EL Iron Man Body Set = EL Panel Arc Reactor + Hand Repulsors
Our Iron Man Sets supply you with 'plug and play' EL Panels, splitters and driver to help you build a glowing Iron Man Costume
With this kit you get:
1) 2 pieces of 3cm Diameter EL Panel for the Hand Repulsors
2) Plus a 10cm diameter round (or triangle shaped) white EL Panel for the Arc Reactor
3) Also a 2 x AA battery driver/inverter with switch to power the panels
4) And specialist 3 way splitter and 2 x 1.2m extenders to get power to the round panels down on the hands
EL Panels for the Hand Repulsor
The suggested setup is:
The Driver/Inverter is held on the body near the chest
A Three-way-splitter comes out and one channel goes off to the round panel acting as the Arc Reactor near the chest
The other two channels are longer and these have 1.2m extender wires attached to them to run down each arm to take power to the EL Panels for the Hand Repulsor
We have some crazy glowing masks & glasses that go well with this kit - take a look!
EL Iron Man Set = EL Tape Glowing Eyes + EL Panel Arc Reactor
The Iron Man Set is here to supply you with 'plug and play' EL Panels, splitters and driver to help you build a glowing Iron Man Costume
With this kit you get:
1) 2 pieces of 3cm x 5cm EL Panel for the Iron Man eyes in a choice of colours:
Light Blue, White, Red, Deep Blue and Pink
2) Plus a 10cm diameter round white EL Panel for the Arc Reactor
3) Also a 2 x AA battery driver/inverter with switch to power the panels
4) And 2 lots of 2 way splitters help the panels fit the costume
The suggested setup is:
The Driver/Inverter is held on the body near the chest
One two-way-splitter comes out and one channel goes off to the round panel acting as the Arc Reactor near the chest
The other channel has a second two-way splitter going off to the helmet to power the 3cm x 5cm EL Panels for the eyes
By having it on a second 2-way-splitter it makes it easier to unplug and remove the helmet - if it all runs off a 3-way-splitter, which it could, it would not be so easy to unplug the head mask
The kit does not include the mask or and its best to put a design over the glowing Arc Reactor - apart from that, the whole kit is ready to use - just plug and play!
EL Iron Man Set (Mark 6) = EL Tape Glowing Eyes + EL Panel Triangle
With this set you get:
2 pieces of 3cm x 5cm EL Panel for the Iron Man eyes in a choice of colours
A Triangle EL Panel for the Arc Reactor, 18cm on long side, 12cm on short sides and 9cm at deepest point
A 2 x AA battery powered EL Driver with trigger switch to power the EL panels
2 x 2-way splitters help the panels fit the costume.
The suggested setup is:
The Driver is held on the body near the chest
One 2-way-splitter comes out and one channel goes off to the triangle panel acting as the Arc Reactor near the chest
The other channel has a second two-way splitter going off to the helmet to power the 3cm x 5cm EL Panels for the eyes
These EL Panels are NOT SEE-THRU so you must design the eye piece to be above or below the actual eye
By having it on a second 2-way-splitter it makes it easier to unplug and remove the helmet - if it all runs off a 3-way-splitter, which it could, it would not be so easy to unplug the head mask
The kit does not include the mask or and its best to put a design over the glowing Arc Reactor - apart from that, the whole kit is ready to use - just plug and play!
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.
- - - - - - - - - - - -
This EL Panel comes with a standard EL Wire connector so simply plugs into any EL driver.
Black Widow Gauntlet Glove
This set is to help you recreate a glowing gauntlet glove from The Avengers Black Widow character
It is ideally attached to motorbike gloves
We also have a Black Widow Body and Leg Set
This Gauntlet Set consists of:
1) 2 x Light Blue (Tron Blue) EL Tapes 1.5cm x 20cm divided into four sections
These are to attach round the wrist
2) 2 x 10cm 1.5mm Light Blue (Tron Blue) EL Wires
These run up the back of the hand to form the 'Black Widow's Bite'
3) Mini EL Driver
This Driver takes a single AAA Battery and measures just 5cm x 3cm x 1.5cm
it can easily be hidden inside a motorbike glove
4) 4-way mini Splitter
This is the splitter you need to join all the wires and tape together into one Driver
5) 40cm of Velcro to help attach the EL Tape to the glove
It doesn't have to be attached this way, but it is fairly easy and our recommended way
This set is 'Plug and Play', you just need to attach it to your gloves
We have some crazy glowing masks & glasses that go well with this kit - take a look!
Avengers Black Widow Torso Set
This is the perfect set to help make an awesome Black Widow costume
It is part of a 3 part Full Black Widow Set that also includes her gauntlets and leg set
(but this one also looks great on its own)
With this set you get:
1) 1 pieces of 1.5 metres of high quality (3.2mm) Electroluminescent Wire.
This runs up the body, round behind the neck and then back down to the waist
2) 2 pieces of 50cm EL Wire for each of the arms
3) Trigger Driver so you can switch from 'glow mode' to 'incognito' using a switch in your sleeve
4) Speciality SLL (Short Long, Long) 3 Way Splitter to power the three EL Wires all over the body of the costume
5) 30 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine
The EL Wire is in Light Blue (Tron Blue) but if you do want this set in a different colour please get in touch with us
To make it easier to design your outfit, below are the dimensions of the inverters and lengths of connecting wires - there is also tips on how to create your costume
DRIVER/INVERTER
The Power Pack takes 2 x AA batteries and is needed to make the EL Wire glow
The power pack/inverter is 8.5cm x 5cm x 2cm
It has an On/Off plunger switch that can run down the arm of the costume and be used to discreetly turn the glowing wire on and off
There is an 8cm wire coming out of it that leads to the...
SPLITTER
The Splitter has one short 10cm channel which is supposed to go to the 1.5m EL Wire
The two longer channels are 70cm and designed to reach up to the arms to light the 50cm EL Wires
EL WIRE
As explained above, the 1.5m EL Wire creates a great bodyline by starting at the waist, runs up the body and round the neck then returns to the waist
EL HOOPS
These make it easy to attach the EL Wire to a costume by sewing them on and then threading the EL Wire through the hoops. This also makes it easier to remove the EL Wire to wash the clothing
It is also possible to sew the EL Wire directly onto the costume
The whole kit is ready to use - just plug and play!
OR FEEL FREE TO CONTACT US IF YOU WANT HELP WITH YOUR EL PROJECT
We have some crazy glowing masks & glasses that go well with this kit - take a look!
Avengers Black Widow Torso and Leg Set
This is the perfect set to help make an awesome Black Widow costume
It is 2 parts of a 3 part Full Black Widow Set, which also includes her gauntlets.
(but this one also looks great on its own)
With this set you get:
1) 1 pieces of 1.5 metres of high quality (3.2mm) Electroluminescent Wire.
This runs up the body, round behind the neck and then back down to the waist
2) 2 pieces of 50cm EL Wire for each of the arms
3) 2 panels of EL Wire for each knee
4) Trigger Driver so you can switch from 'glow mode' to 'incognito' using a switch in your sleeve
5) A 2-way Mini Splitter leading to a Speciality SLL (Short Long, Long) 3 Way Splitter to power the three EL Wires all over the body of the costume and a Long 2-way Splitter to power the knee panels.
6) 30 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine
The EL Wire is in Aqua (Tron Blue) but if you do want this set in a different colour please get in touch with us
To make it easier to design your outfit, below are the dimensions of the inverters and lengths of connecting wires - there is also tips on how to create your costume
DRIVER/INVERTER
The Power Pack takes 2 x AA batteries and is needed to make the EL Wire glow
The power pack/inverter is 8.5cm x 5cm x 2cm
It has an On/Off plunger switch that can run down the arm of the costume and be used to discreetly turn the glowing wire on and off
There is an 8cm wire coming out of it that leads to the...
SPLITTERS
The 3 way Splitter has one short 10cm channel which is supposed to go to the 1.5m EL Wire and the two longer channels are 70cm and designed to reach up to the arms to light the 50cm EL Wires
The mini 2 way splitter is 20cm long
EXTENDERS
Theses are 50cm long
EL WIRE
As explained above, the 1.5m EL Wire creates a great bodyline by starting at the waist, runs up the body and round the neck then returns to the waist
EL HOOPS
These make it easy to attach the EL Wire to a costume by sewing them on and then threading the EL Wire through the hoops. This also makes it easier to remove the EL Wire to wash the clothing
It is also possible to sew the EL Wire directly onto the costume
The whole kit is ready to use - just plug and play!
OR FEEL FREE TO CONTACT US IF YOU WANT HELP WITH YOUR EL PROJECT
We have some crazy glowing masks & glasses that go well with this kit - take a look!
Avengers Black Widow Full Set
This is the perfect set to help make an awesome Black Widow costume
Full Black Widow Costume Set includes torso, gauntlets and knee pads.
With this set you get:
1) 1 piece of 1.5 metres of high quality (3.2mm) Electroluminescent Wire.
This runs up the body, round behind the neck and then back down to the waist
2) 2 pieces of 50cm EL wire for each of the arms
3) 2 panels of EL Wire for each knee and 30cm of Velcro for attachment.
4) Pair of EL Wire for the Gauntlet Sets (2 x mini driver, 4 x EL Wire, 4 EL Ribbon, Splitters and Velcro)
5) Trigger Driver so you can switch from 'glow mode' to 'incognito' using a switch in your sleeve
6) A 2-way Mini Splitter leading to a Speciality SLL (Short Long, Long) 3 Way Splitter to power the three EL Wires all over the body of the costume and a Long 2-way Splitter to power the knee panels.
7) 30 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine
The EL Wire is in Deep Blue but if you do want this set in a different colour please get in touch with us
To make it easier to design your outfit, below are the dimensions of the inverters and lengths of connecting wires - there is also tips on how to create your costume
DRIVER/INVERTER
The Power Pack takes 2 x AA batteries (not supplied) and is needed to make the EL Wire glow
The power pack/inverter is 8.5cm x 5cm x 2cm
It has an On/Off plunger switch that can run down the arm of the costume and be used to discreetly turn the glowing wire on and off
There is an 8cm wire coming out of it that leads to the...
SPLITTERS
The 3 way Splitter has one short 10cm channel which is supposed to go to the 1.5m EL Wire and the two longer channels are 70cm and designed to reach up to the arms to light the 50cm EL Wires
The mini 2 way splitter is 20cm long
EXTENDERS
2 x 50cm extenders
EL WIRE
As explained above, the 1.5m EL Wire creates a great bodyline by starting at the waist, runs up the body and round the neck then returns to the waist
EL HOOPS
These make it easy to attach the EL Wire to a costume by sewing them on and then threading the EL Wire through the hoops. This also makes it easier to remove the EL Wire to wash the clothing.
It is also possible to sew the EL Wire directly onto the costume
The whole kit is ready to use - just plug and play!
OR FEEL FREE TO CONTACT US IF YOU WANT HELP WITH YOUR EL PROJECT
We have some crazy glowing masks & glasses that go well with this kit - take a look!
