Quorra Replica EL Panel Front + Back + Driver

This listing is for:

1) Two pieces of single EL Hoops to go near each shoulder

2) 1.5cm x 25cm EL Tape to go down the front at one side

3) 2cm x 40cm EL Tape to go down the front at the other side

4) 2cm x 6cm EL Curve to 'tail off' the 40cm EL Tape

5) Two pieces EL Double Hoops for the waist

6) 14cm EL Tape Tron Identity Disc

7) A Powerful 8xAA Battery EL Driver (or rechargeable 3000mAh Li-ion Driver)

8) 5 Way Splitter, 3 Way Splitter, Mini 2 Way Splitter, Mini 3 Way Splitter - these make the whole set a simple 'plug and play'

9) 1 metre of Velcro - with sticky hoop and sewable loop to make it easy to attach the set to a costume and have it removable

The whole kit is ready to use - just plug and play!

Dimensions of the products:

If you are making a costume, it is a good idea to plan it out properly.

For this set, the driver/inverter is very powerful and comes with a separate power pack

So here are the dimensions of all the parts plus lengths of wire between them.

Feel free to message us if you have any questions

THE POWER PACK*

Takes 8 x AA batteries (not supplied) and is 12.7cm x 7.02cm x 1.9cm and has a 19cm thin power wire coming out of it that leads to the Driver

it has a 65cm thin power wire coming out of it that leads to the...

DRIVER

The Driver is 6cm x 4cm x 4cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The 5 Way Splitter is 40cm long in total,

it is 20cm of wire which then splits into 5 separate strands which are all 20cm long

1 of them then lead to...

Front Right

A Mini 2 Way splitter plugs into a 6cm EL Hoop and a thin 1.5cm x 25cm EL Tape

Sticky back Velcro is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky

You must sew the other part of the Velcro onto the costume making it very convenient to attach and remove

Of course, you don't need to use the Velcro and can fix it any way you choose to.

Front Left

Here a Mini 3 Way splitter is plugged into a 6cm EL Hoop, a long 2cm x 40cm EL Tape and a 6cm EL Curve to tail off the end of the EL Tape

Two more of the channels off the main 5 Way Splitter go to...

Double Hoops

These two Double Hoop EL Shapes curve round either side of the waist

Another channel, off the main 5 Way Splitter goes to the back of the costume to the...

EL Identity Disc

This Large EL Hoop is 14cm in diameter, there are two thin EL Tapes running in concentric circles and the inner diameter is just over 9cm across

SPLITTERS

This is how we recommend using the Splitters:

A 5 Way Splitter coming straight from the Driver - for the left side, right side, 2 x Double Hoops and ID disc

* Instead of 8 x AA battery pack this whole unit can be powered by a small rechargeable Li-ion battery

The 3000mAh battery is as powerful as 8 x AA batteries but weighs only 172g and is 7.3cm x 5.6cm x 2.2cm

It comes with an Intelligent Charger with UK plug

The whole kit is ready to use - just plug and play!

We have some crazy glowing masks & glasses that go well with this kit - have a look!

Clu Replica EL Panel Front + Back + Driver

This listing is for:

1) One piece of Clu shaped EL Panel to run up one side of the chest

2) One 40cm angled piece of EL Tape to run up the other side of the chest

3) A 6cm EL Hoop to go on the shoulder at the top of the curved piece

4) 2 x Double hoops for the waist

5) A 14cm EL Tape Tron Identity Disc

6) A Powerful 8 x AA battery EL Driver or rechargeable 3000mAh Li-ion Driver.

7) 1 x 3-way splitter, a mini 2-way splitter, a mini 3-way splitter and a 50cm extender wire - these make the whole set a simple 'plug and play'

8) 1 metre of Velcro - with sticky hoop and sewable loop to make it easy to attach the set to a costume and have it removable

The whole kit is ready to use - just plug and play!

Dimensions of the products:

If you are making a costume, it is a good idea to plan it out properly.

For this set, the driver/inverter is very powerful and comes with a separate power pack

So here are the dimensions of all the parts plus lengths of wire between them.

Feel free to message us if you have any questions

THE POWER PACK*

Takes 8 x AA batteries (not supplied) and is 12.7cm x 7.02cm x 1.9cm and has a 19cm thin power wire coming out of it that leads to the driver.

DRIVER

The driver is 8cm x 5cm x 3.2cm and has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The 3-way Splitter is 40cm long in total, it is 20cm of wire which then splits into 3 separate strands which are all 20cm long

2 of the 3 channels lead to the front of the costume, one to the Right and the other to the Left

Front Right

A mini 3-way splitter plugs into a 6cm EL Hoop, the 40cm Curved EL Panel and one of the Double Hoops

Sticky back Velcro is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky

You must sew the other part of the Velcro onto the costume making it very convenient to attach and remove

Of course, you don't need to use the Velcro and can fix it any way you choose

Front Left

Here a mini 2-way splitter is plugged into the Clu shape EL Panel and the other Double Hoop

It is best to plug the 50cm extender into the 3rd channel off the main 3-way splitter which then leads to the...

EL Identity Disc

This Large El Hoop is 14cm in diameter, there are two thin EL Tapes running in concentric circles and the inner diameter is just over 9cm across

SPLITTERS

This is how we recommend using the splitters:

A 3-way splitter coming straight from the driver - one channel leads to a mini-3way splitter for the Front Right of the costume

- another channel leads to a mini 2-way splitter for the Front Left

- the last channel plugs into a 50cm extender and powers the ID disc at the back of the costume

* Instead of 8XAA battery pack this whole unit can be powered by a small rechargeable Li-ion battery

The 3000mAh battery is as powerful as 8xAA batteries but weighs only 172g and is 7.3cm x 5.6cm x 2.2cm

It comes with an Intelligent Charger with UK plug

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set - feel free to message me if you have any questions

The whole kit is ready to use - just plug and play!

OR CONTACT US IF YOU WANT ADVICE PLANNING YOUR SET

We have some crazy glowing masks & glasses that go well with this kit - take a look!

EL Iron Man Set = EL Tape Glowing Eyes + EL Panel Arc Reactor

The Iron Man Set is here to supply you with 'plug and play' EL Panels, splitters and driver to help you build a glowing Iron Man Costume

With this kit you get:

1) 2 pieces of 3cm x 5cm EL Panel for the Iron Man eyes in a choice of colours:

Light Blue, White, Red, Deep Blue and Pink

2) Plus a 10cm diameter round white EL Panel for the Arc Reactor

3) Also a 2 x AA battery driver/inverter with switch to power the panels

4) And 2 lots of 2 way splitters help the panels fit the costume

The suggested setup is:

The Driver/Inverter is held on the body near the chest

One two-way-splitter comes out and one channel goes off to the round panel acting as the Arc Reactor near the chest

The other channel has a second two-way splitter going off to the helmet to power the 3cm x 5cm EL Panels for the eyes

By having it on a second 2-way-splitter it makes it easier to unplug and remove the helmet - if it all runs off a 3-way-splitter, which it could, it would not be so easy to unplug the head mask

The kit does not include the mask or and its best to put a design over the glowing Arc Reactor - apart from that, the whole kit is ready to use - just plug and play!

2cm Round Hoop - Flat EL Panel with Driver - Become Human Style

This 2cm Round EL Hoop is paper thin and can go flat against the skin.

This hoop is cleverly powered using a 5cm (2 inch) flat tape coming out of the hoop which can be coated in concealer paint to make the wire look invisible

You will need an EL Driver to power this EL Hoop and if you choose the 'Hoop and Driver' option we will supply a Mini EL Driver like this one:

You will also receive a 50cm extender wire to help you hide the driver, or if you are using other EL panels with the costume then you can attach it all to the same driver.

You may also be interested in our 7cm Triangle EL Panel:

https://elwirecraft.co.uk/product/7cm-triangle-detroit-become-human/

Black Widow Gauntlet Glove

This set is to help you recreate a glowing gauntlet glove from The Avengers Black Widow character

It is ideally attached to motorbike gloves

We also have a Black Widow Body and Leg Set

This Gauntlet Set consists of:

1) 2 x Light Blue (Tron Blue) EL Tapes 1.5cm x 20cm divided into four sections

These are to attach round the wrist

2) 2 x 10cm 1.5mm Light Blue (Tron Blue) EL Wires

These run up the back of the hand to form the 'Black Widow's Bite'

3) Mini EL Driver

This Driver takes a single AAA Battery and measures just 5cm x 3cm x 1.5cm
it can easily be hidden inside a motorbike glove

4) 4-way mini Splitter

This is the splitter you need to join all the wires and tape together into one Driver

5) 40cm of Velcro to help attach the EL Tape to the glove

It doesn't have to be attached this way, but it is fairly easy and our recommended way

This set is 'Plug and Play', you just need to attach it to your gloves

We have some crazy glowing masks & glasses that go well with this kit - take a look!

Burning Man Festival EL Wire Set for Clothing

This set has been especially designed for you lucky folks off to the Burning Man Festival in Black Rock, Nevada

For those of us that have to slum it with UK festivals, it is also a useful and robust EL Wire set to make you stand out from the crowd.

The Set consists of a Trigger controlled EL Driver, by running the switch down your sleeve you can flick your EL Wire creation on and off at will

The Driver is used to power:

1 x 3 metre long EL Wire

2 x 1 metre lengths of EL Wire

1 x 3 Way Splitter

30 x clear hoops

It's the robust 3.2mm diameter wire enclosed in this set, which is ideal for the harsh conditions in the Nevada desert.

You can choose which colours you would like from the drop down menu.

Or if you would like 3 different colours please choose that option and then message us with your colour choices.

5 metres of EL Wire makes any costume look amazing but it is not a huge amount of EL Wire so if you want more wire on your costume please look at our other EL Wire sets, or get the EL Driver and EL Wire separately
We have some crazy glowing masks & glasses that go well with this kit - take a look!