Cyber Punk 2077 glowing Samurai patch + driver + power pack
Cyber Punk 2077 glowing samurai
allows you to immerse yourself in the future with this amazing glowing patch. Fix it to the back of your clothing or your gaming chair and simply plug and play.
The Cyber Punk 2077 glowing samurai patch measures 26cm x 23cm and simply plugs into your preferred driver.
It is supplied with 39cm of velcro to easily attach and remove from clothing, since the patch is not washable. Simply sew one side of the Velcro to your clothing and stick the other side to the back of the patch.
If you want to fix the patch onto the back of a gaming chair, use some double-sided tape which is freely available on Ebay or your local DIY store.
All electroluminescent panels need a driver to make them glow. **Please note - DO NOT switch on the driver without first attaching a panel to it.** This item has a few options for you to choose from:
1) NO DRIVER
This is a great option if you already have your own driver you want to use.
Whatever your reason, this option gives you just the Samurai patch - without any driver or external power supplies like the rest of these listed below...
2) Basic Trigger Driver is needed to make the Samurai patch glow. It is powered by 2 x AA batteries (not supplied) and has an On/Off plunger switch, on the end of a 1.2m cable, that can run down the arm of the clothing and used to discreetly turn the glowing Samurai patch on and off.
3) Adaptable Trigger Driver with an 8 x AA battery box. These adaptable trigger drivers make the glowing Samurai patch glow the brightest. The driver's dimensions are 5.3cm x 3.4cm x 2.9cm and it weighs 61g. The battery box plugs straight into the driver. It is fairly large (127mm x 72mm x 19mm) and takes 8 x AA alkaline batteries (not supplied).
For portable uses, this allows the unit to be held on the body while the switch runs down the sleeve to the hand. The switch will latch on when fully pressed down, press for a second time and the switch will latch off.
4) Adaptable Trigger Driver with a 1000mAh Li-ion rechargeable battery pack and intelligent charger. These adaptable trigger drivers make the glowing Samurai patch glow the brightest. The driver's dimensions are 5.3cm x 3.4cm x 2.9cm and it weighs 61g. The Li-ion battery pack plugs straight into the driver.
Much smaller and lighter than the battery box, these powerful Li-ion batteries come with an intelligent charger. Its dimensions are 6.5cm x 3.7cm x 1.8cm and it weighs 81g.
*If you want more than one of the power connectors mentioned above for your EL Driver, they can all be found in our Accessories section, or just click the links in the descriptions you want and be taken to their own pages.*
May we present this versatile 10cm wide and 10cm long Electroluminescent Panel with a lit area of 9.4cm square.
The Panel needs a Driver/Inverter to power it, It is easiest to run the driver straight off the device you are backlighting.
These panels are currently available in these colours: Light Blue (Tron blue), Red, Grass Green and White
Contact us if you are not sure which driver you need, and we'll work out what would be best for you.
Installing an EL Panel as a backlight is fairly easy that basically involves accessing the screen of your device, cutting the EL Panel to the desired size, then wiring the driver so it is powered by the device, then finally putting it all back together.
There are plenty of walk-through videos showing step by step how to install an EL backlight
EL Tape is an incredibly versatile material it can be bent and wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape
We have EL Panels and EL Tape in all sorts of shapes and sizes including animated and sound activated moving panels.
May we present this versatile 13cm wide and 13cm long Electroluminescent Panel.
The Colour is Light Blue when on and White when off
or
White when On and Pink when Off.
The Panel needs a Driver/Inverter to power it - It is easiest to run the driver straight off the device you are backlighting.
There is an option to have this panel with a small waterproof Driver/Inverter and you have a choice of 4.5v, 6v, 9v and 12v drivers that are designed not to take up too much space.
Contact us with your needs if you are not sure which driver you need, and we'll work out what would be best for you.
Installing an EL Panel as a backlight is a fairly easy procedure that basically involves accessing the screen of your device, cutting the EL Panel to the desired size, then wiring the driver so it is powered by the device, then finally putting it all back together.
There are plenty of walk-through videos showing step by step how to install an EL backlight
-
EL Tape is an incredibly versatile material it can be bent and wrapped around things.
It can even have holes and shapes punched into it and be cut to your chosen shape
We have EL Panels and EL Tape in all sorts of shapes and sizes including animated and sound activated moving panels.
CHASING 2.3mm EL Wire - Motion Effect @ £5 per metre
This listing is for 2.3mm Electroluminescent glow wire with a chasing motion.
The chasing motion looks amazing - it flows in one continuous motion (it jumps a bit in this picture but that is just the video)
EL Chasing Wire
EL Chasing Wire
It is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Gold, Lime Green and Green
The wire has a special connector on it so does not clip into standard EL Wire connectors or drivers. It needs a Chasing EL Wire Driver (available in the drop-down menu above)
We are now stocking 'Splitters' for chasing El Wire if you would like 2 or 3 separate lengths from the same Driver
A wide selection of other EL Tapes, EL Wire, Sequencers, Drivers and helpful EL accessories are available in our online store
EL wire has loads of uses!
It looks amazing when decorating the interior or exterior of cars and motorbikes and it can be used inside and outside of the home and office and can even be threaded into clothes and hats.
It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!
If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.
We're sure you will be amazed - feel free to message us with any questions you may have and for any advice you may need for your EL projects.
A5 Cuttable EL Panel - Can be Cut Into Four Shapes
This is the latest breakthrough in helping people create their own glowing designs out of super-thin EL Panel - EL Panels are much thinner than a credit card (just 1/3mm thick) and glows beautifully.
This Cuttable A5 EL Panel is available in these colours:
White, Red, Light Blue and Green
To use this Panel, the first thing you must really think through is your design
If you have a pretty good idea what you want to make then you should decide whether you have to use this cuttable panel, or whether you can use one of our standard EL panels
If you simply have to have your EL shapes cut out then this cuttable panel is the thing for you
A5 cuttable EL Panel in Green
The shapes you cut will still need a driver/inverter to power them so you will need to decide on the best driver for you:
In the drop-down menu there is a choice of either mains powered and/or portable (8 x AA batteries) Driver. These are both capable of powering 400squ cm of EL Tape
Maybe the shapes you want to cut are tiny and you could use a smaller driver. In this case just choose NO DRIVER and, if you don't already have one, purchase a 2 x AA battery Driver here.
A 4 Way Splitter is also provided
There is a guide to cutting EL Panels in the tips section of our website:
How to Cut Electroluminescent Tape and Panels
EL Tape 5cm x 35cm single connector
This is a 5 cm wide and 35cm long strip of glowing Electroluminescent Tape.
It is ideal for using as an arm band for Detroit: Become Human cosplay
If needed, this EL Panel can be cut down to size using sharp scissors.
When cutting EL Tape or Panel it is best to use sharp scissors or craft knife and to seal the cut afterwards with glue and/or clear tape.
This EL Panel is available in Light Blue (Tron Blue) and White.
In the drop down menu, you'll have the option to buy the EL Tape with a powerful mains powered or portable Driver (8xAA batteries)
These Drivers are powerful enough to drive two of these EL Tapes in total and will make the Tape plug and play
There is a whole selection of drivers available at El Wire Craft that could power this EL Tape such as Sequencer or Sound Activated Drivers.
EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it.
This is a 2cm wide and 12cm long Electroluminescent Tape zigzag shape
Available in:
Light Blue (Tron Blue), and White.
All our El Wire and Tape comes with wires and connectors attached
Like all EL Tape and EL Wire the EL Zigzag needs an Inverter/Driver to make it glow
Standard EL Tape with wires and connector
We also stock a wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories
The EL Curves have loads of other creative uses but are especially good for making realistic Tron costumes
The EL Curve is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration
We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.
If you want any help or advice in planning your EL costume feel free to get in touch
Glowing Feather Party Mask
Complete the masked ball or festival look with these new EL Glowing masquerade Masks
This EL Mask has a beautiful green/blue pattern when off, yet comes to life when plugged into a driver making it great for parties, festival or masked balls, day or night
Of course, it needs an EL Driver to make it glow - The mask has a metre long power cable on it that ends in a standard EL Connector
NO DRIVER - choose this if you already have an EL Driver you can use to attach to the Mask
Basic Driver - This is our Basic 2xAA Driver that has button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver - This is a very small and discreet Driver that takes a single AAA battery
Of course as the EL Mask has a standard connector, you can use one of our splitters to run more wire, EL Tape or EL Shapes off the same driver, adding to look of your costume.
Glowing Carnival Party Mask
Complete the masked ball or festival look with these new EL glowing masquerade masks.
This EL Mask has a beautiful multicoloured pattern when off, yet comes to life when plugged into a driver making it great for parties, festival or masked balls, day or night
Of course, it needs an EL Driver to make it glow. The mask has a 1metre long power cable on it that ends in a standard EL Connector
NO DRIVER - choose this if you already have an EL Driver you can use to attach to the Mask
Basic Driver - This is our Basic 2xAA Driver that has button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver - This is a very small and discreet Driver that takes a single AAA battery
Of course as the EL Mask has a standard connector, you can use one of our splitters to run more wire, EL Tape or EL Shapes off the same driver, adding to look of your costume.
Complete the masked ball, party or festival look with these new EL Glowing masquerade Masks
This EL Mask has a beautiful blue/black pattern when off, yet comes to life when plugged into a driver making it great for parties, festivals or masked balls, day or night
Of course, it needs an EL Driver to make it glow - The mask has a metre long power cable on it that ends in a standard EL Connector
NO DRIVER - choose this if you already have an EL Driver you can use to attach to the Mask
Basic Driver - This is our basic 2 x AA driver that has button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver - This is a very small and discreet Driver that takes a single AAA battery
Of course as the EL Mask has a standard connector, you can use one of our splitters to run more wire, EL Tape or EL Shapes off the same driver, adding to look of your costume.
Glowing Stag Pattern Party Mask
Complete the masked ball or festival look with these new EL Glowing masquerade Masks
This EL Mask has a beautiful blue stag pattern when off, yet comes to life when plugged into a driver making it great for parties, festival or masked balls, day or night
Of course, it needs an EL Driver to make it glow - The mask has a metre long power cable on it that ends in a standard EL Connector
NO DRIVER - choose this if you already have an EL Driver you can use to attach to the Mask
Basic Driver - This is our Basic 2xAA Driver that has button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver - This is a very small and discreet Driver that takes a single AAA battery
Of course as the EL Mask has a standard connector, you can use one of our splitters to run more wire, EL Tape or EL Shapes off the same driver, adding to look of your costume.
Complete the festival look with these new EL Wire Shutter Glasses.
These glowing shades come with black or white frames and are without lenses making them great for parties and festivals, day or night
Of course, they need an EL Driver to make them glow - The EL Glasses have a metre long power cable on them that ends in a standard EL Connector.
NO DRIVER - choose this if you already have an EL Driver you can use to attach to the EL Glasses.
Basic Driver - This is our Basic 2xAA Driver that has button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver - This is a very small and discreet Driver that takes a single AAA battery.
As the EL Glasses have a standard connector already attached, you can use one of our Splitters to light up more wire or some EL Tape or EL Shapes from the same Driver. If it helps you plan, there is just over 50cm of EL Wire in these glasses.
They are currently available in any of these colours: Light Blue, Lime Green, Red and Pink
Shutter Glasses -Dual Colour
Complete the festival look with these new Dual Colour EL Shutter Glasses.
These flashing shades come with black or white frames and a choice of two EL Wire colours. They are without lenses making them great for parties and festivals, day or night.
Of course, they need an EL Driver to make them glow - The EL Glasses have a metre long power cable that ends in a standard EL Connector.
NO DRIVER - choose this if you already have an EL Driver you can use to attach to the EL Glasses.
Basic Driver - This is our Basic 2xAA Driver that has a button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver - This is a very small and discreet Driver that takes a single AAA battery.
Of course as the EL Glasses have a standard connector you can use one of our splitters to also run more wire or some EL Tape or EL Shapes off the same driver. If it helps you plan, there is just over 50cm of EL Wire in these glasses.
They are currently available in any of these colours: Light Blue, Lime Green, Red and Pink
Daft Punk Front EL Panels + Lapels + Driver
This set is what you need to replicate the glowing jackets used by Daft Punk
It has:
1) Two large EL Panels are just over 40cm long - replicas of the ones worn by Daft Punk.
These can either be worn both on the front, or one on the front and the other on the back
2) Zig-Zag Shapes for the lapels - these are 12cm long in total
3) Long 2 Way Splitter and 2 x Mini 2 Way Splitters
The Panels glow very brightly in Light Blue
4) The Driver that powers the two Panels is just 3cm x 4cm x 4cm and comes with an 8xAA Battery Box or a rechargeable Li-ion battery.
5) 1 metre of Velcro - sticky on one side and sewable on the other to help you attach the EL Tape and to a costume.
**RECHARGEABLE OPTION ONLY AVAILABLE TO UK - DUE TO EXPORT RESTRICTIONS**
The Driver is capable of powering more EL Tape or EL Wire if you want to add more parts from our online shop
We have some crazy glowing masks & glasses that go well with this kit - have a look!
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.
EL Glowing Ties - with Choice of Drivers
Here we have some amazing looking glowing ties
The ties are in 5 colours:
White, Black, Gold, Red, Deep Blue
The EL Wire outline is in a selection of colours and you can choose different colour wire to the colour of the tie:
Light Blue (Tron Blue), Deep Blue, Red, Yellow, Lime Green, Turquoise-Green and White
glowing EL Tie
Of course, they need an EL Driver to make them glow - The EL Ties have a 50cm long power cable on them that ends in a standard EL Connector
NO DRIVER = £6 - choose this if you already have an EL Driver you can use to attach to the EL Glasses, or if you want to use a different driver or sequencer
Basic Driver = £10 - This is our Basic 2 x AA driver which has a button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver = £12 - This is a very small and discreet Driver that takes a single AAA battery
Of course as the EL Glasses have a standard connector you can use one of our splitters to also run more wire or some EL Tape or EL Shapes off the same driver.
Or use a sequencer to make the EL Tie flash alongside other parts of your costume.
If it helps you plan part of a bigger EL Project, there is just over 60cm of EL Wire on the EL Tie