Sewable EL Wire - Easy Sew Tag @ £3.50 per metre
This handy item is a 2.3mm EL wire with sewable tag running along it; it is available in lengths of 50cm, 1m, 3m, 5m and 10 metre.
(EL wire needs a Driver to make it glow - available from £4 in the Inverter/Driver section of the website).
-
EL Wire twisted into a spiral
The wire is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green (being discontinued), Grass Green and White
Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector already attached and ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
By using splitters you can also connect different strands to the same Driver.
EL wire has loads of uses
It looks amazing when decorating the interior or exterior of cars and motorbikes and can be used inside and outside of your home and office and can even be threaded into clothes and hats.
Our Drivers can run many lengths of EL wire as long as the total length of the wire is under the Driver's maximum capacity
Cutting the wire into the length you choose is simple
LED emitters (3mm) with a choice of 6 vivid colours and power supply
These high quality LED emitters are super bright and even noticeably glow in daylight. They can be powered with a variety of our 12V power sources - just plug the power source in and let your creativity loose.
This LED emitter is compatible with 3mm diameter LED fibre optic lighting cable.
This very versatile light source is available in 6 vivid colours: Light Blue, Pink, Red, Orange, Green and White
You can join them together using our 12V LED power supply splitters.
3 way splitter for 12V LED power supply
LED's would usually need a controller, these have one already built in.
We have multiple power source options available:
1) Crocodile Clips
Perfect if you already have your own 12V battery to run these LED emitters.
2) 8 x AA Battery Box
This 8 x AA Battery Box will plug straight into the emitter. It is fairly large (127mm x 72mm x 19mm) but will make these LED emitters portable.
3) 3 x 18650 Rechargeable Battery Box
This 3 x 18650 Rechargeable Battery Box will plug straight into these LED emitters. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make the emitter portable.
4) Rechargeable Li-ion Battery
Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes
1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)
1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)
3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)
5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)
All of these Li-ion Batteries come with an intelligent recharger
5) Mains Powered
This handy PSU can be used to power these LED emitters off of Mains Electricity (UK, US or EU plugs are available)
6) Car Lighter Adaptor
This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories
This listing is for 1.5cm wide and 20cm long Electroluminescent Tape.
This EL Ribbon needs a small inverter to power it - Visit our shop to see a selection of inverters and other EL goodies.
The Colour glows a beautiful Light Blue (Tron Blue), White or Red.
As you can see from the picture it is divided into segments; the exact dimensions are:
The Strip itself is 1.5cm x 20cm
The Glowing section of it is actually 1.1cm wide
First there is a 1.1cm x 4.7cm glowing block
Then a 0.4cm x 1.5cm joining section
Next are two blocks of 1.1cm x 3.5cm
Joined by two 0.4cm x 1.5cm sections
Finishing with a 1.1cm x4.2cm block
The wire to connect it to an inverter is 23cm long and has a standard EL Connector on the end.
EL Tape is an incredibly versatile material as it can be bent and wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape.
It can be sliced into smaller strips similar to EL wire (as with EL Wire, rejoining it again needs some care and attention)
We also have EL Tape available in the following sizes: 2cm x 25cm / 2cm x 40cm and 2cm x 1 metre lengths
2.3mm diameter EL Wire @ £2.50 per metre
The 2.3mm diameter Electroluminescent wire is our cheapest standard EL Wire,
it is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green, Turquoise-Green and White
300 metre lengths are only available in Lime, Light Blue, Deep Blue, Red and WhiteWhite
2.3mm diameter EL Wire is available in the following lengths:
1 metre, 3 metre, 5 metre, 15 metre, 10 metre, 100 metre and 300 metre
(The 3.2mm diameter wire is also available in 10 metre and 25 metre lengths)
Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White.
The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector on it so is ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our store
We take custom orders for custom lengths of EL Wire.
This wire comes with a standard connector already attached so simply plugs into any EL Driver.
By using 'Splitters' you can also connect different strands to just one Driver
EL wire has loads of uses!
It has an amazing neon string effect when decorating the interior or exterior of cars and motorbikes and can be used inside and outside of the home and office and can even be threaded into clothes and hats
EL Tape - 1.5cm x 15cm of EL Glow Tape
This listing is for a 1.5 cm wide and 15cm long Electro-Luminescent Tape.
Currently, in stock we have these colours: Light Blue (Tron Blue), Deep Blue, Red, Pink, Orange, Green and White
On the back of the EL Tape it has wires with connectors already attached
This EL Tape needs an Inverter/Driver to make it glow
The drop down menu gives you the options to buy this item with a 2 x AA battery inverter, 1 x AAA mini driver or no driver.
EL Tape is an incredibly versatile material it can be wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape
This Tape is also available in 2cm x 12cm, 25cm, 40 cm and 1 metre lengths
GLOWING LETTERS EL Panel Alphabet
These glowing EL Letters are thinner than a credit card and glow amazingly bright
They have many uses from advertising signs or maybe you want an original way to have your kids names on a bedroom door
Each letter is just over 4cm high and just under 4cm wide
Here is the available letters we have:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
1 2 3 4 5 6 7 8 9 0
! ? £ $ @ +
Light Blue EL Letters
As these are made with EL Panels then they need an EL Driver to make them glow
You may already have an EL Driver and be adding these letters in which case you can choose 'NO DRIVER'
This set has the option of 6 different types of Driver
Mini Driver = for 1-6 EL Letters
Basic (2xAA) Driver = for 1-15 EL Letters
8xAA Driver= 10-50 EL Letters
Mains Driver = 10-50 EL Letters
Sound Activated Driver = 1-10 EL Letters
Sound Activated + Portable (8xAA) Driver = 25-50 EL Letters
Please choose how many EL Letters you want and your Driver selection in the drop down menu
We have a huge selection of different Drivers, Sound Activated and Sequencers in stock that will all work with these EL Letters
To work out which driver is best, you could consider each EL Letter is equal to around 25cm of EL Wire
e.g. if an EL Driver is rated for 1 metre of EL Wire, then it will power four EL Letters
White EL Letters
These EL letters are currently available in: White, Light Blue and Red
Please choose which colour you would like and how many letters you will need
You will have to send us a message with your choice of letters either by 'add a message' on the PayPal page when you make payment or click here to email us your choice.
However, many EL Letters you choose we will include a 'Splitter' to bring them all together to use with a single Driver.
Red EL Letters
EL Panels and Tapes are an incredibly versatile material that can be wrapped around things.
You can join loads of them together using 'Splitters' and it can even have holes and shapes punched into it and be cut into your chosen shapes.
3.2mm EL Wire @ £3 per metre
The 3.2mm EL Wire is favoured by makers as it is robust and its thickness offers protection while still having a bright neon effect. When placed on a costume or other project it keeps straight lines without showing kinks
It is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Grass Green, Turquoise-Green and White
Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED
- - - - - - - - - - - -
This wire comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver
By using splitters you can also connect different strands to the same driver
EL wire has loads of uses
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats
-
This wire can be cut into smaller lengths and attached to another inverter
Our inverters can run many strips of wire as long as the total length of the wire is under the inverters maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed
Joining tape and tubing for attaching EL Wire is available from this store
this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.
You will also definitely need some wire strippers.
You can happily use the joining tape and heat shrink tubing supplied for a decent join but if the joint is likely to encounter stress (e.g if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g behind a panel in a car) then we would advise soldering to avoid future hassle
It is a cliché to say you are only limited by your imagination but with this neon string it is true!!!
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours
We're sure you will be amazed - feel free to email or ring us with any questions
Basic EL Wire Set = 3 x 1 metre EL Wire + Driver
3 x 1 Metre of EL Wire, Splitter and Portable Driver for up to 5 metres of EL Wire.
This listing is for:
1) 3 x 1 metre of high quality (3.2mm) Electroluminescent Wire
2) 2 x AA portable Driver (with Flash)
3) Standard 3 way Splitter
The splitter lets you have 3 x 1 metre lengths of EL Wire attached to one driver/inverter - This gives you greater control and flexibility in the design of your costume.
4) 30 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine
The EL Wire can be any combination of these colours:
Light Blue, Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White
The 3.2mm diameter EL Wire is one of our brightest!
To make it easier to design your outfit, below are the dimensions of the inverters and lengths of connecting wires - there are also tips on how to create your costume.
POWER PACK / INVERTER (Driver)
The Power Pack takes 2 x AA batteries and has a built-in voltage inverter that 'inverts' the 3Volts from the batteries up to the 100Volts needed to make the EL Wire glow.
The power pack/inverter dimensions are: 9cm x 3.2cm x 2cm
It has the following controls: On / Flash / Strobe / Off
It has an 8cm wire coming out of it that leads to the...
SPLITTER: The Splitter is 40cm long in total; it is 20cm of wire which then splits into 3 separate strands which are all 20cm long and lead to the...
EL WIRE
There is then another 20-25cm from the connector until the actual glowing start of EL Wire - then there are 3 x 1 metre lengths of gorgeous glowing wire!
Its not complicated or fiddly
This set can turn some clothing into a Tron fancy dress in many ways:
1 metre goes down each arm and
1 metre for the front of the costume
OR
1 metre can go across the back and part way down the arm
1 metre to make a helmet
1 metre for the front of the costume
The whole kit is ready to use - just plug and play!
We have some crazy glowing masks & glasses that go well with this kit - take a look!
CHASING EL Wire 1.3mm - HALF PRICE (£ 2.50 p/m)
We are now making our standard Chasing EL Wire to be 2.3mm in diameter
So, lucky for you, we are getting rid of our old stock of 3.2mm and 1.3mm Chasing EL Wire and it is now HALF PRICE - at just £2.50 p/m (until stocks last)
This listing is for 1.3mm fine Electroluminescent glow wire with a chasing motion.
This Chasing 'Angel Hair' EL Wire is very bright and the chasing motion looks amazing
It flows in one continuous motion (it jumps a bit in this picture but that is just the video)
EL Chasing Wire
-
EL Chasing Wire
It is available in any of these colours:
Light Blue (Tron Blue), Lime Green, Deep Blue, White, Gold, Pink, Green, Red, Purple and Turquoise Green
The wire has a special connector on it so does not clip into standard EL Wire connectors and needs a Chasing EL Wire Driver (see drop down menu above)
This Chasing Wire is available in 1metre, 3metre and 5metre lengths as well as the thicker 3.2mm Chasing Wire
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available in our online store
EL wire has loads of uses!
It looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and office and can even be threaded into clothes and hats.
It is a cliché to say you are only limited by your imagination but with EL wire it is true!
If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours.
We're sure you will be amazed - feel free to message us with any questions you may have.
These tiny EL Panels are really handy and can have so many uses.
They run off any EL Driver and you can 'daisy chain' splitters to have as many as you want lit up.
The item we offer to you is a versatile 2.4cm wide and 4.5cm long Electroluminescent Panel.
This panel comes with 10.5cm's wire lead and 9cm's of super thin FFC tape that's even thinner that the panel for great flexibility.
With a driver, these glow very brightly making them ideal for the eye piece in masks.
The panel itself is less than half a millimetre thick but is not see-through.
White, Light Blue, Red or Green
EL Tape is an incredibly versatile material it can be bent and wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape.
All our EL Wire and EL Tape has connectors attached so (with the right driver) it is just plug and play
Standard EL Tape with wires and connector
We have EL Panels and EL Tape in all sorts of shapes and sizes
Including animated and sound activated moving panels!
These tiny EL Panels are really handy and can have so many uses. They run off any EL Driver and you can 'daisy chain' Splitters to have as many as you want lit up.
The item we offer to you is a versatile 3cm wide and 5cm long Electroluminescent Panel.
With a Driver, these glow very brightly making them ideal for the eye pieces in masks.
The panel itself is less than half a millimetre thick but is not see-through.
The Panels are £2.99 each
In the drop down menu you can choose to have:
Single 3cm x 5cm EL Panels
2 x Panels plus a 2 Way Splitter
2 x Panels plus a 2 Way Splitter and a 2xAA battery operated Driver / Inverter
4 x Panels plus a 4 Way Splitter
Or 4 x Panels, plus a 4 Way Splitter and a 2xAA battery operated Driver / Inverter.
Other inverters, EL Panels, EL Tapes and EL Wire are available in our online store.
Or feel free to contact us if you have any questions.
The 3cm x 5cm are currently available in these colours:
Light Blue (Tron Blue), Red, Pink, Deep Pink, White, Grass Green and Deep Blue
EL Tape is an incredibly versatile material it can be bent and wrapped around things and can even have holes and shapes punched into it and be cut to your chosen shapes.
All our EL Wire and EL Tape has connectors already attached so, (with the right Driver), it is just plug and play
Standard EL Tape with wires and connector
We have EL Panels and EL Tapes in all sorts of shapes and sizes, including animated and sound activated moving EL Panels!
EL Tape - 2cm x 12cm - Neon Glow Strip
This is for a 2cm wide and 12cm long Electro-Luminescent Tape.
Currently, in stock we have these colours: Light Blue (Tron Blue), Deep Blue, Red, Pink, Deep Pink, Orange, Yellow, Green and White
On the back of the EL Tape it has wires with connectors already attached:
EL Tape is an incredibly versatile material it can be wrapped around things.
To join it to a costume we recommend our ''''sewable loop & stick-able hook'''' Velcro which allows you to sew one part of the Velcro to your costume while the stick pat goes on the back of this tape. The tape can then be removed from the costume to wash it
EL Tape can even have holes and shapes punched into it and be cut to your chosen shape
This Tape is also available in 25cm, 40cm and 1 metre lengths
A 2 x AA inverter can power four of these 12cm EL Tapes and an 8 x AA inverter can power just over 2 metres of EL Tape.
EL Tape - 2cm by 12cm With Bend Half Way
This is a 2cm wide and 12cm long Electroluminescent Tape with a 45º bend in the middle available in:
Light Blue (Tron Blue), Deep Blue, Pink, Deep Pink, Red, Orange, Grass Green and White
This EL Curve has been designed to help you achieve a realistic Tron costume.
As you can see in the picture below it is perfectly suited for use with straight EL Tape and the EL Hoops
EL Tape, Curve and Hoop in the Tron Style
All our El Wire and Tape comes with wires and connectors attached
Like all EL Tape and EL Wire the EL Curve needs an Inverter/Driver to make it glow
On this EL Curve, the wires are connected in the middle of the bend so either end can be cut to a shape you need
Standard EL Tape with wires and connector
We also stock a wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories
The EL Curves have loads of other creative uses but are especially good for making realistic Tron costumes
The EL Curve is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration
We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.
If you want any help or advice in planning your EL costume feel free to get in touch
5mm THICK EL Wire @ £4 per metre
The 5mm EL Wire is the least brightest of different diameters of EL Wire, but is ideal for outdoor applications - Sunlight is not good for EL Wire and the thick coating on this wire protects it more.
Some people also prefer this thicker wire for its 'chunky neon cable' look but will not bend into the rightangles required for some letters of the alphabet.when you're making a faux neon sign.
The colours we have at present are:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green, Turquoise-Green and White
This 5mm thick EL wire is available in the following lengths: 10cm, 1 metre, 3 metre, 5 metre, 10 metre
This wire comes with a standard connector already attached so that it simply plugs into any EL Driver.
By using 'Splitters' you can also connect different strands to the same Driver.
EL wire has loads of uses!
It has an amazing neon string effect when decorating the interior or exterior of cars, can be used inside and outside of your home and office and can even be threaded into clothes and hats.
This wire comes as 'plug and play' but if you want to get more technical you can be cut into smaller lengths
Our EL inverters can run many lengths of wire as long as the total length of the wire is under the Driver/Inverters maximum capacity
With some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed
Joining tape and tubing for re-attaching the wire are available from this store
- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter
Cutting the wire into the length you choose is simple... but rejoining it takes care and attention so you will definitely need some wire strippers.
You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostled) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle
There are How-tos and a forum on the site to get some great tips
STIFF EL Wire 2.3mm @ £5 per metre
Stiff EL Wire lives up to its name as a mould-able, bendable wire suitable for making signs or shapes.
At 2.3mm in diameter, you will find while making patterns with this Stiff EL Wire, it will hold itself rigid when bent into its desired shape and is robust with a strong connector
The bend radius of Stiff EL Wire is 5mm which is the same as our standard EL Wire as is the breaking strain at 1kg
Pressure on the Stiff EL Wire should not be more than 1kg, this means it cannot be pinched too hard or trodden on
This Stiff EL Wire is unlike the standard EL Wire. The 1.0mm, MAXI and ULTRA also share this property, but because of a reinforced copper core, the Stiff EL Wire definitely holds its shape best.
Stiff EL Wire uses exactly the same splitters, drivers and sequencers as standard EL Wire
This remarkable bendy wire is £5 per metre and is available in 50cm, 1metre, 3metre, 5metre, 10metre and 25metre lengths (with connectors attached)
It is currently available in these colours: Deep Blue, Aqua, Red, White, Lime Green and Gold
Bend it into any shape
As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.
The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from in our store
FEEL FREE TO CONTACT US, IF YOUR REQUIRED LENGTH ISN'T LISTED.
6cm or 10cm Diameter Round EL Panel
Here we have two separate items: either a 6cm or 10cm diameter circular EL Panel.
Ideal for backlighting dashboard gauges the EL Panel glows very brightly and can also be used for decoration or fancy-dress costumes
The Panel needs an Inverter/Driver to power it, and we have a choice of 4.2v, 6v, 9v and 12v drivers that are designed not to take up too much space if you are installing it as a backlight - or can be portable if it is for a costume.
Alternatively you can contact us with your needs, and we'll work out what would be best for you.
Currently, available in: Deep Blue, Green, Red, Light Blue, Pink or White
Please select which size of Round EL Panel you wish to purchase. Either in 6cm diameter or 10cm from the drop down menu below.
