Standard Splitter for EL Wire, EL Tapes, EL Panels- 2 Way up to 6 Way
These Standard splitters make your glowing costume or EL project exactly how you want.
These Splitters allow you to run up to six separate strands of EL wire from just one Driver/Inverter (or another Splitter).
The Splitter works for EL Wire, EL Tape or EL Panels.
The Splitter is 40cm in total length and the connector wire is 20cm long.
These Splitters are available in: 2 Way / 3 Way / 4 Way / 5 Way/ 6 Way
*ALL the EL Wire, EL Tapes and EL Panels that we supply comes with a 'Connector' already attached so they plug straight into a Driver*

EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats.
It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours
We're sure you will be amazed - feel free to message us with any questions you may have.
Mains PSU - UK mains to 12V
This is a plug that goes into the mains power and then converts the mains AC power to 12V DC which is what many of our EL Drivers are powered by.
Since EL Wire is very low power, we only have these power supply units that output a maximum of 1A.
These power supply units are recommended to be used with our adaptable drivers.
If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours
We're sure you will be amazed - feel free to message us with any questions.
Sewable EL Wire - Easy Sew Tag @ £3.50 per metre
This handy item is a 2.3mm EL wire with sewable tag running along it; it is available in lengths of 50cm, 1m, 3m, 5m and 10 metre.
(EL wire needs a Driver to make it glow - available from £4 in the Inverter/Driver section of the website).

-

EL Wire twisted into a spiral
The wire is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green (being discontinued), Grass Green and White
Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector already attached and ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
By using splitters you can also connect different strands to the same Driver.
EL wire has loads of uses
It looks amazing when decorating the interior or exterior of cars and motorbikes and can be used inside and outside of your home and office and can even be threaded into clothes and hats.
Our Drivers can run many lengths of EL wire as long as the total length of the wire is under the Driver's maximum capacity
Cutting the wire into the length you choose is simple

Contents of the elwirecraft EL Repair Kit:
1) Instruction Booklet
2) 5 x Male EL Connector (that attach to the EL Wire itself)
3) 6-way Splitter
4) Copper Tape
5) Wide and Thin Heatshrink Tubing
6) End Caps
You Will also Need
1) Wire strippers
2) Soldering Iron + Solder
3) Scalpel
4) Heat gun or lighter
5) Helping Hands (if possible)
EL Wire Care
EL Wire is a very robust material - it can withstand fairly extreme temperatures between -20°C and 50°C. It is durable and the wire itself is water resistant. If the wire is likely to get wet or even be in a humid environment then make sure the end of the wire has been made fully waterproof as the connection point is sensitive to moisture.
Even if the material itself is hardy, like any electronics it has to be looked after if you want it to last a long time.
This goes double if the EL Wire is going to be worn and where it will be exposed to various stresses that electrical items are sensitive to.
There are some tips on the back page to get the most out of your EL Wire, but you must also remember that the life of your
EL Wire will be reduced if it is exposed to repeated bending stress, extreme pulling tension or humid conditions.
EL WIRE WITH CONNECTORS ATTACHED
All the EL Wire, EL Tape and EL Panels supplied by elwirecraft already have connectors attached and are ready to plug straight into a driver
(please note we always have stocks of EL Wire with connectors attached in lengths of 10cm, 50cm, 1metre, 3metre, 5metre, 10 metre, 15 metre and 25 metre)
The connectors for EL wire are generally universal - these are connectors that either attach to an EL Driver or will fit into a splitter that comes off of a driver
If you are cutting a piece of EL wire you may also want to put a cap on the end of it so these are supplied too
Cutting EL Wire couldn't be simpler, but re-attaching it is fairly easy but takes a little time and patience and is explained step by step in the instruction booklet
We can supply more copper tape and heat-shrink tubing here

- - - - - - - - - - - - - - - - - -
If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours
We're sure you will be amazed - feel free to message us with any questions
So you've not used or seen Electroluminescent Wire before and you are curious to see what the colours are like in the different types and thicknesses and what you can do with it.
The beauty of EL Wire is its easy to use and comes ready to plug and play. Our samples packs have a good selection of EL Wire in all its different forms and colours.
Choose from the drop down menu:
1) All Blue - Mix of Types
Choose this option if you want try out our Blue wires, and we will send you a selection of different wires and diameters
In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in Light Blue
2) 1 x 1m length of 2.3mm EL Wire in Light Blue
3) 2 x 50cm lengths of 3.2mm EL Wire in Light Blue and Deep Blue
4) 1 x 1m length of 5mm EL Wire in Light Blue
5) 2 x 50cm length of Sewable EL Wire in Light Blue and Deep Blue
6) 1 x 1m length of Stiff EL Wire in Aqua
7) 2 x 50cm lengths of Maxi EL Wire in Blue and Purple (this has a blue tone to it)
8) 1 x 2 x 12cm length of Light Blue EL Tape
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black.
2) All White - Mix of Types
Choose this option if you want try out our White wires, and we will send you a selection of different wires and diameters.
In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in White
2) 1 x 1m length of 2.3mm EL Wire in White
3) 1 x 1m length of 3.2mm EL Wire in White
4) 1 x 1m length of 5mm EL Wire in White
5) 1 x 1m length of Sewable EL Wire in White
6) 1 x 1m length of Stiff EL Wire in White
7) 1 x 1m length of Maxi EL Wire in White
8) 1 x 2 x 12cm EL Tape in White
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black
3) Mixture of all Colours and Types
Choose this option if you want try out all of our colours, and we will send you a selection of different wires and diameters
In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in White
2) 1 x 1m length of 2.3mm EL Wire in Red
3) 1 x 1m length of 3.2mm EL Wire in Light Blue
4) 1 x 1m length of 5mm EL Wire in Orange
5) 1 x 1m length of Sewable EL Wire in Yellow
6) 1 x 1m length of Stiff EL Wire in Lime
7) 1 x 1m length of Maxi EL Wire in Pink
8) 1 x 2 x 12cm EL Tape in Light Blue
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black
Our wires are available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green and White

Our wires are available in any of these types: 1.0mm, 1.5mm, 2.3mm, 3.2mm, 5mm, Stiff, Ultra and sewable

All of our sample packs come with:
1) 5-15m adaptable driver with (mains plug- relevant to your location) (email us - if you would like a battery option)

2) Splitters to 'drive' all the wires at the same time.
3) 2 x 12cm EL Panel
Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White.
The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector attached and so is ready to clip into an EL Driver.
A wide selection of other EL Tape, EL Panels, Sequencers, Drivers and helpful EL accessories are available from our store
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH OF EL WIRE LISTED AS WE TAKE CUSTOM ORDERS - TPLEASE BE AWARE THERE IS A MINIMUM ORDER REQUIREMENT FOR CUSTOM ORDERS.

EL wire has loads of uses
It has an amazing neon string effect when decorating the interior or exterior of the home, cars, motorbikes, bicycles and trailers. It can be used to make faux neon signs and attached to costumes and even be threaded into clothes and hats. It can be used as safety lighting and mood lighting.
If you already have a Li-ion battery charger, this option is for you.
Our rechargeable Li-ion batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.
While trying out different battery systems, we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.
They also feature overcharge protection.
They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.
We have these batteries in 4 different sizes:
1800mAh (Thin): 145g (10cm x 5.5cm x 1.1cm)
1800mAh (Square): 125g (5.6cm x 3.8cm x 3.1cm)
3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)
5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)
15Ah: 725g (14.0cm x 6.5cm x 4.7cm)
SPECS:
Capacity: 1800mAh, 3000mAh or 5000mAh
Input power: DC 12.6V
Output: DC 12V
Over-charge / discharge protection: Yes
-

No Li-ion Battery Charger
If you already have a dedicated intelligent Li-ion battery charger, this option is for you.
Our dedicated UK mains intelligent Li-ion battery chargers are available in 1A and 2A versions.
Specifications are:
1A
Input: 100 - 240V AC 0.8A 50/60hz.
Output: 12.6 V DC 1000mA
2A
Input: 100 - 240V AC 1A 50/60Hz
Output: 12.6V DC 2000mA
-

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.
While trying out different battery systems we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.
They also feature overcharge protection.
They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.
We have these batteries in 4 different sizes with the following weights and dimensions:
1800mAh (Thin): 145g (10cm x 5.5cm x 1.1cm)
1800mAh (Square): 145g (5.6cm x 3.8cm x 3.1cm)
3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)
5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)
15Ah: 725g (14.0cm x 6.5cm x 4.7cm)
SPECS:
Capacity: 1800mAh, 3000mAh or 5000mAh
Input power: DC 12.6V
Output: DC 12V
Over-charge / discharge protection: Yes
AC Mains Charger: UK Plug
-
These Li-ion batteries are best charged with dedicated Li-ion Intelligent Chargers.

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.
While trying out different battery systems we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.
They also feature overcharge protection.
They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.
We have these batteries in 4 different sizes with the following weights and dimensions:
1800mAh (Thin): 145g (10cm x 5.5cm x 1.1cm)
1800mAh (Square): 125g (5.6cm x 3.8cm x 3.1cm)
3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)
5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)
15Ah: 725g (14.0cm x 6.5cm x 4.7cm)
SPECS:
Capacity: 1800mAh, 3000mAh or 5000mAh
Input power: DC 12.6V
Output: DC 12V
Over-charge / discharge protection: Yes
AC Mains Chargers are available with a UK plug
These Li-ion batteries are best charged with dedicated Li-ion Intelligent Chargers.
-

1.0mm Fine EL Wire @ £5 per metre
This fine EL Wire is one of the brightest of all the types of EL Wire and is also very malleable and will hold its shape when bent like a kind of neon modelling wire, making it a fun and useful material to work with.

EL Wire twisted into ringlets

EL Wire twisted into a zig-zag pattern
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED.
The colours we have at present are:
Light Blue (Tron Blue), Mint Green and White
In these lengths:
50cm, 1metre, 3metre, 5metre, 10metre, 25metre and 30metre
- - - - - - - - - - - -
This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same driver.
By using splitters you can also connect as many strands of the glowing wire to the same driver

EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
This wire can be cut into smaller lengths and attached to another driver
Our drivers can run many strips of wire as long as the total length of the wire is under the drivers maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed
Joining tape and tubing for re-attaching the wire are available from this store
- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will also definitely need some wire strippers
You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle
There are How-tos and a forum on the site to get some great tips
1.3mm Fine 'Angel Hair' EL Wire @ £4 per Metre
This 'Angel Hair' EL Wire is a very light diameter of EL Wire, making it a fun and useful material to work with if you're attaching to light fabric.

EL Wire twisted into ringlets

EL Wire twisted into a zig-zag pattern
The colours we stock in this diameter are:
Light Blue (Tron Blue), Deep Blue, Pink, Orangey-Red, Yellow, Lime Green, Turquoise-Green and WhiteWhite
And in these lengths: 10cm / 50cm / 1 metre / 3 metre / 5 metre / 10 metre / 15 metre / 30 metre
This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same Driver.
By using Splitters you can also connect many strands of the glowing wire to the same Driver.

EL wire has loads of uses!
This neon wire looks amazing when decorating the interior or exterior of cars, it can be used inside and outside of the home and office and can even be threaded into clothes and hats.
Our Drivers can run many lengths of wire as long as the total length of the wire is under the Drivers maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed.
Joining tape and tubing for re-attaching the wire are available from this store
- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different Driver
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will definitely need some wire strippers
You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle
There are How-tos and a forum on the site to get some great tips
1.3mm Orange Fine 'Angel Hair' EL Wire @ half price (£2.00 per metre)
This 'Angel Hair' EL Wire is not only the brightest of all the thicknesses of EL Wire it is also the most malleable and will hold its shape when bent like a kind of neon modelling wire, making it a fun and useful material to work with.

EL Wire twisted into ringlets

EL Wire twisted into a zig-zag pattern
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED.
This listing is for Orange and available in these lengths: 10 centimetre and 3 metres.
This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same driver.
By using splitters you can also connect as many strands of the glowing wire to the same driver

EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
This wire can be cut into smaller lengths and attached to another driver
Our drivers can run many strips of wire as long as the total length of the wire is under the drivers maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed
Joining tape and tubing for re-attaching the wire are available from this store
- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will also definitely need some wire strippers
You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle
There are How-tos and a forum on the site to get some great tips
MAXI EL Wire - 1.5mm High Brightness @ £5 per metre
MAXI EL Wire lives up to its name by bringing together the latest breakthroughs in electroluminescent technology to create a high brightness glowing wire that outshines standard EL Wire.
At 1.5mm in diameter, you will find that whilst making patterns with the MAXI EL Wire, it will hold itself rigid when bent into its desired shape. 1.0mm fine EL Wire also does this, but MAXI EL Wire creates a much more rigid form.
The Maxi EL Wire is more robust than the Ultra EL Wire and is as reliable as the standard EL Wire.
The bend radius of MAXI EL Wire is 5mm; the same as our standard EL Wire.
Breaking strain is at 1kg also the same as our standard EL Wire.
Pressure on the MAXI EL Wire should not be more than 1kg; the same as our standard EL Wire.
These spectacular improvements are due to a thicker copper core giving a greater area of luminosity and helps the EL Wire hold its shape.
MAXI EL Wire uses exactly the same Splitters, Drivers and Sequencers as standard EL Wire.
This remarkable glowing wire is £5 per metre and is available in 50cm, 1 metre, 3 metre, 5 metre, 10 metre and 25 metre lengths (with connectors attached).
It is available in Light Blue, Lime Green, Orange, Yellow, Deep Blue, Deep Pink, Pink and White

Comparing Standard, MAXI and ULTRA EL Wire
As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
The EL Wire has a connector already attached so is ready to simply clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
A wide selection of other EL Tapes, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our store.

2.3mm diameter EL Wire @ £2.50 per metre
The 2.3mm diameter Electroluminescent wire is our cheapest standard EL Wire,
it is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green, and White
300 metre lengths are only available in Lime, Light Blue, Deep Blue, Red and WhiteWhite
2.3mm diameter EL Wire is available in the following lengths:
1 metre, 3 metre, 5 metre, 15 metre, 10 metre, 100 metre and 300 metre
(The 3.2mm diameter wire is also available in 10 metre and 25 metre lengths)
Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White.
The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector on it so is ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our store
We take custom orders for custom lengths of EL Wire.

This wire comes with a standard connector already attached so simply plugs into any EL Driver.
By using 'Splitters' you can also connect different strands to just one Driver
EL wire has loads of uses!
It has an amazing neon string effect when decorating the interior or exterior of cars and motorbikes and can be used inside and outside of the home and office and can even be threaded into clothes and hats
3.2mm EL Wire @ £3 per metre
The 3.2mm EL Wire is favoured by makers as it is robust and its thickness offers protection while still having a bright neon effect. When placed on a costume or other project it keeps straight lines without showing kinks
It is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Grass Green, Turquoise-Green and White
Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED

- - - - - - - - - - - -
This wire comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver
By using splitters you can also connect different strands to the same driver
EL wire has loads of uses
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
This wire can be cut into smaller lengths and attached to another inverter
Our inverters can run many strips of wire as long as the total length of the wire is under the inverters maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed
Joining tape and tubing for attaching EL Wire is available from this store
this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will also definitely need some wire strippers.
You can happily use the joining tape and heat shrink tubing supplied for a decent join but if the joint is likely to encounter stress (e.g if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g behind a panel in a car) then we would advise soldering to avoid future hassle
It is a cliché to say you are only limited by your imagination but with this neon string it is true!!!
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours
We're sure you will be amazed - feel free to email or ring us with any questions
These tiny EL Panels are really handy and can have so many uses.
They run off any EL Driver and you can 'daisy chain' splitters to have as many as you want lit up.
The item we offer to you is a versatile 2.4cm wide and 4.5cm long Electroluminescent Panel.
This panel comes with 10.5cm's wire lead and 9cm's of super thin FFC tape that's even thinner that the panel for great flexibility.


With a driver, these glow very brightly making them ideal for the eye piece in masks.
The panel itself is less than half a millimetre thick but is not see-through.
White, Light Blue, Red or Green

EL Tape is an incredibly versatile material it can be bent and wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape.
All our EL Wire and EL Tape has connectors attached so (with the right driver) it is just plug and play
Standard EL Tape with wires and connector
We have EL Panels and EL Tape in all sorts of shapes and sizes
Including animated and sound activated moving panels!
