EL Tape Bullseye! 6cm EL Hoop with 3cm EL Button

The EL Bullseye is an EL Hoop with an EL Button fitted exactly inside it.

The EL Button can pop in and out of the Hoop making them interchangeable.

The hoops and the buttons are available in a variety of colours:

Light Blue (Tron Blue), Deep Blue, White, Red, Green and Orange

Light Blue EL Bullseye and EL Button

As you can see in the picture below it is perfectly suited for use with straight EL Tape and the EL Hoops and EL Buttons are available separately in our online store.

EL Bullseye, EL Hoop and EL Button

The EL Hoop and the EL Button already have wires and connectors attached - with this set we supply a 2-way-splitter to bring these two together

All our El Wire and Tape comes with wires and connectors already attached making it simply plug-and-play

Standard EL Tape with wires and connector

The EL Hoops and EL Buttons have loads of other creative uses but are especially good for making realistic Tron costumes.

They are made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration.

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

Adaptable Driver for 5-15m EL Wire - Flashing Option

This handy item is a 12v driver with a variety of power inputs that will run between 5 and 15 metres of EL Wire.

The Driver has a switch on the side with 3 different positions Off - Flash - Continuous On.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12V etc)

The size of the Driver is: 5.4cm x 3.4cm x 2.9cm and weighs 61g.

Using splitters, this Driver can run as many strands as you like as long as the total is under 15 metres.

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (127mm x 72mm x 19mm) but will make this EL Driver portable.

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or EU plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

You can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver.

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once.

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver

EL wire has loads of uses!

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

EL Button - 3cm diameter circle

For Detroit:Become Human, please check out our newest 2cm small EL Hoop.

https://elwirecraft.co.uk/product/2cm-round-hoop-flat-el-panel-detroit-become-human-style/

Here we have a 3cm diameter circle of Electro-Luminescent Tape available in Light Blue (Tron Blue), Pink, Red, Orange,Yellow, Grass Green and White

This EL Button has been designed to help you achieve a realistic Tron costume.

3 EL Buttons in a row

Like all EL Tape and EL Wire, the EL Buttons need an Inverter/Driver to make it glow - you have the option in the drop-down menu, to buy these hoops with a 2 x AA battery Driver - there is a bigger selection in our online store including 'Splitters' so that you could have up to 10 of them attached to a single Driver.

Standard EL Tape with wires and connector

The EL Buttons have loads of other creative uses but are especially good for making realistic Tron costumes

The EL Button is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration

We have a whole range of EL Wire, EL Tape, EL Panels and many types of Driver/Inverters are also available.

If you want any help or advice in planning your EL costume, please contact us and speak to a member of our team.

EL Tape Tron Identity Disc (14cm diameter)

This is a 14cm diameter Electro-Luminescent circular EL Panel available in Light Blue (Tron Blue), White, Orange, Red and Deep Blue

This EL Disc has been designed to help you achieve a realistic Tron costume by using as an Identity Disc on the back of the costume.

It needs a Driver to make it glow

The 2xAA Driver can light up this EL Disc.

The Powerful Portable 8xAA Driver will power this EL Disc PLUS another 2 pieces of 2cm x 1m EL Tapes.

Other Driver/Inverters and glowing EL parts of Tron costumes are available in our online store.

A White El Disc

All our El Wire, Tapes and Panels come with wires and connectors already attached.

Standard EL Tape with wires and connector

These EL Discs have loads of other creative uses but are especially good for making realistic Tron costumes.

The EL Disc is made from EL Panel which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costumes or even a wall for decoration.

We have a whole range of EL Wire, EL Tape s and EL Panels and many types of Drivers / Inverters are also available.

If you would like any help or advice in planning your EL costume, please email us.

EL Tape Tron Sacral Piece

This EL Tape has been designed to be worn down the base of the spine for a realistic Tron Costume.

The beautiful 'Tron Circuit' style can be worn on any part of the body to create an amazing effect.

The piece is 18cm tall and 9cm wide and available in these colours:

Light Blue (Tron Blue), White and Orange

The EL Tape needs a Driver to make it glow

The Powerful Portable 8xAA Driver can power up to ten of these pieces.

Other Driver/Inverters and glowing EL parts of Tron costumes are available in our store.

All our El Wire and Tape comes with wires and connectors attached

Standard EL Tape with wires and connector

This EL Panel has loads of other creative uses but are especially good for making realistic Tron costumes

It is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

EL Tape TRON SET = 2 x 25cm Tape + EL Hoops + Driver

This amazing kit contains just what you need for a great glowing Tron costume:

1) 2 pieces of 2cm x 25cm EL Tape

2) 2 pieces 6cm EL Hoops

3) 4 Way Black Splitter

4) Powerful portable Driver/Inverter powered by 8xAA batteries (not supplied) or rechargeable Li-ion battery.

5) It also comes with just over 50cm of Velcro - sticky on one side and sewable on the other to help you attach the El Tape and EL Hoops to a costume.

The EL Tape and EL Hoops can be any combination of these colours:

Light Blue (Tron Blue), Deep Blue, Pink, Green, Orange, and White

The whole kit is ready to use - add batteries and plug and play!

Dimensions of the products:

If you are making a costume, it is a good idea to plan it out properly.

So here are the dimensions of all the parts plus lengths of wire between them:

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 6.5cm x 6cm x 3cm

it has a 65cm thin power wire coming out of it that leads to the...

DRIVER

The driver is 6cm x 4cm x 4cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The 4 Way Splitter is 40cm long in total,

it is 20cm of wire which then splits into 4 separate strands which are all 20cm long and lead to the...

EL TAPE

The EL Tape has a 20cm wire on it before 25cm of glorious glowing EL Tape

The tape is just 350 microns thick - that is 1/3rd of a millimetre!

Sticky back Velcro is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky

You must sew the other part of the Velcro onto the costume making it very convenient to attach and remove

Of course, you don't need to use the Velcro and fix it any way you choose

EL HOOPS

Two channels of the Splitter lead to these glowing discs of EL Tape that give your costume and authentic Tron look

Its not complicated or fiddly - we've just given all those details if you want to plan your costume before you buy the set - feel free to message us if you have any questions.

OR CONTACT US IF YOU WANT ADVICE PLANNING YOUR SET

We have some crazy glowing masks & glasses that go well with this kit - take a look!

This EL Tape comes with a standard connector so simply plugs into any EL inverter - this makes it easy to change between coloured wire on one inverter.

By using splitters you can also connect different strands to the same Inverter / Driver

EL Tape Tron Boot Piece

This EL Tape has been designed to be worn down the ankle and wrap around a boot for a realistic Tron Costume.

The beautiful 'Tron Circuit' style can be worn on any part of the body to create an amazing effect.

The piece is 32cm high and 22cm wide and is currently only available in: Orange

It needs a Driver to make it glow

The Powerful Portable 8xAA Driver can power up to four of these pieces

All our El Wire and Tape comes with wires and connectors attached

Standard EL Tape with wires and connector

This EL Panel has loads of other creative uses but are especially good for making realistic Tron costumes.

It is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

EL Tape TRON SET = 2 x 40cm EL Tape + EL Hoops + EL Wire + Driver

This amazing item consists of:

1) 2 pieces of 2cm x 40cm EL Tape,

2) 4 x 6cm EL Hoops,

3) 2 pieces of 1m x 1.5mm EL Wire,

4) 2 x 4-way splitters and a 2-way splitter,

5) and a powerful portable Driver/Inverter with either an 8xAA battery box (batteries not supplied) or a 3000mAh rechargeable Li-ion battery (only available in the UK due to airmail postal restrictions),

6) It also comes with 80cm of Velcro - sticky on one side and sewable on the other to help you attach the tape and hoops to a costume

The EL Wire can be any combination of these colours:

Light Blue (Tron Blue), White and Orange

The whole kit is ready to use - just plug and play!

Dimensions of the products:

If you are making a costume, it is a good idea to plan it out properly.

For this set, the driver is very powerful and comes with a separate power pack.

So here are the dimensions of all the parts plus lengths of wire between them.

Feel free to message us if you have any questions.

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 6.5cm x 6cm x 3cm

it has a 65cm thin power wire coming out of it that leads to the...

DRIVER

The driver is 6cm x 4cm x 4cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The Splitter is 40cm long in total,

it is 20cm of wire which then splits into 3 separate strands which are all 20cm long - 2 of them then lead to...

2 x EL TAPE

The EL Tape has a metre of wire on it before the 2cm X 40cm super-bright glow of the EL Tape

The tape is just 350 microns thick - that is 1/3rd of a millimetre!

Sticky back Velcro is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky

You must sew the other part of the Velcro onto the costume making it very convenient to attach and remove

Of course, you don't need to use the Velcro and can fix it any way you choose

EL HOOPS

Two channels of the splitter lead to these glowing discs of EL Tape onto the shoulders

These 6cm diameter hoops also come with sticky back Velcro discs to attach them to your costume

EL WIRE

This thin but very bright EL Wire gives an amazing effect as it runs from the hoop near the collar, over the shoulder, down the back and round the waist where it meets the other EL Hoop

SPLITTERS

This is how we recommend using the splitters:
The end connector from both 40cm tapes, and the two 'collar' Hoops all connect to a 4-way splitter

The connectors from the Hoops on the waist and the end of the angel hair wire all connect up to a 4-way splitter

The 4-way splitters then connect up to the 2-way splitter and that connects to the driver - simple! 😉

Its not complicated or fiddly - we've just given all those details if you want to plan your costume before you buy the set - feel free to message us if you have any questions.

The whole kit is ready to use - just plug and play!

We have some crazy glowing masks & glasses that go well with this kit - take a look!

- - - - - - - - - - - -

This El Tape comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one inverter

By using splitters you can also connect different strands to the same driver.

Splitter for 2.1mm/5.5mm 12V LED power supply - use 1 power supply

Here we have splitters for a 2.1mm/5.5mm 12v LED power supply.

This is extremely useful if you have multiple LED emitters, light sources or drivers that you want to run off a single power supply.

The total length of the splitter is 400mm with 190mm before the split.

These splitters are available in:

2 way (useful for powering 2 x LED emitters from 1 x power supply),

3 way (useful for powering 3 x LED emitters from 1 x power supply),

4 way (for powering 4 x LED emitters from 1 x power supply),

5 way (for powering 5 x LED light sources from 1 x power supply),

6 way (for powering 6 x LED light sources from 1 x power supply) and

8 way (for powering 8 x LED light sources from 1 x power supply).

Please select your preferred option from the drop down menu.

Feel free to message us with any questions.

Splitter For 2.1mm/5.5mm 12v power supply

This is a 2 Way 12v Splitter for a 2.1mm/5.5mm 12v Input

This is useful if you have two 12v Drivers that you want to power from a single power input.

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats.

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions you may have.

Splitter for 2.1mm/5.5mm 12V power supply - use 1 power supply

Here we have splitters for a 2.1mm/5.5mm 12v power supply.

This is extremely useful if you have multiple EL drivers that you want to run off a single power supply.

The total length of the splitter is 400mm with 190mm before the split.

These splitters are available in:

2 way (useful for powering 2 x EL drivers from 1 x power supply),

3 way (useful for powering 3 x EL drivers from 1 x power supply),

4 way (for powering 4 x EL drivers from 1 x power supply),

5 way (for powering 5 x EL drivers from 1 x power supply),

6 way (for powering 6 x EL drivers from 1 x power supply) and

8 way (for powering 8 x EL drivers from 1 x power supply).

Please select your preferred option from the drop down menu.

Feel free to message us with any questions.

Car Lighter Attachment for EL Wire inverter

This is a fused Car Lighter Attachment that plugs in to a 2.1mm/5.5mm Jack Plug, making it suitable for powering any of our 12v EL Drivers

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire, have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Angled Shape for Tron Costume 40cm

These 2cm x 40cm angled EL Tapes are made for the legs of our Tron Costumes, Sam Flynn, Quorra and Gem.
It can also be used on other parts of a costume such as the back, arms or neck. EL Tape glows brightly and looks really striking. This piece is available in Light Blue (Tron Blue)

If you are making a costume it is a good idea to plan it out properly.This EL Tape is available with or without a Driver

The EL Tape is angled so is 37 cm from top to tail - and traditionally was designed to go on the leg of our Tron costume but can be used anywhere.The EL Tape is just 350 microns thick - that is 1/3rd of a millimetre!

If you order two pieces with a Driver, you will also receive a 2 Way Splitter, free of charge.

The Driver that is offered is a powerful 8 x AA battery portable Driver/Inverter, capable of powering 6 pieces of this EL Tape.

If it is to be part of a larger EL project then you would be better off with a more powerful Driver and some Splitters - there is a selection available in our online store.

All our EL Wire and EL Tape has connectors already attached so (with the right Driver) it is just plug and play!

Standard EL Tape with wires and connector

This EL Shape is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration.

Curved Shape for Tron Costume 40cm

This is a 2cm x 40cm piece of EL Tape curved to go round the ID Disc and over the shoulder
It can also be used on other parts of a costume such as the legs, arm or neck EL Tape glows brightly and looks really striking. This piece is available in Light Blue (Tron Blue)

Dimensions of the products:
If you are making a costume it is a good idea to plan it out properly.
This EL Tape is available with or without a powerful driver
2cm x 40cm Curved Outline
The EL Tape is curved so is 37 cm from top to tail - it has been designed to go on the back round the ID disc and curve over the shoulder

The tape is just 350 microns thick - that is 1/3rd of a millimetre!

If you order two pieces then it will come with a free 2-way splitter

The Driver that is offered is a powerful 8 x AA battery portable Driver/Inverter, capable of powering 6 pieces of this EL Tape

If it is to be part of a larger EL project then you would be better off with a more powerful driver and some splitters - there is a selection available in our online store.

All our EL Wire and EL Tape has a connectors attached so (with the right driver) it is just plug and play!

Standard EL Tape with wires and connector

Glowing Pentacle Made From EL Tape

Here we have a 10cm diameter circle of Electroluminescent Tape with a 3-D Pentagram inside available in Deep Blue, White and Light Blue (Tron Blue)

Like all EL Tape and EL Wire this EL Shape needs an Inverter/Driver to make it glow - there is an option to have one supplied in the drop down menu below.

If it is to be part of a larger EL project then you would be better off with a more powerful driver and some splitters - there is a selection available in our online store.

All our EL Wire and EL Tape has a connectors attached so (with the right driver) it is just plug and play!

Standard EL Tape with wires and connector

This EL Pentacle is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration.

Crocodile Clips Attached to a 2.1mm/5.5mm Jack Plug

These are simply crocodile clips attached to a 2.1mm/5.5mm Jack Plug, to allow you to power off of an external 12v Battery

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.