3cm x 1 metre DOUBLE ENDED EL Tape Cut to Make 2 Strips of Any Length

With this 'double ended' EL Tape you end up with two pieces of EL Wire for the price of one! - just cut it in half.

This is a 3cm wide and 1 metre long strip of Electro-Luminescent Tape.

*The full Glow area of the Tape is 2.3cm x 1 metre*

The EL Tape has a connector attached to BOTH ENDS:

This means it can be cut into two pieces of any length you choose.

A 2 Way Splitter is also provided so you can run both the EL Tapes from just one driver.

When cutting EL Tapes or Panels, it is best to use sharp scissors and to seal the cut afterwards with glue and/or clear nail varnish.

We stock the following colours:

Light Blue (Tron Blue), Red, Green, White and Deep Blue

In the drop down menu is also the option to buy the EL Tape with a powerful mains powered or portable Driver (8xAA batteries)

These Drivers are powerful enough to drive about 1 1/2 metre of this (3cm x 1metre) EL Tape in total and will make the Tape plug and play

(If it is more convenient to have a car-lighter attachment instead of the 8xAA Battery Box to power this driver please let us know)

There is a whole selection of Drivers available at EL Wire Craft that could power this EL Tape such as Sequencer or Sound Activated Drivers.

EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it.

EL Tape 5cm x 35cm single connector

This is a 5 cm wide and 35cm long strip of glowing Electroluminescent Tape.

It is ideal for using as an arm band for Detroit: Become Human cosplay

If needed, this EL Panel can be cut down to size using sharp scissors.

When cutting EL Tape or Panel it is best to use sharp scissors or craft knife and to seal the cut afterwards with glue and/or clear tape.

This EL Panel is available in Light Blue (Tron Blue) and White.

In the drop down menu, you'll have the option to buy the EL Tape with a powerful mains powered or portable Driver (8xAA batteries)

These Drivers are powerful enough to drive two of these EL Tapes in total and will make the Tape plug and play

There is a whole selection of drivers available at El Wire Craft that could power this EL Tape such as Sequencer or Sound Activated Drivers.

EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it.

GLOWING STICKGIRL SET = 7.5 metres EL Wire + Driver

Turn yourself into a glowing stickgirl!

This set is for a 'plug and play' EL Wire and Driver - but you have to attach it to a costume

*see the diagram below for a suggested setup*

With the set you get:

1) 3 pieces of 1 metre 3.2mm EL Wire

2) 1 piece of 3 metre 3.2mm EL Wire

3) 3 pieces of 50cm 3.2mm EL Wire

4) An EL Driver with either an 8 x AA Power Pack (batteries not supplied) or a rechargeable 3000mAh Li-ion battery (only available in the UK due to airmail postal restrictions)

This driver is powerful enough to glow up to 15 metres of EL Wire

5) 1 x mini 3-way splitter, 1 x standard 3-way splitter, 1 x long 3-way splitter and 1 x 50cm extender

By 'daisy chaining' the splitters you can have all 9 metres of EL Wire attached to this one driver/inverter

6) 50 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

The EL Wire can be any combination of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White

The whole kit is ready to use - just plug and play!

Here is the suggested layout - the EL Wire is recommended to run all round the hem of a dress

Dimensions of the products:

If you are making a costume, it is important to plan it out properly.

For this glowing girl set, the driver is very powerful and so it comes with a choice of two different power packs.

So here are the dimensions of all the parts plus lengths of wire between them.

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 12.7cm x 7.02cm x 1.9cm and has a 21cm thin power wire coming out of it that leads to the driver

A 3000mAh rechargeable Li-ion battery which weighs 172g and is 7.3cm x 5.6cm x 2.2cm. This option comes with a 1A intelligent charger. Due to airmail restrictions this is option is only available for UK delivery.

THE DRIVER

The driver is 5.4cm x 3.4cm x 2.9cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The Splitters are 40cm long in total,

it is 20cm of wire which then splits into 3 separate strands which are all 20cm long

The first has 3 channels and this splits off and lead to the...

EL WIRE

3 x 1 metre for the body

1 x 3 metres is for the skirt

3 x 50cm for the head - - This is the really fun part of designing the expression on the face of your stick man/girl

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set

The stickguys and stickgals in these pictures were designed by international party animal Jak Hammer and his amigos!
We have some crazy glowing masks & glasses that go well with this kit - take a look!

The whole kit is ready to use - just plug and play!

CHASING EL Wire Set - 3 x 1 Metre of Chasing EL Wire + Driver

This 'Chasing' EL Driver is 9cm x 3.5cm x 2.3cm and takes 2 x AA batteries - batteries not supplied.

'Chasing' 3 Way Splitter - this is designed only to be used with chasing EL Wire and will not work with standard EL Wire

3 x 1 metres of Electroluminescent Wire with a chasing motion.

This Chasing EL Wire is very bright and the chasing motion looks amazing

The 3 Chasing wires can be placed in different parts of the body to give an amazing effect.

3 x 1m Chasing EL Wire, using just one Driver

EL Chasing Wire

It is available in any combination of these colours:

Light Blue (Tron Blue), Pink, Orange, Lime Green and Green

The wire has a special connector on it so does not clip into standard EL Wire connectors and needs a Chasing EL Wire Driver and special Chasing Splitter

This Chasing Wire is also available in 50cm, 1m, 3m, 5m and 10metre lengths.

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats.

It is a cliché to say you are only limited by your imagination but with EL wire it is true.

If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions you may have.

Driver for up to 3 metres CHASING EL Wire (2 x AA)

Here we have a driver specifically for Chasing EL Wire that will not connect or light up standard EL Wire.

This small portable unit will light up to 3 metres of chasing EL wire or 1 metre of Ultra Chasing Wire.

(We currently stock 50cm, 1m and 3m lengths of chasing EL Wire and 2-way and 3-way splitters for CHASING EL Wire)

The driver has a push button which clicks between Continuous Chasing - OFF

Its dimensions are:9cm x 3cm x 2cm (L x W x H)

EL Wire has loads of uses!

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats.

It is a cliché to say you are only limited by your imagination but with EL wire it is true!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions you may have.

38cm x 40cm White EL Panel - Matt Coating

Here we have Continuous Lighting for a Photography Studio or Light Box.

This large EL Panel can be used as a base to take photographs and will help reduce shadows by up-lighting the item.

The EL Panel is lightweight and only 1/3mm thick.

It is powered by a silent, mains powered EL Driver that is 13cm x 7cm x 3cm and weighs 150gms.

When it is switched off the panel is a light pink colour but when on it glows brightly at around 80 cd/sq metre

The size of the unit has been designed to fit inside standard foldable light box or light tent kits.

- - - - - - - - -

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.

6cm EL Hoop - Glowing Disc of EL Tape

Here we have a glowing hoop of Electro-Luminescent Tape 6cm wide available in Light Blue (Tron Blue), Deep Blue, Pink, Red, Orange, Yellow, Grass Green and White

The hoop needs an Inverter/Driver to make it glow

There is an option within the drop down menu to include a mini 1xAAA or standard 2 x AA battery driver with your purchase.

EL Hoop with some EL Tape in the Tron Style

If you want to link hoops together it is possible to make a single complete cut through the hoop and it will still continue to glow!

The EL Hoops have loads of creative uses but are especially good for making realistic Tron costumes

The EL Hoop is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration.

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

Enclosed Battery Box (8 x AA) - 12V PORTABLE POWER PACK

This handy item is an enclosed battery box that takes 8 x AA batteries (batteries not supplied) and gives an output of 12v.

*Please note this is just a battery box, IT IS NOT AN EL DRIVER/INVERTER. They are available as a power supply for our EL Drivers or EL Sequencers.*

The size of this power pack is:

127mm x 72mm x 19mm and the lead for the output is 17cm long with a 2.1mm/5.5mm plug on the end.

This is a useful item for when you need to power a 12v appliance that you want to make portable

REMEMBER:

Standard alkaline batteries are 1.5v each, so 8 of them will make 12v, however rechargeable batteries are only1.2v each, so 8 of them in this battery pack will only produce 9.6v.

- - - - - - - - - - - - - - - - - -

These battery packs are used to power powerful driver/inverters for EL wire

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

3 x 18650 Battery Box

This handy item is a battery box that takes 3 x 18650 batteries and gives an output of just under 12V

*Please note this is just a battery box IT IS NOT AN EL DRIVER/INVERTER. They are available as a power supply for our EL Drivers or EL Sequencers.*

18650 batteries are the long round flat ended rechargeable 'INR' or 'IMR' batteries which have become popular since they are used in vaping rigs.

We have made this battery box to power the 12v EL Drivers and Sequencers,

The 18650 batteries are 3.7v each, so the power input from this Battery Box with 3 is a total of 11.1V

We have found this barely makes a difference when powering EL Drivers compared to the convenience of these rechargeable batteries

This Battery Box comes with a standard 2.1mm/5.5mm connector

The size of the Battery Box power pack is 76mm x 60mm x 19mm and the output lead is 250mm long.

- - - - - - - - - - - - - - - - - -

These battery packs are used to power powerful driver/inverters for EL wire

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Dinner Jacket Suit EL Panels + Driver

This is a classy set if you want to turn a dinner jacket into a startling and unmissable work of art

It has:

1) Two large EL Panels are 37 cm long and 7cm at the wides part of the lapel

2) Zig-Zag Shapes for the shoulders - these are 12cm long in total

3) Long 2-way splitter and 2 x mini 2-way splitters

The Panels glow very brightly in Light Blue colour

4) The driver that powers the two Panels is just 3cm x 4cm x4cm and has an 8 x AA battery box or a rechargeable Li-ion Battery option.

5) 1m Velcro - sticky on one side and sewable on the other to help you attach the EL panel to a costume.

**RECHARGEABLE OPTION ONLY AVAILABLE TO UK - DUE TO EXPORT RESTRICTIONS**

The Driver is capable of powering more EL Tape or EL Wire if you want to add more parts from our online shop

- - - - - - - - -

We have some crazy glowing ties & glasses that go well with this kit - take a look!

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.

EL Tape Bullseye! 6cm EL Hoop with 3cm EL Button

The EL Bullseye is an EL Hoop with an EL Button fitted exactly inside it.

The EL Button can pop in and out of the Hoop making them interchangeable.

The hoops and the buttons are available in a variety of colours:

Light Blue (Tron Blue), Deep Blue, White, Red, Green and Orange

Light Blue EL Bullseye and EL Button

As you can see in the picture below it is perfectly suited for use with straight EL Tape and the EL Hoops and EL Buttons are available separately in our online store.

EL Bullseye, EL Hoop and EL Button

The EL Hoop and the EL Button already have wires and connectors attached - with this set we supply a 2-way-splitter to bring these two together

All our El Wire and Tape comes with wires and connectors already attached making it simply plug-and-play

Standard EL Tape with wires and connector

The EL Hoops and EL Buttons have loads of other creative uses but are especially good for making realistic Tron costumes.

They are made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration.

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

12V Rechargeable 5000mAh Li-ion Battery for EL Driver and LED

This battery pack has been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

While trying out different battery systems we found that many of them exaggerated the milliamp/Hour ratings, these batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

The battery pack weight and dimensions are: 265g and (6.0cm x 5.8cm x 3.9cm)

Input power is 12.6V DC with an output of 12V DC. There is an over-charge / discharge protection.

The intelligent 1A Li-ion charger (supplied as standard) has a UK plug. It is recommended these Li-ion batteries are best charged with these chargers

12V Rechargeable Li-ion batteries & chargers

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

Whilst trying out different battery systems, we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

We have these batteries in five different sizes with the following weights and dimensions:

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (Square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

15Ah: 725g (14.0cm x 6.5cm x 4.7cm)

SPECS:

Capacity: 1000mAh, 1800mAh, 3000mAh or 5000mAh

Input power: DC 12.6V

Output: DC 12V

Over-charge / discharge protection: Yes

These Li-ion batteries are best charged with dedicated Li-ion Intelligent Chargers

The 15Ah has an overcharge protection up to 15A so can take a larger current draw

AC Mains intelligent chargers come with UK plugs and are available in a choice of:

No Charger - if you already have your own intelligent Li-ion battery charger

1A Charger - This will charge the Li-ion batteries at a max of 1A per hour

2A Charger - This will charge the Li-ion batteries at a max of 2A per hour

EL Button - 3cm diameter circle

For Detroit:Become Human, please check out our newest 2cm small EL Hoop.

https://elwirecraft.co.uk/product/2cm-round-hoop-flat-el-panel-detroit-become-human-style/

Here we have a 3cm diameter circle of Electro-Luminescent Tape available in Light Blue (Tron Blue), Pink, Red, Orange,Yellow, Grass Green and White

This EL Button has been designed to help you achieve a realistic Tron costume.

3 EL Buttons in a row

Like all EL Tape and EL Wire, the EL Buttons need an Inverter/Driver to make it glow - you have the option in the drop-down menu, to buy these hoops with a 2 x AA battery Driver - there is a bigger selection in our online store including 'Splitters' so that you could have up to 10 of them attached to a single Driver.

Standard EL Tape with wires and connector

The EL Buttons have loads of other creative uses but are especially good for making realistic Tron costumes

The EL Button is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration

We have a whole range of EL Wire, EL Tape, EL Panels and many types of Driver/Inverters are also available.

If you want any help or advice in planning your EL costume, please contact us and speak to a member of our team.

EL Tape TRON SET = 2 x 25cm Tape + EL Hoops + Driver

This amazing kit contains just what you need for a great glowing Tron costume:

1) 2 pieces of 2cm x 25cm EL Tape

2) 2 pieces 6cm EL Hoops

3) 4 Way Black Splitter

4) Powerful portable Driver/Inverter powered by 8xAA batteries (not supplied) or rechargeable Li-ion battery.

5) It also comes with just over 50cm of Velcro - sticky on one side and sewable on the other to help you attach the El Tape and EL Hoops to a costume.

The EL Tape and EL Hoops can be any combination of these colours:

Light Blue (Tron Blue), Deep Blue, Pink, Green, Orange, and White

The whole kit is ready to use - add batteries and plug and play!

Dimensions of the products:

If you are making a costume, it is a good idea to plan it out properly.

So here are the dimensions of all the parts plus lengths of wire between them:

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 6.5cm x 6cm x 3cm

it has a 65cm thin power wire coming out of it that leads to the...

DRIVER

The driver is 6cm x 4cm x 4cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The 4 Way Splitter is 40cm long in total,

it is 20cm of wire which then splits into 4 separate strands which are all 20cm long and lead to the...

EL TAPE

The EL Tape has a 20cm wire on it before 25cm of glorious glowing EL Tape

The tape is just 350 microns thick - that is 1/3rd of a millimetre!

Sticky back Velcro is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky

You must sew the other part of the Velcro onto the costume making it very convenient to attach and remove

Of course, you don't need to use the Velcro and fix it any way you choose

EL HOOPS

Two channels of the Splitter lead to these glowing discs of EL Tape that give your costume and authentic Tron look

Its not complicated or fiddly - we've just given all those details if you want to plan your costume before you buy the set - feel free to message us if you have any questions.

OR CONTACT US IF YOU WANT ADVICE PLANNING YOUR SET

We have some crazy glowing masks & glasses that go well with this kit - take a look!

This EL Tape comes with a standard connector so simply plugs into any EL inverter - this makes it easy to change between coloured wire on one inverter.

By using splitters you can also connect different strands to the same Inverter / Driver

USB Rechargeable 3000mAh Li-ion Battery

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

(*Li-ion Batteries are only available to the UK due to airmail postal restrictions)

These Rechargeable Batteries have been designed to work with our USB EL Drivers

but will supply power to any device that has a USB input

These Li-ion Batteries can recharged using any USB port.

This battery back weighs 74 grams and is 71mm x 44mm x 8mm (L x W x H).

SPECS:

Capacity: 3000mAh

Input power: DC 5.2V

Output: DC 4.5V - 5.2V

Over-charge / discharge protection: Yes