Adaptable Driver for 5-15m (Flashing Option)

This handy item is a 12v driver with a variety of power inputs that will run between 5 and 15 meters of EL Wire.

The Driver has a switch on the side with 3 different positions Off - Flash - Continuous On.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of power supplies (Mains, Batteries, Direct 12V etc)

The size of the Driver is: 5cm x 3.2cm x 2.8cm and weighs 61g.

Using splitters, this Driver can run as many strands as you like as long as the total is under 15 metres.

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver.

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once.

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Adaptable Driver for 5-15m (Trigger Switch)

This is a super adaptable EL Driver which will run from 5 to 15 metres of EL wire or 100 - 350squ cm of EL Tape or Panel

It DOES NOT have a flashing function - but has a Trigger Switch on the end of a 1.2metre cable.

For portable uses, this allows the unit to be held on the body while the switch runs down the sleeve to the hand. For other uses, it allows the driver to be mounted somewhere pretty far from the switch. The switch will latch on when fully pressed down, press for a second time and the switch will latch off.

It is similar to the Water Resistant 5-15m Adaptable Driver, but is boxed differently and not potted in resin making it lighter (and therefore more popular as a portable driver)

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12v etc)

Its dimensions are: 5.2cm x 3.2cm x 2.8cm (L x W x H) and weighs 61g.

EL Driver Options:

We have found it is impossible to guess how you will be using our EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exceptions as it also has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters, or will you be cutting off the connector and using the bare wires?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

You can use this Remote Control Unit by plugging the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket.

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a clichÃ© to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message me with any questions

CHASING Driver for 5 - 15m

This adaptable EL Driver only works for CHASING EL Wire

With this Driver you can adjust the speed of the chasing wire

It is a powerful driver and is suitable for 5m - 15m of standard Chasing EL Wire or 5m ULTRA Chasing EL Wire
It DOES NOT have an On /Off Switch and will switch on as soon as it is connected to a power source.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12V etc)

Its dimensions are: 5cm x 4cm x 4cm (L x W x H) and weighs 80g.

Instructions:

1. Switch On, (to first position), ensuring that you have the EL Wire attached, as not having it attached when switching the Driver on can burn the Driver out.
2. The first position is ON and normal chasing speed.
3. Slide the switch to the last position and the Chasing EL Wire will move between speeding up and slowing down.
4. Watch the speed and when you see the speed that you want the EL Wire to chase at, move the switch back to the first position and it will lock the speed you want to use.

This Driver does have an On/Off Switch

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it also has a range of power inputs that hopefully cover most uses:

1) ONLY THE DRIVER

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

1m extender for 12v

you can use this 1m Extender by connecting the extender between the Power Source and the Driver

The 1m Extender is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

Remote Control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Sound Activated Driver for 5 - 20m

This is a Sound Activated Driver that's part of our Adaptable range so it has a number of power supplies available

The Driver will run between 5 and 20 metres of EL Wire and will light up reacting to sound. There is a sensitivity dial for the Sound Activated response

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of power supplies (Mains, Batteries, Direct 12V etc)

Its dimensions are:8cm x 5cm x 3cm (L x W x H) and weighs 79g.

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it also has a range of power inputs that hopefully cover most uses:

1) ONLY THE DRIVER

If you have your own 12V 5.5mm/2.1mm input you want to use or you may be using the 2 way power supply splitter that lets you use 2 drivers off one battery (available below)

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

*If you want more than one of the power connector mentioned above for your EL Driver, then just click on one of the descriptions and it should take you to a page where you can buy just the power connector on its own*

Remote Control

You can use this Remote Control Unit by placing the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the image to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow-stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message me with any questions

Adaptable Driver for 10 - 40m (Flashing Option)

This adaptable EL Driver will run between 10 and 40 metres of EL Wire or 150 - 600 square cm (A4) of EL Panel or EL Tape.
It has a flashing option.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of power supplies (Mains, Batteries, Direct 12V etc)

Its dimensions are: 8cm x 5cm x 3.2cm (L x W x H)

Weight: 130g

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it also has a range of power inputs that hopefully cover most uses:

1) ONLY THE DRIVER

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent charger as standard.

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

LED emitters (3mm) with a choice of 6 vivid colours and power supply

These high quality LED emitters are super bright and even noticeably glow in daylight. They can be powered with a variety of our 12V power sources - just plug the power source in and let your creativity loose.

This LED emitter is compatible with 3mm diameter LED fibre optic lighting cable.

This very versatile light source is available in 6 vivid colours: Light Blue, Pink, Red, Orange, Green and White

You can join them together using our 12V LED power supply splitters.

3 way splitter for 12V LED power supply

LED's would usually need a controller, these have one already built in.

We have multiple power source options available:

1) Crocodile Clips

Perfect if you already have your own 12V battery to run these LED emitters.

2) 8 x AA Battery Box

This 8 x AA Battery Box will plug straight into the emitter. It is fairly large (127mm x 72mm x 19mm) but will make these LED emitters portable.

3) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into these LED emitters. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make the emitter portable.

4) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

5) Mains Powered

This handy PSU can be used to power these LED emitters off of Mains Electricity (UK, US or EU plugs are available)

6) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

Adaptable Driver for 10-40m (Trigger Switch)

This adaptable EL Driver will run between 10 and 40 meters of EL Wire and 150 - 600 square cm (A4) of EL Panel or EL Tape.
It DOES NOT have a flashing function - but has a Trigger Switch on the end of a 1.2metre cable.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of power supplies (Mains, Batteries, Direct 12V etc)

Its dimensions are: 8cm x 5cm x 3.2cm (L x W x H) and weighs 130g.

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it also has a range of power inputs that hopefully cover most uses:

1) ONLY THE DRIVER

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (thin): 125g (10cm x 5.5cm x 0.8cm)

1800mAh (square): 125g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 250g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

You can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several drivers at once.

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Adaptable Driver for 20 - 60m

This handy item is an adaptable driver which will run between 20 and 60 metres of EL Wire.

Running any less wire than 20m will reduce the lifespan of the wire and strain this driver as it is being overpowered.

The Driver has a switch on the back for either continuous ON or Flashing

The size of the Driver is: 12cm x 6.5cm x 3cm and weighs 222g.

This is a very powerful inverter that not only runs very long lengths of EL Wire but does so much brighter than most other drivers!

Using splitters it can run as many strands as you like as long as the total is under 60 metres

1) ONLY THE DRIVER

maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power supply like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Mini LED Controller

This mini LED Controller is just 4cm long and less than 1cm wide
Yet it still has a variety of functions
There are 20 different colour settings and each of these can be set to a choice of 5 brightnesses
Also, you can choose from a range of Flashing, Strobing and Fading effects and each of these can be set to one of 5 speeds
All the controls you could possibly need for an LED strip are squeezed into this little device

The controller is compatible with 4-pin RGB SMD 5050 LED Strips and LED Blocks
you can choose which of these you prefer here:

[one_third]

LED STRIPS

[/one_third] [one_third]

TRIPLE LED BLOCKS

[/one_third] [one_third_last]

QUAD LED BLOCKS

[/one_third_last]

You can join the LED Strips directly onto each other, or use LED Splitters or LED Extenders to get the LEDs exactly where you want

Compared to EL Wire, LEDs' are much more power hungry and must be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V source

The Controller has a 5.5mm Jack Plug so you can swap between any of these power inputs.

IR Remote and Controller for LED

This is a selection of LED Controllers with an Infra Red Remote so it will remotely change the colour or pattern of the LEDs
These IR Remotes need a line of site to the pickup on the controller to let them work

There are several colour settings and each of these can be set to a choice of 5 brightnesses
Also you can chose from a range of Flashing, Strobing and Fading effects and each of these can be set to one of 5 speeds
All the controls you could possibly need for an LED strip are squeezed into these remote control units

The controller is compatible with 4-pin RGB SMD 5050 LED Strips and LED Blocks
you can choose which of these you prefer here:

[one_third]

LED STRIPS

[/one_third] [one_third]

TRIPLE LED BLOCKS

[/one_third] [one_third_last]

QUAD LED BLOCKS

[/one_third_last]

You can join the LED Strips directly onto each other, or use LED Splitters or LED Extenders to get the LEDs exactly where you want

Compared to EL Wire, LEDs' are much more power hungry and must be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V source

The Controller has a 5.5mm Jack Plug so you can swap between any of these power inputs

IR Remote and Sound Activated Controller for LED

This LED Controller with an Infra Red Remote and sound activation will remotely change the colour or pattern of the LEDs
This IR Remote need a line of site to the pickup on the controller to let them work

There are several colour settings on this controller and can be set to a choice of 5 brightnesses
You can also choose from a range of Sound Activated, Flashing, Strobing and Fading effects and each of these can be set to one of 5 speeds
All the controls you could possibly need for an LED strip are squeezed into this remote control unit

The controller is compatible with 4-pin RGB SMD 5050 LED Strips and LED Blocks
you can choose which of these you prefer here:
[one_third]

LED STRIPS

[/one_third] [one_third]

TRIPLE LED BLOCKS

[/one_third] [one_third_last]

QUAD LED BLOCKS

[/one_third_last]

You can join the LED Strips directly onto each other, or use LED Splitters or LED Extenders to get the LEDs exactly where you want

Compared to EL Wire, LEDs' are much more power hungry and must be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V source

The Controller has a 5.5mm Jack Plug so you can swap between any of these power inputs

RF Remote and Controller for LED

This is an LED Controller with a Radio Frequency Remote so it will remotely change the colour or pattern of the LEDs from up to 10 metres away and does not need a line of site (unlike the IR Remote)

There are 8 different colour settings and each of these can be set to a choice of 5 brightnesses
Also, you can choose from a range of Flashing, Strobing and Fading effects and each of these can be set to one of 5 speeds
All the controls you could possibly need for an LED strip are squeezed into this little remote control unit

The controller is compatible with 4-pin RGB SMD 5050 LED Strips and LED Blocks
you can choose which of these you prefer here:

[one_third]

LED STRIPS

[/one_third] [one_third]

TRIPLE LED BLOCKS

[/one_third] [one_third_last]

QUAD LED BLOCKS

[/one_third_last]

You can join the LED Strips directly onto each other, or use LED Splitters or LED Extenders to get the LEDs exactly where you want

Compared to EL Wire, LEDs' are much more power hungry and must be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V source

The Controller has a 5.5mm Jack Plug so you can swap between any of these power inputs.

Adaptable Driver for up to 5m EL Wire (Water Resistant)

This is a super adaptable EL Driver which will run up to 5 metres of EL wire or 150squ cm of EL Tapes or EL Panels.

It DOES NOT have a flashing function - but comes with the option of an On/Off 'Plunger Switch'. The switch will latch on when fully pressed down, press for a second time and the switch will latch off.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12V etc)

It has two integral screw fixing points on either side of it so it can be fastened down.

It has a water-tight seal all round it including where the wires come in and out of it. Attached in a sensible place it should withstand all types of weather

Its dimensions are: 29mm x 19mm x 24mm (L x W x H)

The screw fixing tabs stick out 6mm each on the 29mm side and could easily be cut off if space is vital. The Driver weighs 25g.

EL Driver Options:

This EL Driver comes either with or without an On/Off switch.

Without a switch it will draw power whenever it is connected to a power source

Or It has a Trigger Switch on the end of a 1.2metre cable. For portable uses, this allows the unit to be held on the body while the switch runs down the sleeve to the hand. For other uses, it allows the driver to be mounted somewhere pretty far from the switch

This Driver has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters, or will you be cutting off the connector and using the bare wires?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (127mm x 72mm x 19mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger, unless you choose 'No Charger'.

6) Mains Powered

This handy PSU can be used to make this EL Driver powered by Mains Electricity (UK, US or Eu plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories.

8) Self Stripping Wire Connectors (2)

This Driver is perfect for using when decorating your car with EL Wire.

An incredibly simple way to join the wires into your 12V loom is using these Self Stripping Wire Connectors (pack of 2)

9) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

EL wire has loads of uses, this neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats.

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message me with any questions.

Adaptable Driver for 5-15m EL Wire (Water Resistant)

This is a super adaptable EL Driver which will run from 5 to 15 metres of EL wire or 50 - 300squ cm of EL Tapes or Panels.

It DOES NOT have a flashing function - but comes with the option of an On/Off Plunger Switch. The switch will latch on when fully pressed down, press for a second time and the switch will latch off.

As explained in detail below, these Adaptable Drivers are very versatile and have a whole selection of Power inputs; Mains, Batteries, Direct 12V etc...

It has two integral screw fixing points on either side of it so it can be fastened down.

It also has a water-tight seal, all workings have been in-filled with epoxy resin, including where the wires come in and out of the Driver. Situated in a sensible place it should withstand all types of weather.

Its dimensions are: 4cm x 3.2cm x 3cm (L x W x H). The screw fixing tabs stick out 6mm each on the 29mm side and could easily be cut off if space is vital. The Driver weighs 85g.

EL Driver Options:

This EL Driver comes either with or without an On/Off Plunger (Trigger) Switch.

Without a switch it will draw power whenever it is connected to a power source

Or It has a Trigger Switch on the end of a 1.2 metre cable. For portable use, this allows the unit to be held on the body while the switch runs down the sleeve to the hand. For other uses, it allows the driver to be mounted somewhere pretty far from the switch

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it also has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters, or will you be cutting off the connector and using the bare wires?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (127mm x 72mm x 19mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent 1A recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered from Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) Self Stripping Wire Connectors (2)

This Driver is perfect for using when decorating your car with EL Wire.

An incredibly simple way to join the wires into your 12V loom is using these Self Stripping Wire Connectors (pack of 2)

9) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector already attached so they plug straight into the Driver*

EL wire has loads of uses

This Neon Wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message our team with any questions you may have.

Adaptable Driver for 5-15m EL Wire - Flashing Option

This handy item is a 12v driver with a variety of power inputs that will run between 5 and 15 metres of EL Wire.

The Driver has a switch on the side with 3 different positions Off - Flash - Continuous On.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12V etc)

The size of the Driver is: 5.4cm x 3.4cm x 2.9cm and weighs 61g.

Using splitters, this Driver can run as many strands as you like as long as the total is under 15 metres.

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (127mm x 72mm x 19mm) but will make this EL Driver portable.

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or EU plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

You can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver.

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once.

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver

EL wire has loads of uses!

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Adaptable Driver for 5-15m EL Wire (with Trigger Switch)

This is a super adaptable EL Driver which will run from 5 to 15 metres of EL wire or 100 - 350squ cm of EL Tape or Panel

It DOES NOT have a flashing function - but has a Trigger Switch on the end of a 1.2 metre cable.

It is similar to the Water Resistant 5-15m Adaptable Driver, but is boxed differently and not potted in resin making it lighter (and therefore more popular as a portable driver)

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12v etc)

Its dimensions are: 5.3cm x 3.4cm x 2.9cm (L x W x H) and weighs 61g.

EL Driver Options:

We have found it is impossible to guess how you will be using our EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exceptions as it also has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters, or will you be cutting off the connector and using the bare wires?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

3) 8xAA Battery Box

This 8xAA Battery Box will plug straight into the driver. It is fairly large (127mm x 72mm x 19mm) but will make this EL Driver portable

4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make this EL Driver portable.

5) Rechargeable Li-ion Battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)

1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

6) Mains Powered

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

8) 2 way Splitter for 12V Power Input (5.5mm)

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

Remote Control

You can use this Remote Control Unit by plugging the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket.

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions you may have.