square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

15Ah: 725g (14.0cm x 6.5cm x 4.7cm)

SPECS:

Capacity: 1800mAh, 3000mAh or 5000mAh

Input power: DC 12.6V

Output: DC 12V

Over-charge / discharge protection: Yes

AC Mains Charger: UK Plug

These Li-ion batteries are best charged with dedicated Li-ion Intelligent Chargers.

CHASING Driver for 5 - 15m

This adaptable EL Driver only works for CHASING EL Wire

With this Driver you can adjust the speed of the chasing wire

It is a powerful driver and is suitable for 5m - 15m of standard Chasing EL Wire or 5m ULTRA Chasing EL Wire
It DOES NOT have an On /Off Switch and will switch on as soon as it is connected to a power source.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12V etc)

Its dimensions are: 5cm x 4cm x 4cm (L x W x H) and weighs 80g.

Instructions:

1. Switch On, (to first position), ensuring that you have the EL Wire attached, as not having it attached when switching the Driver on can burn the Driver out.
2. The first position is ON and normal chasing speed.
3. Slide the switch to the last position and the Chasing EL Wire will move between speeding up and slowing down.
4. Watch the speed and when you see the speed that you want the EL Wire to chase at, move the switch back to the first position and it will lock the speed you want to use.

This Driver does have an On/Off Switch

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it also has a range of power inputs that hopefully cover most uses:

1) ONLY THE DRIVER

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

1m extender for 12v

you can use this 1m Extender by connecting the extender between the Power Source and the Driver

The 1m Extender is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

Remote Control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

5000mAh Li-ion Battery

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

While trying out different battery systems we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

We have these batteries in 4 different sizes with the following weights and dimensions:

1800mAh (Thin): 145g (10cm x 5.5cm x 1.1cm)

1800mAh (Square): 125g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

15Ah: 725g (14.0cm x 6.5cm x 4.7cm)

SPECS:

Capacity: 1800mAh, 3000mAh or 5000mAh

Input power: DC 12.6V

Output: DC 12V

Over-charge / discharge protection: Yes

AC Mains Chargers are available with a UK plug

These Li-ion batteries are best charged with dedicated Li-ion Intelligent Chargers.

Water Resistant 12v Driver for 5 - 15 metres of EL Wire or EL Tape.

Here we have a large and powerful EL Driver that is sealed within a waterproof casing - reducing the whistle while also making it water-resistant.

This is a 12v driver (with crocodile clips) which will run between 5 and 15 metres of EL neon glow wire or 150 - 400 square centimetres of EL Tape or EL Panel.

The driver DOES NOT have an on/off switch or a blinking function

But does have two integral screw fixing points on either side of it so it can be fastened down.

It has a water-tight seal all round it including where the wires come in and out of it. Attached in a sensible place it should withstand all types of weather.

Its dimensions are: 4cm x 3cm x 3cm (L x W x H)

The screw fixing tabs stick out 6mm each on the 4cm side and could easily be cut off

The wire from the crocodile clips is just under 1 metre long

Wire from inverter to EL wire connector is 17cm

** REMEMBER - The EL Driver will keep running while it is attached to a power source even if there is EL Wire or EL Tape attached to it or not**

*All the EL wire we supply comes with a connector, so they plug straight into the driver.*

The standard EL wire connector making it able to quickly switch between different coloured wire or add a splitter and have several strands of wire - simply clip it in and out the connector.

This driver can also run many strands and colours of EL wire as long as the total length of wire is between 5 and 15 meters.

Speaker wire can be used to extend the distance between the inverter and the start of the glowing EL wire.

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED

- - - - - - - - - - - -

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Water Resistant Driver for 5 - 15 metres of EL Wire with integral crocodile clips

Here we have a large and powerful EL Driver that is sealed within a waterproof casing - reducing the whistle while also making it water-resistant.

This is a 12v driver (with integral crocodile clips) which will run between 5 and 15 metres of EL neon glow wire or 50 - 300 square centimetres of EL Tape or EL Panel.

The driver DOES NOT have an on/off switch or a flashing function.

It does have two integral screw fixing points on either side of it so it can be fastened down.

It has a water-tight seal all round it including where the wires come in and out of it. Attached in a sensible place it should withstand all types of weather.

Its dimensions are: 4cm x 3.2cm x 3cm (L x W x H)

The screw fixing tabs stick out 7mm each on the 4cm side and could easily be cut off

The wire from the crocodile clips is just under 1/2 metre long

Wire from inverter to EL wire connector is 26cm

** REMEMBER - The EL Driver will keep running while it is attached to a power source even if there is EL Wire or EL Tape attached to it or not**

*All the EL wire we supply comes with a connector, so they plug straight into the driver.*

The standard EL wire connector making it able to quickly switch between different coloured wire or add a splitter and have several strands of wire - simply clip it in and out the connector.

This driver can also run many strands and colours of EL wire as long as the total length of wire is between 5 and 15 meters.

Speaker wire can be used to extend the distance between the inverter and the start of the glowing EL wire.

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED

- - - - - - - - - - - -

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Adaptable Driver for 10 - 40m (Flashing Option)

This adaptable EL Driver will run between 10 and 40 metres of EL Wire or 150 - 600 square cm (A4) of EL Panel or EL Tape.
It has a flashing option.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of power supplies (Mains, Batteries, Direct 12V etc)

Its dimensions are: 8cm x 5cm x 3.2cm (L x W x H)

Weight: 130g

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it also has a range of power inputs that hopefully cover most uses:

1) ONLY THE DRIVER

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent charger as standard.

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.