This handy item is an enclosed battery box that takes 8 x AA batteries (batteries not supplied) and gives an output of 12v.
*Please note this is just a battery box, IT IS NOT AN EL DRIVER/INVERTER. They are available as a power supply for our EL Drivers or EL Sequencers.*
The size of this power pack is:
127mm x 72mm x 19mm and the lead for the output is 17cm long with a 2.1mm/5.5mm plug on the end.
This is a useful item for when you need to power a 12v appliance that you want to make portable
REMEMBER:
Standard alkaline batteries are 1.5v each, so 8 of them will make 12v, however rechargeable batteries are only1.2v each, so 8 of them in this battery pack will only produce 9.6v.
- - - - - - - - - - - - - - - - - -
These battery packs are used to power powerful driver/inverters for EL wire
If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours
We're sure you will be amazed - feel free to message us with any questions.
This handy item is a battery box that takes 3 x 18650 batteries and gives an output of just under 12V
*Please note this is just a battery box IT IS NOT AN EL DRIVER/INVERTER. . They are available as a power supply for our EL Drivers or EL Sequencers.*
18650 batteries are the long round flat ended rechargeable 'INR' or 'IMR' batteries which have become popular since they are used in vaping rigs.
We have made this battery box to power the 12v EL Drivers and Sequencers,
The 18650 batteries are 3.7v each, so the power input from this Battery Box with 3 is a total of 11.1V
We have found this barely makes a difference when powering EL Drivers compared to the convenience of these rechargeable batteries
This Battery Box comes with a standard 2.1mm/5.5mm connector
The size of the Battery Box power pack is 75mm x 60mm x 20mm and the output lead is 250mm long.
- - - - - - - - - - - - - - - - - -
These battery packs are used to power powerful driver/inverters for EL wire
If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours
We're sure you will be amazed - feel free to message us with any questions.
This is a fused Car Lighter Attachment that plugs in to a 2.1mm/5.5mm Jack Plug, making it suitable for powering any of our 12v EL Drivers
These connectors are suggested to be used with our adaptable drivers
If you have never seen EL wire, have a look at my other items - it is basically a thin cool glowing neon wire
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours
We're sure you will be amazed - feel free to message us with any questions.
These are simply crocodile clips attached to a 2.1mm/5.5mm Jack Plug, to allow you to power off of an external 12v Battery
These connectors are suggested to be used with our adaptable drivers
If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours
We're sure you will be amazed - feel free to message us with any questions.
Portable Mini Driver for 1 metre EL Wire or 50sq cm EL Tapes/Panels
Here we have a really handy small portable EL Driver that takes 1 x AAA battery (battery not supplied).
It's dimensions are: 5.1cm x 2.9cm x 1.5cm and it can power up to 2 metres of EL Wire but it is ideal when running 1 metre or under of EL Wire.
When it is used to drive more than 1 metre of EL Wire, the whistle of the inverter becomes audible.
(This is important to consider if you are using it in a hat or mask)
The driver has a switch with 3 settings: On / Off / Flash
This EL Driver has an 8cm long output wire with a standard EL wire connector on the end
Use this to connector plug in EL Wire or a Splitter
*All the EL wire we supply comes with a connector, so they plug straight into the driver*
**EL Drivers contain an inverter that switches the current from DC to AC and increases the voltage - for this reason EL Drivers are often called EL Inverters - they are the same thing**
Using a splitter, this driver can run many strands and colours of EL wire as long as the total length of wire is 2 meters or under
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.
- - - - - - - - - - - -
EL wire has loads of uses.
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.
The EL wire can be cut into smaller lengths and attached to another driver.
Or with some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed.
It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.
We're sure you will be amazed - feel free to message us with any questions.
Buckle Driver for 1m EL Wire
This is a really handy small portable EL Driver that runs off of 3 x AG13 batteries (not supplied)
It is only: 6cm x 3.5cm x 1.3cm
It can run 1 metre of EL wire or 25squ cm or under,
The whole unit comes in two parts that each have a 2.5cm wide belt loop built in. These click together so the driver can easily be built into any rucksack or a thin belt
The driver has a button with 3 settings:
On / Flash / Off
This EL Driver has an 8cm output wire with a standard EL wire connector on the end.
Use this to connector plug in EL Wire or a Splitter.
*All the EL wire we supply comes with a connector, so they plug straight into the driver*
**EL Drivers contain an inverter that switches the current from DC to AC and increases the voltage - for this reason EL Drivers are often called EL Inverters - they are the same thing**
Using a splitter, this driver can run many strands and colours of EL wire as long as the total length of wire is 1 metre or under.
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.
- - - - - - - - - - - -
EL wire has loads of uses.
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.
-
The EL wire can be cut into smaller lengths and attached to another driver.
Or with some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed.
It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.
We're sure you will be amazed - feel free to message us with any questions.
These tiny EL Panels are really handy and can have so many uses.
They run off any EL Driver and you can 'daisy chain' splitters to have as many as you want lit up.
The item we offer to you is a versatile 2.4cm wide and 4.5cm long Electroluminescent Panel.
This panel comes with 10.5cm's wire lead and 9cm's of super thin FFC tape that's even thinner that the panel for great flexibility.
With a driver, these glow very brightly making them ideal for the eye piece in masks.
The panel itself is less than half a millimetre thick but is not see-through.
White, Light Blue, Red or Green
EL Tape is an incredibly versatile material it can be bent and wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape.
All our EL Wire and EL Tape has connectors attached so (with the right driver) it is just plug and play
Standard EL Tape with wires and connector
We have EL Panels and EL Tape in all sorts of shapes and sizes
Including animated and sound activated moving panels!
These tiny EL Panels are really handy and can have so many uses. They run off any EL Driver and you can 'daisy chain' Splitters to have as many as you want lit up.
The item we offer to you is a versatile 3cm wide and 5cm long Electroluminescent Panel.
With a Driver, these glow very brightly making them ideal for the eye pieces in masks.
The panel itself is less than half a millimetre thick but is not see-through.
The Panels are £2.99 each
In the drop down menu you can choose to have:
Single 3cm x 5cm EL Panels
2 x Panels plus a 2 Way Splitter
2 x Panels plus a 2 Way Splitter and a 2xAA battery operated Driver / Inverter
4 x Panels plus a 4 Way Splitter
Or 4 x Panels, plus a 4 Way Splitter and a 2xAA battery operated Driver / Inverter.
Other inverters, EL Panels, EL Tapes and EL Wire are available in our online store.
Or feel free to contact us if you have any questions.
The 3cm x 5cm are currently available in these colours:
Light Blue (Tron Blue), Red, Pink, Deep Pink, White, Grass Green and Deep Blue
EL Tape is an incredibly versatile material it can be bent and wrapped around things and can even have holes and shapes punched into it and be cut to your chosen shapes.
All our EL Wire and EL Tape has connectors already attached so, (with the right Driver), it is just plug and play
Standard EL Tape with wires and connector
We have EL Panels and EL Tapes in all sorts of shapes and sizes, including animated and sound activated moving EL Panels!
2 way Switch Splitter with "Middle: ALL ON"
2 Way Splitter with "Middle: ALL ON" Switch
These splitters are a handy and cheap way of making different parts of your EL costume/project light up
The EL Splitter Switch is simply a 2 way splitter with a 3 way switch on it
the switch has three positions:
Switch to the left: Channel A ON + Channel B OFF
Switch to the right: Channel A OFF + Channel B ON
Switch in the middle: Both Channels ON
(we also have another "Both OFF" switch splitter - on this one, the Switch in middle is both channels OFF)
The spitter is 20cm in total and it is often used with extender wires running down the sleeve to allow the switch splitter to sit in your hand
-
This "Middle: All ON" Switch Splitter is useful is you want to control the EL Wire of two different parts of the same project
(This costume is made slightly more complicated by the fact the Mask part is constantly ON - a full description is below)
On this costume there is a two-way splitter straight after the EL Driver
Channel 1 leads up to the head part of the costume so this is constantly ON
Channel 2 leads to the Splitter Switch
The Splitter Switch itself is a 2 way splitter so coming out of this is:
Channel A goes to the EL Wire that makes the Body of the costume
Channel B goes to the EL Wire that makes the Legs of the costume
The wearer can then control if they want it all lit up, or just the body lit, or just the legs lit up
We also provide this splitter where the Middle setting is BOTH OFF - click here to have a look
*ALL the EL wire we supply comes with a universal EL connector, so they plug straight into one of these splitters or a driver*
- - - - - - - - - - - -
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours
We're sure you will be amazed - feel free to message us with any questions
2 Way Switch Splitter with "Middle: ALL OFF"
These splitters are a handy and cheap way of making different parts of your EL costume/project light up
The EL Splitter Switch is simply a 2 way splitter with a 3 switch on it
The switch has three positions:
Switch to the left: Channel A ON + Channel B OFF
Switch to the right: Channel A OFF + Channel B ON
Switch in the middle: Both Channels OFF
(we also sell a different "Both ON" switch splitter - on this type, the Switch in middle is both channels ON)
The spitter is 20cm in total and it is often used with extender wires running down the sleeve to allow the switch splitter to sit in your hand
-
This "Middle: All OFF" Switch Splitter is useful is you want to overlay two different designs onto one project
This is a mask that was made with two different designs on it. On one channel of the splitter is the EL Wires of the Alien Face, the other channel connects to the EL Wires for the Crazy Face
The wearer can have the mask with the Crazy Face showing and then, when they want to freak people out, just flick the switch across so the Alien Face appears
We also provide this splitter where the Middle setting is BOTH ON - click here to have a look
*ALL the EL wire we supply comes with a universal EL connector, so they plug straight into one of these splitters or a driver*
- - - - - - - - - - - -
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
It is a cliche to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours
We're sure you will be amazed - feel free to message us with any questions
Enclosed Battery Box (8 x AA) - 12V PORTABLE POWER PACK
This handy item is an enclosed battery box that takes 8 x AA batteries (batteries not supplied) and gives an output of 12v.
*Please note this is just a battery box, IT IS NOT AN EL DRIVER/INVERTER. They are available as a power supply for our EL Drivers or EL Sequencers.*
The size of this power pack is:
127mm x 72mm x 19mm and the lead for the output is 17cm long with a 2.1mm/5.5mm plug on the end.
This is a useful item for when you need to power a 12v appliance that you want to make portable
REMEMBER:
Standard alkaline batteries are 1.5v each, so 8 of them will make 12v, however rechargeable batteries are only1.2v each, so 8 of them in this battery pack will only produce 9.6v.
- - - - - - - - - - - - - - - - - -
These battery packs are used to power powerful driver/inverters for EL wire
If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours
We're sure you will be amazed - feel free to message us with any questions.
This handy item is a battery box that takes 3 x 18650 batteries and gives an output of just under 12V
*Please note this is just a battery box IT IS NOT AN EL DRIVER/INVERTER. They are available as a power supply for our EL Drivers or EL Sequencers.*
18650 batteries are the long round flat ended rechargeable 'INR' or 'IMR' batteries which have become popular since they are used in vaping rigs.
We have made this battery box to power the 12v EL Drivers and Sequencers,
The 18650 batteries are 3.7v each, so the power input from this Battery Box with 3 is a total of 11.1V
We have found this barely makes a difference when powering EL Drivers compared to the convenience of these rechargeable batteries
This Battery Box comes with a standard 2.1mm/5.5mm connector
The size of the Battery Box power pack is 76mm x 60mm x 19mm and the output lead is 250mm long.
- - - - - - - - - - - - - - - - - -
These battery packs are used to power powerful driver/inverters for EL wire
If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours
We're sure you will be amazed - feel free to message us with any questions.
Complete the party or festival look with these new sound activated, flashing masks
This mask has a wicked flashing teeth pattern when plugged in and exposed to sound, making it great for parties, clubs or festivals, day or night
This mask contains a small pocket which houses the driver below the chin and comes with a standard sound activated driver. The mask is fastened with Velcro behind the head.
EL Button - 3cm diameter circle
For Detroit:Become Human, please check out our newest 2cm small EL Hoop.
https://elwirecraft.co.uk/product/2cm-round-hoop-flat-el-panel-detroit-become-human-style/
Here we have a 3cm diameter circle of Electro-Luminescent Tape available in Light Blue (Tron Blue), Pink, Red, Orange,Yellow, Grass Green and White
This EL Button has been designed to help you achieve a realistic Tron costume.
3 EL Buttons in a row
Like all EL Tape and EL Wire, the EL Buttons need an Inverter/Driver to make it glow - you have the option in the drop-down menu, to buy these hoops with a 2 x AA battery Driver - there is a bigger selection in our online store including 'Splitters' so that you could have up to 10 of them attached to a single Driver.
Standard EL Tape with wires and connector
The EL Buttons have loads of other creative uses but are especially good for making realistic Tron costumes
The EL Button is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration
We have a whole range of EL Wire, EL Tape, EL Panels and many types of Driver/Inverters are also available.
If you want any help or advice in planning your EL costume, please contact us and speak to a member of our team.
Splitter for 2.1mm/5.5mm 12V LED power supply - use 1 power supply
Here we have splitters for a 2.1mm/5.5mm 12v LED power supply.
This is extremely useful if you have multiple LED emitters, light sources or drivers that you want to run off a single power supply.
The total length of the splitter is 400mm with 190mm before the split.
These splitters are available in:
2 way (useful for powering 2 x LED emitters from 1 x power supply),
3 way (useful for powering 3 x LED emitters from 1 x power supply),
4 way (for powering 4 x LED emitters from 1 x power supply),
5 way (for powering 5 x LED light sources from 1 x power supply),
6 way (for powering 6 x LED light sources from 1 x power supply) and
8 way (for powering 8 x LED light sources from 1 x power supply).
Please select your preferred option from the drop down menu.
Feel free to message us with any questions.
Splitter For 2.1mm/5.5mm 12v power supply
This is a 2 Way 12v Splitter for a 2.1mm/5.5mm 12v Input
This is useful if you have two 12v Drivers that you want to power from a single power input.
These connectors are suggested to be used with our adaptable drivers
If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire
EL wire has loads of uses
This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats.
If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours
We're sure you will be amazed - feel free to message us with any questions you may have.