LED emitters (3mm) with a choice of 6 vivid colours and power supply
These high quality LED emitters are super bright and even noticeably glow in daylight. They can be powered with a variety of our 12V power sources - just plug the power source in and let your creativity loose.
This LED emitter is compatible with 3mm diameter LED fibre optic lighting cable.
This very versatile light source is available in 6 vivid colours: Light Blue, Pink, Red, Orange, Green and White
You can join them together using our 12V LED power supply splitters.
3 way splitter for 12V LED power supply
LED's would usually need a controller, these have one already built in.
We have multiple power source options available:
1) Crocodile Clips
Perfect if you already have your own 12V battery to run these LED emitters.
2) 8 x AA Battery Box
This 8 x AA Battery Box will plug straight into the emitter. It is fairly large (127mm x 72mm x 19mm) but will make these LED emitters portable.
3) 3 x 18650 Rechargeable Battery Box
This 3 x 18650 Rechargeable Battery Box will plug straight into these LED emitters. It is fairly large (76mm x 60mm x 19mm) and the leads for the output are 15cm long but will make the emitter portable.
4) Rechargeable Li-ion Battery
Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes
1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)
1800mAh (square): 145g (5.6cm x 3.8cm x 3.1cm)
3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)
5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)
All of these Li-ion Batteries come with an intelligent recharger
5) Mains Powered
This handy PSU can be used to power these LED emitters off of Mains Electricity (UK, US or EU plugs are available)
6) Car Lighter Adaptor
This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories
This mini LED Controller is just 4cm long and less than 1cm wide
Yet it still has a variety of functions
There are 20 different colour settings and each of these can be set to a choice of 5 brightnesses
Also, you can choose from a range of Flashing, Strobing and Fading effects and each of these can be set to one of 5 speeds
All the controls you could possibly need for an LED strip are squeezed into this little device
The controller is compatible with 4-pin RGB SMD 5050 LED Strips and LED Blocks
you can choose which of these you prefer here:
[one_third]
LED STRIPS
[/one_third]
[one_third]
TRIPLE LED BLOCKS
[/one_third]
[one_third_last]
QUAD LED BLOCKS
[/one_third_last]
You can join the LED Strips directly onto each other, or use LED Splitters or LED Extenders to get the LEDs exactly where you want
Compared to EL Wire, LEDs' are much more power hungry and must be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V source
The Controller has a 5.5mm Jack Plug so you can swap between any of these power inputs.
IR Remote and Controller for LED
This is a selection of LED Controllers with an Infra Red Remote so it will remotely change the colour or pattern of the LEDs
These IR Remotes need a line of site to the pickup on the controller to let them work
There are several colour settings and each of these can be set to a choice of 5 brightnesses
Also you can chose from a range of Flashing, Strobing and Fading effects and each of these can be set to one of 5 speeds
All the controls you could possibly need for an LED strip are squeezed into these remote control units
The controller is compatible with 4-pin RGB SMD 5050 LED Strips and LED Blocks
you can choose which of these you prefer here:
[one_third]
LED STRIPS
[/one_third]
[one_third]
TRIPLE LED BLOCKS
[/one_third]
[one_third_last]
QUAD LED BLOCKS
[/one_third_last]
You can join the LED Strips directly onto each other, or use LED Splitters or LED Extenders to get the LEDs exactly where you want
Compared to EL Wire, LEDs' are much more power hungry and must be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V source
The Controller has a 5.5mm Jack Plug so you can swap between any of these power inputs
IR Remote and Sound Activated Controller for LED
This LED Controller with an Infra Red Remote and sound activation will remotely change the colour or pattern of the LEDs
This IR Remote need a line of site to the pickup on the controller to let them work
There are several colour settings on this controller and can be set to a choice of 5 brightnesses
You can also choose from a range of Sound Activated, Flashing, Strobing and Fading effects and each of these can be set to one of 5 speeds
All the controls you could possibly need for an LED strip are squeezed into this remote control unit
The controller is compatible with 4-pin RGB SMD 5050 LED Strips and LED Blocks
you can choose which of these you prefer here:
[one_third]
LED STRIPS
[/one_third]
[one_third]
TRIPLE LED BLOCKS
[/one_third]
[one_third_last]
QUAD LED BLOCKS
[/one_third_last]
You can join the LED Strips directly onto each other, or use LED Splitters or LED Extenders to get the LEDs exactly where you want
Compared to EL Wire, LEDs' are much more power hungry and must be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V source
The Controller has a 5.5mm Jack Plug so you can swap between any of these power inputs
RF Remote and Controller for LED
This is an LED Controller with a Radio Frequency Remote so it will remotely change the colour or pattern of the LEDs from up to 10 metres away and does not need a line of site (unlike the IR Remote)
There are 8 different colour settings and each of these can be set to a choice of 5 brightnesses
Also, you can choose from a range of Flashing, Strobing and Fading effects and each of these can be set to one of 5 speeds
All the controls you could possibly need for an LED strip are squeezed into this little remote control unit
The controller is compatible with 4-pin RGB SMD 5050 LED Strips and LED Blocks
you can choose which of these you prefer here:
[one_third]
LED STRIPS
[/one_third]
[one_third]
TRIPLE LED BLOCKS
[/one_third]
[one_third_last]
QUAD LED BLOCKS
[/one_third_last]
You can join the LED Strips directly onto each other, or use LED Splitters or LED Extenders to get the LEDs exactly where you want
Compared to EL Wire, LEDs' are much more power hungry and must be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V source
The Controller has a 5.5mm Jack Plug so you can swap between any of these power inputs.
LED Remote with Multiple Controllers
This remote control system is perfect if you need to change the LEDs on several controllers at once
Ideal for Dance groups or if you want to co-ordinate the lighting in a room, or even a whole house
Despite its simple and sleek design, the LED Remote can:
1) Instantly change the colour and brightness of the LEDs on as many Controllers within it's 30 metre range
2) Start and Stop the Flashing, Strobing or Phasing of LEDs on these Controllers as well as changing the speeds of these effects
3) Divide these LED Controllers into separate groups, each of them adjustable and controllable in real time
There are 20 different colour settings and each of these can be set to a choice of 5 brightnesses
Also, you can choose from a range of Flashing, Strobing and Fading effects and each of these can be set to one of 5 speeds
The controller is compatible with 4-pin RGB SMD 5050 LED Strips and LED Blocks
you can choose which of these you prefer here:
[one_third]
LED STRIPS
[/one_third]
[one_third]
TRIPLE LED BLOCKS
[/one_third]
[one_third_last]
QUAD LED BLOCKS
[/one_third_last]
You can join the LED Strips directly onto each other, or use LED Splitters or LED Extenders to get the LEDs exactly where you want
Compared to EL Wire, LEDs' are much more power hungry and must be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V source
The Controller has a 5.5mm Jack Plug so you can swap between any of these power inputs.