Extension For 2.1mm/5.5mm 12v Input

This is a 1 metre extension for a 2.1mm/5.5mm 12v input.

This is useful if you have to increase the distance between the power supply and Driver.

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL Wire has loads of uses"

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats.

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions you may have.

T-Square Shape for Rinzler

This T Square EL Panel is ideal for a Tron Rinzler Costume

The T square glows brightly and is 8cm long and 5cm tall

Each of the cells are 1.7 cm square

The shape is available in White or Orange and has been designed to help you achieve a realistic Tron costume.

As you can see in the picture below it is perfectly suited for use with straight EL Tape and the EL Hoops

Like all EL Tape and EL Wire the EL T- Square needs an EL Driver to make it glow - there is a selection available

EL Tape, Curve and Hoop in the Tron Style

All our El Wire and Tape comes with wires and connectors attached

Like all EL Tape and EL Wire the EL Curve needs an EL Driver to make it glow - there is a selection available in our online store.

On this EL Curve, the wires are connected in the middle of the bend so either end can be cut to a shape you need.

Standard EL Tape with wires and connector

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.

The EL Curves have loads of other creative uses but are especially good for making realistic Tron costumes.

The EL Curve is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to a costume or even a wall for decoration.

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

Adjustable Motion Sensor (12v) 2.1mm/5.5mm 12v Input

This in-line Adjustable Motion Sensor sits between the power output and a driver allowing you to control your EL Panels, Tapes, Wires and LED's with motion.

This Motion Sensor comes ready to plug in with 5.5mm/2.1mm jack plug

This is a PIR (Passive Infra-red) sensor and has 110 degree angle and is adjustable between 30 seconds and 10 minutes

input/output from 12v to 24v

the sensor is 3.5cm diameter with both leads being 50cm long and ending in 5.5mm/2.1mm jack plug

1) ONLY IN-LINE MOTION SENSOR

This In-line Motion Sensor will plug in between any power supply below and a 12v adaptable driver

2) Crocodile Clips

Perfect if you already have your own 12V battery to run a driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) but will make an EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make an EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (thin): 125g (10cm x 5.5cm x 0.8cm)

1800mAh (square): 125g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 250g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

(Li-ion Batteries are only available to the UK due to airmail postal restrictions)

6) Mains Powered

This handy PSU can be used to make any EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

9) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or Accessories

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

12v switch with 2.1mm/5.5mm 12v input

This is a 12v switch which is 22cm long with 2.1mm/5.5mm 12v input.

This is useful for having an on/off switch between power supply and driver.

These switches can be used with any 12v device

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

CHASING Adaptable Driver for up to 15m EL Wire

This adaptable EL Driver only works for CHASING EL Wire

With this Driver you can adjust the speed of the chasing wire

It is a powerful Driver and is suitable for up to 15 metres of Chasing EL Wire or 5m ULTRA Chasing EL Wire
It is always best practice to connect the EL Wire to to the Driver before activating the Driver. This will avoid damaging if it is inadvertently switched on without the wire connected to it.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12v etc)

Its dimensions are: 5cm x 4cm x 4cm (L x W x H) and weighs 80g.

Instructions:

1. Switch On, (to first position), ensuring that you have the EL Wire attached, as not having it attached when switching the Driver on can burn the Driver out.
2. The first position is ON and normal chasing speed.
3. Slide the switch to the last position and the Chasing EL Wire will move between speeding up and slowing down.
4. Watch the speed and when you see the speed that you want the EL Wire to chase at, move the switch back to the first position and it will lock the speed you want to use.

This Driver does have an On/Off Switch

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This Driver is no exception as it also has a range of power inputs that hopefully cover most uses:

1) ONLY THE DRIVER

Maybe you have your own 12v 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2 Way power Splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (127mm x 72mm x 19mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3x18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

1m extender for 12v

you can use this 1m Extender by connecting the extender between the Power Source and the Driver

The 1m Extender is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

Remote Control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the Driver*

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!! If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions you may have.

In-line Dimmer Controller

This in-line dimmer control sits between the power output and a 12v driver giving you complete control over the brightness of your EL Panels, Tapes or Wires

This Dimmer control comes ready to plug in with 5.5mm/2.1mm jack plug

1) ONLY IN-LINE DIMMER

This In-line Dimmer (brightness control) will plug in between any power supply below and a 12v adaptable driver

2) Crocodile Clips

Perfect if you already have your own 12V battery to run a driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) but will make an EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make an EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (thin): 125g (10cm x 5.5cm x 0.8cm)

1800mAh (square): 125g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 250g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

(Li-ion Batteries are only available to the UK due to airmail postal restrictions)

6) Mains Powered

This handy PSU can be used to make any EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or Accessories

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Mains PSU - EU mains to 12V

This is a plug that goes into the mains power and then converts mains AC power to 12V DC which is what many of our EL Drivers are powered by.

Since EL Wire is very low power, we only have these power supply units that output a maximum of 1A.

These power supply units are recommended to be used with our adaptable drivers.

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Mains Powered PSU - UK Plug 240V to 12V

This is a UK Plug that goes into the mains power

It then converts the UK mains to 12V DC which is what many of our EL Drivers are powered by

Since EL Wire is very low power, we only have these power supply units that output a maximum of 1A

These connectors are suggested to be used with our adaptable drivers

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses:

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Mains PSU - US mains to 12V

This is a plug that goes into the mains power and then converts the AC power to 12V DC which is what many of our EL Drivers are powered by.

Since EL Wire is very low power, we only have these power supply units that output a maximum of 1A.

These power supply units are recommended to be used with our adaptable drivers.

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Tron Rinzler - Basic EL Panel Set

Here we have a really effective 'plug and play' EL Tape, splitters and EL Driver.

It still needs to be attached to your own costume.

With this set you get:

1) An Orange Rinzler T-Square

2) Two EL Hoops for the front of the costume

3) A Mini 1xAAA EL Driver

4) A 3-way splitter

5) 20cm of Velcro - with sticky hoop and sewable loop to make it easy to attach the set to a costume and have it removable.

This set is only available in ORANGE

The whole kit is ready to use - just plug and play!

If you are making a costume, it is a good idea to plan it out properly.

Feel free to message us if you have any questions.

So here are the dimensions of all the parts plus lengths of wire between them.

MINI DRIVER

The driver is 5cm x 2.5cm x 1.5cm

It has a switch on it - Off, On Continuous or Flashing and has a 10cm wire coming out of it that leads to the...

SPLITTER

The Splitter is 40cm long in total, 20cm of wire which then splits into 3 separate strands which are each 20cm long - 1 of them then lead to...

The Rinzler T-Square

This sits at the front of the chest and is 8cm wide and 4 cm long. The tape is just 350 microns thick - that is 1/3rd of a millimetre!

Sticky back Velcro is supplied to stick to the back of these EL Shapes - be careful putting it on as that glue is VERY sticky

You can then sew the other part of the Velcro onto the costume making it very convenient to attach and remove

Of course, you don't need to use the Velcro and can fix it any way you choose

EL Hoops

These hoops can be placed anywhere on the costume to give a great Tron effect

The whole kit is ready to use - just plug and play!

- - - - - - - - - - - -

This EL Tape comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver.

By using splitters you can also connect different strands to the same driver.

We have some crazy glowing masks & glasses that go well with this kit - take a look!

Figure of 8 power cable with UK Plug (IEC C7) packs

This is a Figure of 8 power cable with a 13 amp fused UK Plug (IEC C7).

Can be used to power any of our Excel drivers or any other device that require a figure of 8 power input.

The plug comes with a 1.3 metre cable and is available in packs of 3, 5 and 10.

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Hoops For Sewing on to Clothing

These hoops are clear and 6mm wide and are a really useful way to attach EL Wire to clothing

As you probably know, EL wire can be glued or sewn onto any material

But attaching it permanently means the garment cannot be washed in a machine as the EL Wire cannot be removed

These hoops make it easy to remove the EL Wire whether you want to wash the clothing, replace the EL Wire or even change the style

So you can just sew these hoops onto the clothing then thread the EL Wire through the hoops

The EL Wire can then be easily removed if you want to replace the wire or wash the clothing

These should certainly be considered if you are making a costume that is going to be used regularly as it will definitely cause you less aggro in the long run

EL Glowing Ties - with Choice of Drivers

Here we have some amazing looking glowing ties

The ties are in 5 colours:

White, Black, Gold, Red, Deep Blue

The EL Wire outline is in a selection of colours and you can choose different colour wire to the colour of the tie:
Light Blue (Tron Blue), Deep Blue, Red, Yellow, Lime Green, Turquoise-Green and White

glowing EL Tie

Of course, they need an EL Driver to make them glow - The EL Ties have a 50cm long power cable on them that ends in a standard EL Connector

NO DRIVER = £6 - choose this if you already have an EL Driver you can use to attach to the EL Glasses, or if you want to use a different driver or sequencer

Basic Driver = £10 - This is our Basic 2 x AA driver which has a button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF

Mini Driver = £12 - This is a very small and discreet Driver that takes a single AAA battery

Of course as the EL Glasses have a standard connector you can use one of our splitters to also run more wire or some EL Tape or EL Shapes off the same driver.

Or use a sequencer to make the EL Tie flash alongside other parts of your costume.

If it helps you plan part of a bigger EL Project, there is just over 60cm of EL Wire on the EL Tie

EL Iron Man Set (Mark 6) = EL Tape Glowing Eyes + EL Panel Triangle

With this set you get:

2 pieces of 3cm x 5cm EL Panel for the Iron Man eyes in a choice of colours

A Triangle EL Panel for the Arc Reactor, 18cm on long side, 12cm on short sides and 9cm at deepest point

A 2 x AA battery powered EL Driver with trigger switch to power the EL panels

2 x 2-way splitters help the panels fit the costume.

The suggested setup is:

The Driver is held on the body near the chest

One 2-way-splitter comes out and one channel goes off to the triangle panel acting as the Arc Reactor near the chest

The other channel has a second two-way splitter going off to the helmet to power the 3cm x 5cm EL Panels for the eyes

These EL Panels are NOT SEE-THRU so you must design the eye piece to be above or below the actual eye

By having it on a second 2-way-splitter it makes it easier to unplug and remove the helmet - if it all runs off a 3-way-splitter, which it could, it would not be so easy to unplug the head mask

The kit does not include the mask or and its best to put a design over the glowing Arc Reactor - apart from that, the whole kit is ready to use - just plug and play!

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.

- - - - - - - - - - - -

This EL Panel comes with a standard EL Wire connector so simply plugs into any EL driver.

Adaptable Driver for between 10 and 40 metres of EL Wire - Flashing Option

This adaptable EL Driver will power between 10 and 40 metres of EL Wire or 150 - 600 square cm (A4) of EL Panels or EL Tapes.
It has a flashing option.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12v etc)

Its dimensions are: 8cm x 5cm x 3.2cm (L x W x H)

Weight: 130g

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This Driver is no exception as it also has a range of power inputs that hopefully cover most uses:

1) ONLY THE DRIVER

Maybe you have your own 12v 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2 Way power Splitters?

Whatever your reason, this option gives you just the Driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to power this Driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the Driver. It is fairly large (127mm x 72mm x 19mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3x18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent charger as standard.

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

You can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several Drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

EL wire has loads of uses!

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats.

It is a cliché to say you are only limited by your imagination but with EL wire it is true!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.

We're sure you will be amazed - feel free to message us with any questions you may have.

Velcro - ? 2.00/m for attaching EL tape or EL panel to a fancy dress costume

This handy item is ideal for attaching EL Tape or EL Panels to clothing.

This Velcro has a sticky-back side that will stick firmly to the EL Tape or EL Panel.

The other part of the Velcro can be sewn onto the costume.

This makes it easy to remove the EL Panel for washing and general care.

The Velcro is 2cm Wide and 1 metre long

- - - - - - - - -