Dance Act EL Wire Set = 12 metres of EL Wire + Trigger Driver

Take Street Dance to a whole new level with this Glowing EL Wire Set with a hand controller to switch the lights On and Off

This set is for a 'plug and play' EL Wire and Driver - but you have to attach it to your own costume

With the set you get:

1) 2 pieces of 3 metres EL Wire

2) 6 pieces of 1 metre EL Wire

3) A 'Dance Act' Driver that has a 1.2m long power cord that runs down the arm allowing the performer to turn the lights on and off at will

This driver is powerful enough to make up to 15 metres of EL Wire glow.

4) plus several splitters (3 x 2-way, 2 x 4-way, a spare 5-way and 2 x extenders)

By 'daisy chaining' the splitters you can have all the lengths of EL Wire attached to this one driver

5) 50 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

The EL Wire can be any combination of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Grass Green, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White

The whole kit is ready to use - just plug and play!

Our EL Wires in Action

Dimensions of the products:

If you are making a costume, it is important to plan it out properly.

For this Dance Act set, the driver is very powerful and so it comes with a separate power pack that takes 8 x AA batteries or a powerful rechargeable (3000mAh) Lithium-Ion Battery and battery charger (please choose the plug type you need)

So here are the dimensions of all the parts plus lengths of wire between them.

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 6.5cm x 6cm x 3cm

The Rechargeable Li-ion battery is smaller and lighter:

172g (7.3cm x 5.6cm x 2.2cm)

it has a 65cm thin power wire coming out of it that leads to the...

DRIVER

The driver is 6cm x 4cm x 4cm

It has a 1.2m long power lead coming out that ends with an ON/OFF plunger giving you the ability to control the light

It has a 55cm wire coming out of it that leads to a...

SPLITTER

The Splitters are 40cm long in total,

it is 20cm of wire which then splits into the separate strands which are all 20cm long

GLOWING EL WIRE
2 x 3 metres is for the body

6 x 1 metres is for the legs, arms and head

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set

EL Wire Dance Act

The whole kit is ready to use - just plug and play!
We have some crazy glowing masks & glasses that go well with this kit - take a look!

EL Panel - 10cm x 10cm

May we present this versatile 10cm wide and 10cm long Electroluminescent Panel with a lit area of 9.4cm square.

The Panel needs a Driver/Inverter to power it, It is easiest to run the driver straight off the device you are backlighting.

These panels are currently available in these colours: Light Blue (Tron blue), Red, Grass Green and White

Installing an EL Panel as a backlight is fairly easy that basically involves accessing the screen of your device, cutting the EL Panel to the desired size, then wiring the driver so it is powered by the device, then finally putting it all back together.

There are plenty of walk-through videos showing step by step how to install an EL backlight

EL Tape is an incredibly versatile material it can be bent and wrapped around things.

It can even have holes and shapes punched into it and be cut to your chosen shape

We have EL Panels and EL Tape in all sorts of shapes and sizes including animated and sound activated moving panels.

EL Panel - 13cm x 13cm

May we present this versatile 13cm wide and 13cm long Electroluminescent Panel.

The Colour is Light Blue when on and White when off

White when On and Pink when Off.

The Panel needs a Driver/Inverter to power it - It is easiest to run the driver straight off the device you are backlighting.

There is an option to have this panel with a small waterproof Driver/Inverter and you have a choice of 4.5v, 6v, 9v and 12v drivers that are designed not to take up too much space.

Installing an EL Panel as a backlight is a fairly easy procedure that basically involves accessing the screen of your device, cutting the EL Panel to the desired size, then wiring the driver so it is powered by the device, then finally putting it all back together.

There are plenty of walk-through videos showing step by step how to install an EL backlight

EL Tape is an incredibly versatile material it can be bent and wrapped around things.

It can even have holes and shapes punched into it and be cut to your chosen shape

We have EL Panels and EL Tape in all sorts of shapes and sizes including animated and sound activated moving panels.

EL Panel - 25 x 25cm

We have made this EL Panel with Telescope Flat-Field Correction in mind

This EL Panel can be used like any other for the variety of uses people find for these EL Panels.

But if you need an EL Panel for flat-field correction then this is the type of Panel you may need.

If this Panel is too large for your telescope, then you may find this A5 panel (14cm x 20cm) would suite your needs better.

Or if you need a larger EL Panel for flat-field calibration, then you will have to use out A3 EL Panel (29cm x 42cm)

If you are using this Panel for flats then you may want to use some opalescent acrylic to diffuse the granulation of the EL Panel

We do not currently have any in stock of this opalescent acrylic, but it is available online (e.g. here)

The EL Panel comes with a Driver that can hot swap between mains (UK, US or Euro), 8xAA Battery Box, rechargeable Li-ion battery, 12v Crocodile Clips or car lighter attachment to put on your own 12v source

All these parts for the Driver are available in the EL Accessories

Here is the experience of one of our customers from using our EL Panels for flat-field correction:

You'll remember that we exchanged emails following my purchase of an A4 EL panel from you last month via eBay.

In your last email you asked whether the Panel would be bright, white and even enough for telescope calibration, and I said I would let you know how it performed once I had it all set up.

For use, I sandwiched the EL Panel between a sheet of black acrylic and a sheet of opal frosted acrylic, bound the edges together with black plastic insulation tape, and fixed the assembly into a deep A4 picture frame.

The attached images show how the panel performs in producing flat-fields for the correction of astronomical images. A 6-inch reflecting telescope and astronomical camera with an APS-size CCD colour sensor were used. This is the maximum size of telescope that can be calibrated with the A4 panel.

The Panel was placed directly onto the telescope tube. With the particular camera I used, the exposure needed to give around 33% saturation of the sensor (the ideal value) was 0.25sec. So brightness is perfectly adequate for the purpose.

The attached images include the flat-field obtained and an analytical map of the brightness distribution. The vignetting is entirely due to the optics of the telescope. There is no detectable unevenness arising from the EL Panel alone.

I have not tested the spectral distribution of the panel. Many astronomical cameras use monochrome sensors and colour images are obtained by combining exposures taken through red, green and blue filters, as well as some special narrow-band filters designed to highlight specific radiation from hydrogen, oxygen, etc. I expect that flats obtained using these filters will need different exposures to compensate for differences in the emission spectrum of the EL Panel.

Two of the attached images show a picture taken last week of the galaxy pair M81 and M82, with and without correction using the flat field panel. The 'without correction' picture is a raw image before any processing - the 'with correction' picture shows the result of flat-field correction combined with processing using specialised software to manipulate the brightness range of the image.

These are a very good results and I think it fair to say that a perfectly adequate set-up can be made using your Panels.

Thanks for your help getting the Panel to me and sorting out the glitches.

Raw Image:

With Flat-field Correction:

CHASING 2.3mm EL Wire - Motion Effect @ £5 per metre

This listing is for 2.3mm Electroluminescent glow wire with a chasing motion.

The chasing motion looks amazing - it flows in one continuous motion (it jumps a bit in this picture but that is just the video)

EL Chasing Wire

It is available in any of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Gold, Lime Green and Green

The wire has a special connector on it so does not clip into standard EL Wire connectors or drivers. It needs a Chasing EL Wire Driver (available in the drop-down menu above)

We are now stocking 'Splitters' for chasing El Wire if you would like 2 or 3 separate lengths from the same Driver

A wide selection of other EL Tapes, EL Wire, Sequencers, Drivers and helpful EL accessories are available in our online store

EL wire has loads of uses!

It looks amazing when decorating the interior or exterior of cars and motorbikes and it can be used inside and outside of the home and office and can even be threaded into clothes and hats.

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.

We're sure you will be amazed - feel free to message us with any questions you may have and for any advice you may need for your EL projects.

Speciality Splitters for EL Wire

Speciality splitters are for when you get too carried away with your EL Project and perfection is beginning to tip over into obsession

These Speciality Splitters are 20cm of wire up to the split - thereafter the wire lengths vary on each splitter making them very versatile

SL: A two way splitter - one Short, one Long - The measurements of the 2 way SL Splitters are:

SML: A Three way splitter - one Short, One Mid and one Long - The measurements of the 3 way SML Splitters are:

SLL: A Three way splitter - one Short and Two Long - The measurements of the 3 way SLL Splitters are:

Other Splitters in our range are

Mini Splitters: 2-way up to 6 way splitters that are 20cm in total length

Long Splitters: 2-way and 3-way splitters that are 70cm in total length

(standard splitters are 40cm in total length)

Splitter Switches: 2-way splitter with a switch in the middle that lets you isolate each channel

Of course all our Splitters, as well as the EL Wire, EL Tape, EL Panels and EL Drivers we supply come with universal EL Connectors attached

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions

3cm x 1 metre DOUBLE ENDED EL Tape Cut to Make 2 Strips of Any Length

With this 'double ended' EL Tape you end up with two pieces of EL Wire for the price of one! - just cut it in half.

This is a 3cm wide and 1 metre long strip of Electro-Luminescent Tape.

*The full Glow area of the Tape is 2.3cm x 1 metre*

The EL Tape has a connector attached to BOTH ENDS:

This means it can be cut into two pieces of any length you choose.

A 2 Way Splitter is also provided so you can run both the EL Tapes from just one driver.

When cutting EL Tapes or Panels, it is best to use sharp scissors and to seal the cut afterwards with glue and/or clear nail varnish.

We stock the following colours:

Light Blue (Tron Blue), Red, Green, White and Deep Blue

In the drop down menu is also the option to buy the EL Tape with a powerful mains powered or portable Driver (8xAA batteries)

These Drivers are powerful enough to drive about 1 1/2 metre of this (3cm x 1metre) EL Tape in total and will make the Tape plug and play

(If it is more convenient to have a car-lighter attachment instead of the 8xAA Battery Box to power this driver please let us know)

There is a whole selection of Drivers available at EL Wire Craft that could power this EL Tape such as Sequencer or Sound Activated Drivers.

EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it.

EL Tape 5cm x 35cm single connector

This is a 5 cm wide and 35cm long strip of glowing Electroluminescent Tape.

It is ideal for using as an arm band for Detroit: Become Human cosplay

If needed, this EL Panel can be cut down to size using sharp scissors.

When cutting EL Tape or Panel it is best to use sharp scissors or craft knife and to seal the cut afterwards with glue and/or clear tape.

This EL Panel is available in Light Blue (Tron Blue) and White.

In the drop down menu, you'll have the option to buy the EL Tape with a powerful mains powered or portable Driver (8xAA batteries)

These Drivers are powerful enough to drive two of these EL Tapes in total and will make the Tape plug and play

There is a whole selection of drivers available at El Wire Craft that could power this EL Tape such as Sequencer or Sound Activated Drivers.

EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it.

Adaptable Driver for up to 5m EL Wire (Water Resistant)

This is a super adaptable EL Driver which will run up to 5 metres of EL wire or 150squ cm of EL Tapes or EL Panels.

It DOES NOT have a flashing function - but comes with the option of an On/Off 'Plunger Switch'. The switch will latch on when fully pressed down, press for a second time and the switch will latch off.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12V etc)

It has two integral screw fixing points on either side of it so it can be fastened down.

It has a water-tight seal all round it including where the wires come in and out of it. Attached in a sensible place it should withstand all types of weather

Its dimensions are: 29mm x 19mm x 24mm (L x W x H)

The screw fixing tabs stick out 6mm each on the 29mm side and could easily be cut off if space is vital. The Driver weighs 25g.

EL Driver Options:

This EL Driver comes either with or without an On/Off switch.

Without a switch it will draw power whenever it is connected to a power source

Or It has a Trigger Switch on the end of a 1.2metre cable. For portable uses, this allows the unit to be held on the body while the switch runs down the sleeve to the hand. For other uses, it allows the driver to be mounted somewhere pretty far from the switch

This Driver has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters, or will you be cutting off the connector and using the bare wires?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (127mm x 72mm x 19mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger, unless you choose 'No Charger'.

6) Mains Powered

This handy PSU can be used to make this EL Driver powered by Mains Electricity (UK, US or Eu plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories.

8) Self Stripping Wire Connectors (2)

This Driver is perfect for using when decorating your car with EL Wire.

An incredibly simple way to join the wires into your 12V loom is using these Self Stripping Wire Connectors (pack of 2)

9) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

EL wire has loads of uses, this neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats.

It is a clichÃ© to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message me with any questions.

2 Way Switch Splitter with "Middle: ALL OFF"

These splitters are a handy and cheap way of making different parts of your EL costume/project light up

The EL Splitter Switch is simply a 2 way splitter with a 3 switch on it

The switch has three positions:

Switch to the left: Channel A ON + Channel B OFF

Switch to the right: Channel A OFF + Channel B ON

Switch in the middle: Both Channels OFF

(we also sell a different "Both ON" switch splitter - on this type, the Switch in middle is both channels ON)

The spitter is 20cm in total and it is often used with extender wires running down the sleeve to allow the switch splitter to sit in your hand

This "Middle: All OFF" Switch Splitter is useful is you want to overlay two different designs onto one project

This is a mask that was made with two different designs on it. On one channel of the splitter is the EL Wires of the Alien Face, the other channel connects to the EL Wires for the Crazy Face

The wearer can have the mask with the Crazy Face showing and then, when they want to freak people out, just flick the switch across so the Alien Face appears

We also provide this splitter where the Middle setting is BOTH ON - click here to have a look

*ALL the EL wire we supply comes with a universal EL connector, so they plug straight into one of these splitters or a driver*

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliche to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions

Enclosed Battery Box (8 x AA) - 12V PORTABLE POWER PACK

This handy item is an enclosed battery box that takes 8 x AA batteries (batteries not supplied) and gives an output of 12v.

*Please note this is just a battery box, IT IS NOT AN EL DRIVER/INVERTER. They are available as a power supply for our EL Drivers or EL Sequencers.*

The size of this power pack is:

127mm x 72mm x 19mm and the lead for the output is 17cm long with a 2.1mm/5.5mm plug on the end.

This is a useful item for when you need to power a 12v appliance that you want to make portable

REMEMBER:

Standard alkaline batteries are 1.5v each, so 8 of them will make 12v, however rechargeable batteries are only1.2v each, so 8 of them in this battery pack will only produce 9.6v.

- - - - - - - - - - - - - - - - - -

These battery packs are used to power powerful driver/inverters for EL wire

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

3 x 18650 Battery Box

This handy item is a battery box that takes 3 x 18650 batteries and gives an output of just under 12V

*Please note this is just a battery box IT IS NOT AN EL DRIVER/INVERTER. They are available as a power supply for our EL Drivers or EL Sequencers.*

18650 batteries are the long round flat ended rechargeable 'INR' or 'IMR' batteries which have become popular since they are used in vaping rigs.

We have made this battery box to power the 12v EL Drivers and Sequencers,

The 18650 batteries are 3.7v each, so the power input from this Battery Box with 3 is a total of 11.1V

We have found this barely makes a difference when powering EL Drivers compared to the convenience of these rechargeable batteries

This Battery Box comes with a standard 2.1mm/5.5mm connector

The size of the Battery Box power pack is 76mm x 60mm x 19mm and the output lead is 250mm long.

- - - - - - - - - - - - - - - - - -

These battery packs are used to power powerful driver/inverters for EL wire

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

12V Rechargeable 5000mAh Li-ion Battery for EL Driver and LED

This battery pack has been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

While trying out different battery systems we found that many of them exaggerated the milliamp/Hour ratings, these batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

The battery pack weight and dimensions are: 265g and (6.0cm x 5.8cm x 3.9cm)

Input power is 12.6V DC with an output of 12V DC. There is an over-charge / discharge protection.

The intelligent 1A Li-ion charger (supplied as standard) has a UK plug. It is recommended these Li-ion batteries are best charged with these chargers

12V Rechargeable Li-ion batteries & chargers

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

Whilst trying out different battery systems, we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

We have these batteries in five different sizes with the following weights and dimensions:

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (Square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

15Ah: 725g (14.0cm x 6.5cm x 4.7cm)

SPECS:

Capacity: 1000mAh, 1800mAh, 3000mAh or 5000mAh

Input power: DC 12.6V

Output: DC 12V

Over-charge / discharge protection: Yes

These Li-ion batteries are best charged with dedicated Li-ion Intelligent Chargers

The 15Ah has an overcharge protection up to 15A so can take a larger current draw

AC Mains intelligent chargers come with UK plugs and are available in a choice of:

No Charger - if you already have your own intelligent Li-ion battery charger

1A Charger - This will charge the Li-ion batteries at a max of 1A per hour

2A Charger - This will charge the Li-ion batteries at a max of 2A per hour

EL Tape TRON SET = 2 x 25cm Tape + EL Hoops + Driver

This amazing kit contains just what you need for a great glowing Tron costume:

1) 2 pieces of 2cm x 25cm EL Tape

2) 2 pieces 6cm EL Hoops

3) 4 Way Black Splitter

4) Powerful portable Driver/Inverter powered by 8xAA batteries (not supplied) or rechargeable Li-ion battery.

5) It also comes with just over 50cm of Velcro - sticky on one side and sewable on the other to help you attach the El Tape and EL Hoops to a costume.

The EL Tape and EL Hoops can be any combination of these colours:

Light Blue (Tron Blue), Deep Blue, Pink, Green, Orange, and White

The whole kit is ready to use - add batteries and plug and play!

Dimensions of the products:

If you are making a costume, it is a good idea to plan it out properly.

So here are the dimensions of all the parts plus lengths of wire between them:

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 6.5cm x 6cm x 3cm

it has a 65cm thin power wire coming out of it that leads to the...

DRIVER

The driver is 6cm x 4cm x 4cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The 4 Way Splitter is 40cm long in total,

it is 20cm of wire which then splits into 4 separate strands which are all 20cm long and lead to the...

EL TAPE

The EL Tape has a 20cm wire on it before 25cm of glorious glowing EL Tape

The tape is just 350 microns thick - that is 1/3rd of a millimetre!

Sticky back Velcro is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky

You must sew the other part of the Velcro onto the costume making it very convenient to attach and remove

Of course, you don't need to use the Velcro and fix it any way you choose

EL HOOPS

Two channels of the Splitter lead to these glowing discs of EL Tape that give your costume and authentic Tron look

Its not complicated or fiddly - we've just given all those details if you want to plan your costume before you buy the set - feel free to message us if you have any questions.

OR CONTACT US IF YOU WANT ADVICE PLANNING YOUR SET

We have some crazy glowing masks & glasses that go well with this kit - take a look!

This EL Tape comes with a standard connector so simply plugs into any EL inverter - this makes it easy to change between coloured wire on one inverter.

By using splitters you can also connect different strands to the same Inverter / Driver

USB Rechargeable 3000mAh Li-ion Battery

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

(*Li-ion Batteries are only available to the UK due to airmail postal restrictions)

These Rechargeable Batteries have been designed to work with our USB EL Drivers

but will supply power to any device that has a USB input

These Li-ion Batteries can recharged using any USB port.

This battery back weighs 74 grams and is 71mm x 44mm x 8mm (L x W x H).

SPECS:

Capacity: 3000mAh

Input power: DC 5.2V

Output: DC 4.5V - 5.2V

Over-charge / discharge protection: Yes