Sewable EL Wire - Easy Sew Tag @ £3.50 per metre
This handy item is a 2.3mm EL wire with sewable tag running along it; it is available in lengths of 50cm, 1m, 3m, 5m and 10 metre.
(EL wire needs a Driver to make it glow - available from £4 in the Inverter/Driver section of the website).
-
EL Wire twisted into a spiral
The wire is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green (being discontinued), Grass Green and White
Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector already attached and ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
By using splitters you can also connect different strands to the same Driver.
EL wire has loads of uses
It looks amazing when decorating the interior or exterior of cars and motorbikes and can be used inside and outside of your home and office and can even be threaded into clothes and hats.
Our Drivers can run many lengths of EL wire as long as the total length of the wire is under the Driver's maximum capacity
Cutting the wire into the length you choose is simple
LED emitters (3mm) with a choice of 6 vivid colours and power supply
These high quality LED emitters are super bright and even noticeably glow in daylight. They can be powered with a variety of our 12V power sources - just plug the power source in and let your creativity loose.
This LED emitter is compatible with 3mm diameter LED fibre optic lighting cable.
This very versatile light source is available in 6 vivid colours: Light Blue, Pink, Red, Orange, Green and White
You can join them together using our 12V LED power supply splitters.
3 way splitter for 12V LED power supply
LED's would usually need a controller, these have one already built in.
We have multiple power source options available:
1) Crocodile Clips
Perfect if you already have your own 12V battery to run these LED emitters.
2) 8 x AA Battery Box
This 8 x AA Battery Box will plug straight into the emitter. It is fairly large (127mm x 72mm x 19mm) but will make these LED emitters portable.
3) 3 x 18650 Rechargeable Battery Box
This 3 x 18650 Rechargeable Battery Box will plug straight into these LED emitters. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make the emitter portable.
4) Rechargeable Li-ion Battery
Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes
1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)
1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)
3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)
5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)
All of these Li-ion Batteries come with an intelligent recharger
5) Mains Powered
This handy PSU can be used to power these LED emitters off of Mains Electricity (UK, US or EU plugs are available)
6) Car Lighter Adaptor
This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories
1.3mm Fine 'Angel Hair' EL Wire @ £4 per Metre
This 'Angel Hair' EL Wire is a very light diameter of EL Wire, making it a fun and useful material to work with if you're attaching to light fabric.
EL Wire twisted into ringlets
EL Wire twisted into a zig-zag pattern
The colours we stock in this diameter are:
Light Blue (Tron Blue), Deep Blue, Pink, Orangey-Red, Yellow, Lime Green, Turquoise-Green and WhiteWhite
And in these lengths: 10cm / 50cm / 1 metre / 3 metre / 5 metre / 10 metre / 15 metre / 30 metre
This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same Driver.
By using Splitters you can also connect many strands of the glowing wire to the same Driver.
EL wire has loads of uses!
This neon wire looks amazing when decorating the interior or exterior of cars, it can be used inside and outside of the home and office and can even be threaded into clothes and hats.
Our Drivers can run many lengths of wire as long as the total length of the wire is under the Drivers maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed.
Joining tape and tubing for re-attaching the wire are available from this store
- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different Driver
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will definitely need some wire strippers
You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle
There are How-tos and a forum on the site to get some great tips
MAXI EL Wire - 1.5mm High Brightness @ £5 per metre
MAXI EL Wire lives up to its name by bringing together the latest breakthroughs in electroluminescent technology to create a high brightness glowing wire that outshines standard EL Wire.
At 1.5mm in diameter, you will find that whilst making patterns with the MAXI EL Wire, it will hold itself rigid when bent into its desired shape. 1.0mm fine EL Wire also does this, but MAXI EL Wire creates a much more rigid form.
The Maxi EL Wire is more robust than the Ultra EL Wire and is as reliable as the standard EL Wire.
The bend radius of MAXI EL Wire is 5mm; the same as our standard EL Wire.
Breaking strain is at 1kg also the same as our standard EL Wire.
Pressure on the MAXI EL Wire should not be more than 1kg; the same as our standard EL Wire.
These spectacular improvements are due to a thicker copper core giving a greater area of luminosity and helps the EL Wire hold its shape.
MAXI EL Wire uses exactly the same Splitters, Drivers and Sequencers as standard EL Wire.
This remarkable glowing wire is £5 per metre and is available in 50cm, 1 metre, 3 metre, 5 metre, 10 metre and 25 metre lengths (with connectors attached).
It is available in Light Blue, Lime Green, Orange, Yellow, Deep Blue, Deep Pink, Pink and White
Comparing Standard, MAXI and ULTRA EL Wire
As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
The EL Wire has a connector already attached so is ready to simply clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
A wide selection of other EL Tapes, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our store.
2.3mm diameter EL Wire @ £2.50 per metre
The 2.3mm diameter Electroluminescent wire is our cheapest standard EL Wire,
it is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green, Turquoise-Green and White
300 metre lengths are only available in Lime, Light Blue, Deep Blue, Red and WhiteWhite
2.3mm diameter EL Wire is available in the following lengths:
1 metre, 3 metre, 5 metre, 15 metre, 10 metre, 100 metre and 300 metre
(The 3.2mm diameter wire is also available in 10 metre and 25 metre lengths)
Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White.
The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector on it so is ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our store
We take custom orders for custom lengths of EL Wire.
This wire comes with a standard connector already attached so simply plugs into any EL Driver.
By using 'Splitters' you can also connect different strands to just one Driver
EL wire has loads of uses!
It has an amazing neon string effect when decorating the interior or exterior of cars and motorbikes and can be used inside and outside of the home and office and can even be threaded into clothes and hats
EL Tape - 1.5cm x 15cm of EL Glow Tape
This listing is for a 1.5 cm wide and 15cm long Electro-Luminescent Tape.
Currently, in stock we have these colours: Light Blue (Tron Blue), Deep Blue, Red, Pink, Orange, Green and White
On the back of the EL Tape it has wires with connectors already attached
This EL Tape needs an Inverter/Driver to make it glow
The drop down menu gives you the options to buy this item with a 2 x AA battery inverter, 1 x AAA mini driver or no driver.
EL Tape is an incredibly versatile material it can be wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape
This Tape is also available in 2cm x 12cm, 25cm, 40 cm and 1 metre lengths
3.2mm EL Wire @ £3 per metre
The 3.2mm EL Wire is favoured by makers as it is robust and its thickness offers protection while still having a bright neon effect. When placed on a costume or other project it keeps straight lines without showing kinks
It is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Grass Green, Turquoise-Green and White
Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED
- - - - - - - - - - - -
This wire comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver
By using splitters you can also connect different strands to the same driver
EL wire has loads of uses
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
This wire can be cut into smaller lengths and attached to another inverter
Our inverters can run many strips of wire as long as the total length of the wire is under the inverters maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed
Joining tape and tubing for attaching EL Wire is available from this store
this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will also definitely need some wire strippers.
You can happily use the joining tape and heat shrink tubing supplied for a decent join but if the joint is likely to encounter stress (e.g if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g behind a panel in a car) then we would advise soldering to avoid future hassle
It is a cliché to say you are only limited by your imagination but with this neon string it is true!!!
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours
We're sure you will be amazed - feel free to email or ring us with any questions
Basic EL Wire Set = 3 x 1 metre EL Wire + Driver
3 x 1 Metre of EL Wire, Splitter and Portable Driver for up to 5 metres of EL Wire.
This listing is for:
1) 3 x 1 metre of high quality (3.2mm) Electroluminescent Wire
2) 2 x AA portable Driver (with Flash)
3) Standard 3 way Splitter
The splitter lets you have 3 x 1 metre lengths of EL Wire attached to one driver/inverter - This gives you greater control and flexibility in the design of your costume.
4) 30 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine
The EL Wire can be any combination of these colours:
Light Blue, Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White
The 3.2mm diameter EL Wire is one of our brightest!
To make it easier to design your outfit, below are the dimensions of the inverters and lengths of connecting wires - there are also tips on how to create your costume.
POWER PACK / INVERTER (Driver)
The Power Pack takes 2 x AA batteries and has a built-in voltage inverter that 'inverts' the 3Volts from the batteries up to the 100Volts needed to make the EL Wire glow.
The power pack/inverter dimensions are: 9cm x 3.2cm x 2cm
It has the following controls: On / Flash / Strobe / Off
It has an 8cm wire coming out of it that leads to the...
SPLITTER: The Splitter is 40cm long in total; it is 20cm of wire which then splits into 3 separate strands which are all 20cm long and lead to the...
EL WIRE
There is then another 20-25cm from the connector until the actual glowing start of EL Wire - then there are 3 x 1 metre lengths of gorgeous glowing wire!
Its not complicated or fiddly
This set can turn some clothing into a Tron fancy dress in many ways:
1 metre goes down each arm and
1 metre for the front of the costume
OR
1 metre can go across the back and part way down the arm
1 metre to make a helmet
1 metre for the front of the costume
The whole kit is ready to use - just plug and play!
We have some crazy glowing masks & glasses that go well with this kit - take a look!
CHASING EL Wire 1.3mm - HALF PRICE (£ 2.50 p/m)
We are now making our standard Chasing EL Wire to be 2.3mm in diameter
So, lucky for you, we are getting rid of our old stock of 3.2mm and 1.3mm Chasing EL Wire and it is now HALF PRICE - at just £2.50 p/m (until stocks last)
This listing is for 1.3mm fine Electroluminescent glow wire with a chasing motion.
This Chasing 'Angel Hair' EL Wire is very bright and the chasing motion looks amazing
It flows in one continuous motion (it jumps a bit in this picture but that is just the video)
EL Chasing Wire
-
EL Chasing Wire
It is available in any of these colours:
Light Blue (Tron Blue), Lime Green, Deep Blue, White, Gold, Pink, Green, Red, Purple and Turquoise Green
The wire has a special connector on it so does not clip into standard EL Wire connectors and needs a Chasing EL Wire Driver (see drop down menu above)
This Chasing Wire is available in 1metre, 3metre and 5metre lengths as well as the thicker 3.2mm Chasing Wire
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available in our online store
EL wire has loads of uses!
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and office and can even be threaded into clothes and hats.
It is a cliché to say you are only limited by your imagination but with EL wire it is true!
If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours.
We're sure you will be amazed - feel free to message us with any questions you may have.
EL Tape - 2cm x 12cm - Neon Glow Strip
This is for a 2cm wide and 12cm long Electro-Luminescent Tape.
Currently, in stock we have these colours: Light Blue (Tron Blue), Deep Blue, Red, Pink, Deep Pink, Orange, Yellow, Green and White
On the back of the EL Tape it has wires with connectors already attached:
EL Tape is an incredibly versatile material it can be wrapped around things.
To join it to a costume we recommend our ''''sewable loop & stick-able hook'''' Velcro which allows you to sew one part of the Velcro to your costume while the stick pat goes on the back of this tape. The tape can then be removed from the costume to wash it
EL Tape can even have holes and shapes punched into it and be cut to your chosen shape
This Tape is also available in 25cm, 40cm and 1 metre lengths
A 2 x AA inverter can power four of these 12cm EL Tapes and an 8 x AA inverter can power just over 2 metres of EL Tape.
EL Tape - 2cm by 12cm With Bend Half Way
This is a 2cm wide and 12cm long Electroluminescent Tape with a 45º bend in the middle available in:
Light Blue (Tron Blue), Deep Blue, Pink, Deep Pink, Red, Orange, Grass Green and White
This EL Curve has been designed to help you achieve a realistic Tron costume.
As you can see in the picture below it is perfectly suited for use with straight EL Tape and the EL Hoops
EL Tape, Curve and Hoop in the Tron Style
All our El Wire and Tape comes with wires and connectors attached
Like all EL Tape and EL Wire the EL Curve needs an Inverter/Driver to make it glow
On this EL Curve, the wires are connected in the middle of the bend so either end can be cut to a shape you need
Standard EL Tape with wires and connector
We also stock a wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories
The EL Curves have loads of other creative uses but are especially good for making realistic Tron costumes
The EL Curve is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration
We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.
If you want any help or advice in planning your EL costume feel free to get in touch
5mm THICK EL Wire @ £4 per metre
The 5mm EL Wire is the least brightest of different diameters of EL Wire, but is ideal for outdoor applications - Sunlight is not good for EL Wire and the thick coating on this wire protects it more.
Some people also prefer this thicker wire for its 'chunky neon cable' look but will not bend into the rightangles required for some letters of the alphabet.when you're making a faux neon sign.
The colours we have at present are:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green, Turquoise-Green and White
This 5mm thick EL wire is available in the following lengths: 10cm, 1 metre, 3 metre, 5 metre, 10 metre
This wire comes with a standard connector already attached so that it simply plugs into any EL Driver.
By using 'Splitters' you can also connect different strands to the same Driver.
EL wire has loads of uses!
It has an amazing neon string effect when decorating the interior or exterior of cars, can be used inside and outside of your home and office and can even be threaded into clothes and hats.
This wire comes as 'plug and play' but if you want to get more technical you can be cut into smaller lengths
Our EL inverters can run many lengths of wire as long as the total length of the wire is under the Driver/Inverters maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed
Joining tape and tubing for re-attaching the wire are available from this store
- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention so you will definitely need some wire strippers.
You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostled) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle
There are How-tos and a forum on the site to get some great tips
STIFF EL Wire 2.3mm @ £5 per metre
Stiff EL Wire lives up to its name as a mould-able, bendable wire suitable for making signs or shapes.
At 2.3mm in diameter, you will find while making patterns with this Stiff EL Wire, it will hold itself rigid when bent into its desired shape and is robust with a strong connector
The bend radius of Stiff EL Wire is 5mm which is the same as our standard EL Wire as is the breaking strain at 1kg
Pressure on the Stiff EL Wire should not be more than 1kg, this means it cannot be pinched too hard or trodden on
This Stiff EL Wire is unlike the standard EL Wire. The 1.0mm, MAXI and ULTRA also share this property, but because of a reinforced copper core, the Stiff EL Wire definitely holds its shape best.
Stiff EL Wire uses exactly the same splitters, drivers and sequencers as standard EL Wire
This remarkable bendy wire is £5 per metre and is available in 50cm, 1metre, 3metre, 5metre, 10metre and 25metre lengths (with connectors attached)
It is currently available in these colours: Deep Blue, Aqua, Red, White, Lime Green and Gold
Bend it into any shape
As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from in our store
FEEL FREE TO CONTACT US, IF YOUR REQUIRED LENGTH ISN'T LISTED.
6cm or 10cm Diameter Round EL Panel
Here we have two separate items: either a 6cm or 10cm diameter circular EL Panel.
Ideal for backlighting dashboard gauges the EL Panel glows very brightly and can also be used for decoration or fancy-dress costumes
The Panel needs an Inverter/Driver to power it, and we have a choice of 4.2v, 6v, 9v and 12v drivers that are designed not to take up too much space if you are installing it as a backlight - or can be portable if it is for a costume.
Alternatively you can contact us with your needs, and we'll work out what would be best for you.
Currently, available in: Deep Blue, Green, Red, Light Blue, Pink or White
Please select which size of Round EL Panel you wish to purchase. Either in 6cm diameter or 10cm from the drop down menu below.
These EL Panels are really handy and can have so many uses. They run off any EL Driver and you can 'daisy chain' splitters to have as many as you want lit up.
This listing is for a versatile 5cm wide and 8cm long Electroluminescent Panel.
With a Driver, these glow very brightly making them ideal for the eye piece in masks.
The Panel itself is less than half a millimetre thick but is not see-through.
The Panels are £6 each
In the drop-down menu you can choose to have:
A Single 5cm x 8cm EL Panels with no Driver;
An EL Panel plus a 1xAAA battery Mini Driver (The 1xAAA driver could power 1 of these panels). Batteries not supplied;
An EL Panel plus a 2xAA battery Driver (the 2xAA driver could power 2 of these panels). Batteries not supplied;
An EL Panel plus a 8xAA battery Driver (the 8xAA driver could power 10 of these panels). Batteries not supplied;
An EL Panel plus a 9v battery Driver (the driver could power 2 of these panels);
An EL Panel plus a Mains Driver (the mains driver could power 10 of these panels and is available with a UK, EU or US plug);
An EL Panel plus a Mains and an 8xAA battery driver (the mains driver could power 10 of these panels);
An EL Panel plus a Rechargeable 3000mAh Li-ion battery. Due to airmail restrictions, these are only available in the UK;
An EL Panel plus a sound activated driver (this driver can power up to 7 of these panels and will allow your panel to glow when reacting to sound).
We have a large selection of inverters, EL Panels, EL Tapes and EL Wire.
Or contact a member of our team if you have questions.
The 5cm x 8cm are currently available in these colours:
Light Blue (Tron Blue), Red, Pink, Deep Pink, White, Orange, Grass Green and Deep Blue
EL Tape is an incredibly versatile material it can be bent and wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape
All our EL Wire and EL Tape has connectors attached so (with the right driver) it is just plug and play
Standard EL Tape with wires and connector
We have EL Panels and EL Tape in all sorts of shapes and sizes
Including animated and sound activated moving panels
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are also available in our store
EL Tape - 2cm x 25cm - Neon Glow Strip
This is for a 2cm wide and 25cm long Electro-Luminescent Tape.
Currently, in stock we have these colours: Light Blue (Tron Blue), Deep Blue, Red, Pink, Orange, Green and White
On the back of the EL Tape it has wires with connectors already attached:
EL Tape is an incredibly versatile material it can be wrapped around things.
To join it to a costume we recommend our ''sewable loop & stick-able-hook'' Velcro which allows you to sew one part of the Velcro to your costume while the stick pat goes on the back of this tape. The tape can then be removed from the costume to wash it
EL Tape can even have holes and shapes punched into it and be cut to your chosen shape
This Tape is also available in 12cm, 40cm and 1 metre lengths
The 2 x AA inverter can power two of these 25cm EL Tapes and the 8 x AA inverter can power just over 2 metres of EL Tape.