Clu Simple EL Panel Front + Back + Driver

This listing is for:

1) One piece of Clu shaped EL Panel to run up one side of the chest

2) A 6cm EL Hoop to go on the shoulder at the top of the curved piece

3) 2 x Double hoops for the waist

4) A 14cm EL Tape Tron Identity Disc

5) A Powerful 8 x AA battery EL Driver or rechargeable 3000mAh Li-ion Driver.

6) 1 x 3-way splitter, 2 x mini 2-way splitter, and a 50cm extender wire - these make the whole set a simple 'plug and play'

8) 1 metre of Velcro - with sticky hoop and sewable loop to make it easy to attach the set to a costume and have it removable

The whole kit is ready to use - just plug and play!

Dimensions of the products:

If you are making a costume, it is a good idea to plan it out properly.

For this set, the driver/inverter is very powerful and comes with a separate power pack

So here are the dimensions of all the parts plus lengths of wire between them.

Feel free to message us if you have any questions

THE POWER PACK*

Takes 8 x AA batteries (not supplied) and is 12.7cm x 7.02cm x 1.9cm and has a 19cm thin power wire coming out of it that leads to the driver.

DRIVER

The driver is 8cm x 5cm x 3.2cm and has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The 3-way Splitter is 40cm long in total, it is 20cm of wire which then splits into 3 separate strands which are all 20cm long

2 of the 3 channels lead to the front of the costume, one to the Right and the other to the Left

Front Right

A mini 2-way splitter plugs into a 6cm EL Hoop, and one of the Double Hoops

Sticky back Velcro is supplied that is the exact width of the EL Tape - be careful putting it on as that glue is VERY sticky

You must sew the other part of the Velcro onto the costume making it very convenient to attach and remove

Of course, you don't need to use the Velcro and can fix it any way you choose

Front Left

Here a mini 2-way splitter is plugged into the Clu shape EL Panel and the other Double Hoop

It is best to plug the 50cm extender into the 3rd channel off the main 3-way splitter which then leads to the...

EL Identity Disc

This Large El Hoop is 14cm in diameter, there are two thin EL Tapes running in concentric circles and the inner diameter is just over 9cm across

SPLITTERS

This is how we recommend using the splitters:

A 3-way splitter coming straight from the driver - one channel leads to a mini-2way splitter for the Front Right of the costume

- another channel leads to a mini 2-way splitter for the Front Left

- the last channel plugs into a 50cm extender and powers the ID disc at the back of the costume

* all powered by a 8XAA battery pack

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set - feel free to message me if you have any questions

The whole kit is ready to use - just plug and play!

OR CONTACT US IF YOU WANT ADVICE PLANNING YOUR SET

We have some crazy glowing masks & glasses that go well with this kit - take a look!

New Tron Ares Replica Light Set

Based on trailers and photos from the set we have created this glowing EL Wire set or the new Tron: Ares movie

we just supply a plug and play glowing el panels and battery pack with velcro to help attach these to your own clothing costume

most of the pieces fit on the front, with the hexagonal ID disc on the back,

red light bolts down the sleeve

and two red light bolts for the legs

(of course you can arrange them in any position you want)

This listing is for:

1) A Hexagonal ID Disc for the back of the costume - 7.5 inch wide (19cm)

2) 2 x hoop and line that run over the shoulders - 7 inches long (18cm)

3) 2 x Shoulder Curves for the top of the chest - 8 inches long(20cm)

4) small square tag t go in the mid collar at the front 1.5inch by 3/4 inch (1.5cm x 3.5cm)

5) large 'n' shape for mid chest - 4.5cm high x 4inch wide (12cm x 10cm)

6) 2 x straight pieces with curved edges - 5 inches long (12.5cm)

7) 6 x red light blot shapes fr the arms and legs - 6 inches long (15cm)

8) 1 x 3 way splitter, 1 x 4-way splitter, 2 x 5-way splitter, 1 x 6-way splitter, and 2 x 50cm extender wire - these make the whole set a simple 'plug and play'

9) 1.5 metre of Velcro - with sticky hoop and sewable loop to make it easy to attach the set to a costume and have it removable

The whole kit is ready to use - just plug and play!

Dimensions of the products:

If you are making a costume, it is a good idea to plan it out properly.

For this set, the driver/inverter is very powerful and comes with a separate power pack

So here are the dimensions of all the parts plus lengths of wire between them.

Feel free to message us if you have any questions

THE POWER PACK*

Takes 8 x AA batteries (not supplied) and is 12.7cm x 7.02cm x 1.9cm and has a 19cm thin power wire coming out of it that leads to the driver.

DRIVER

The driver is 8cm x 5cm x 3.2cm and has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The main 5-way Splitter is 40cm long in total, it is 20cm of wire which then splits into 5 separate strands which are all 20cm long

the first channel goes to the the back and attaches to a 3 way splitter

this is for the HEX ID Disk and the 2 x Hoops with a Line that run over the shoulders

the second channel is for the chest and attaches to a 5 way splitter

this is for the collar tag, 2 x shoulder curves, the 'n' piece and the 2 x straight pieces

the third channel goes down to the legs and attaches to a 4 way splitter

this is for 4 of the red light bolt shapes

the fourth and fifth channel have 50cm extenders on them that go onto the last red light bolt pieces

one for each arm

* all powered by a 8XAA battery pack

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set - feel free to message me if you have any questions

The whole kit is ready to use - just plug and play!

OR CONTACT US IF YOU WANT ADVICE PLANNING YOUR SET

We have some crazy glowing masks & glasses that go well with this kit - take a look!

EL Wire Sample Packs

So you've not used or seen Electroluminescent Wire before and you are curious to see what the colours are like in the different types and thicknesses and what you can do with it.

The beauty of EL Wire is its easy to use and comes ready to plug and play. Our samples packs have a good selection of EL Wire in all its different forms and colours.

Choose from the drop down menu:

1) All Blue - Mix of Types
Choose this option if you want try out our Blue wires, and we will send you a selection of different wires and diameters

In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in Light Blue
2) 1 x 1m length of 2.3mm EL Wire in Light Blue
3) 2 x 50cm lengths of 3.2mm EL Wire in Light Blue and Deep Blue
4) 1 x 1m length of 5mm EL Wire in Light Blue
5) 2 x 50cm length of Sewable EL Wire in Light Blue and Deep Blue
6) 1 x 1m length of Stiff EL Wire in Aqua
7) 2 x 50cm lengths of Maxi EL Wire in Blue and Purple (this has a blue tone to it)
8) 1 x 2 x 12cm length of Light Blue EL Tape
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black.

2) All White - Mix of Types
Choose this option if you want try out our White wires, and we will send you a selection of different wires and diameters.

In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in White
2) 1 x 1m length of 2.3mm EL Wire in White
3) 1 x 1m length of 3.2mm EL Wire in White
4) 1 x 1m length of 5mm EL Wire in White
5) 1 x 1m length of Sewable EL Wire in White
6) 1 x 1m length of Stiff EL Wire in White
7) 1 x 1m length of Maxi EL Wire in White
8) 1 x 2 x 12cm EL Tape in White
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black

3) Mixture of all Colours and Types
Choose this option if you want try out all of our colours, and we will send you a selection of different wires and diameters

In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in White
2) 1 x 1m length of 2.3mm EL Wire in Red
3) 1 x 1m length of 3.2mm EL Wire in Light Blue
4) 1 x 1m length of 5mm EL Wire in Orange
5) 1 x 1m length of Sewable EL Wire in Yellow
6) 1 x 1m length of Stiff EL Wire in Lime
7) 1 x 1m length of Maxi EL Wire in Pink
8) 1 x 2 x 12cm EL Tape in Light Blue
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black

Our wires are available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green and White

Our wires are available in any of these types: 1.0mm, 1.5mm, 2.3mm, 3.2mm, 5mm, Stiff, Ultra and sewable

All of our sample packs come with:

1) 5-15m adaptable driver with (mains plug- relevant to your location) (email us - if you would like a battery option)

2) Splitters to 'drive' all the wires at the same time.

3) 2 x 12cm EL Panel

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White.

The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector attached and so is ready to clip into an EL Driver.

A wide selection of other EL Tape, EL Panels, Sequencers, Drivers and helpful EL accessories are available from our store

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH OF EL WIRE LISTED AS WE TAKE CUSTOM ORDERS - TPLEASE BE AWARE THERE IS A MINIMUM ORDER REQUIREMENT FOR CUSTOM ORDERS.

EL wire has loads of uses

It has an amazing neon string effect when decorating the interior or exterior of the home, cars, motorbikes, bicycles and trailers. It can be used to make faux neon signs and attached to costumes and even be threaded into clothes and hats. It can be used as safety lighting and mood lighting.

Glowing Christmas Jumper Set

Turn any ordinary jumper into a glowing, flashing Christmas Jumper with this fantastic EL Panel Set.

With this set you get

1) 3 x Christmas Shapes,

2) 1 x slimline sequencer that takes 2 x AA batteries (not supplied)

3) Velcro for easy application

The glowing snowflakes and Christmas trees are made from light and flexible EL Panel that shine really brightly

Converting your jumper is simple:

1) Make 3 small (1/2cm) holes in the jumper (on a loose knit jumper you do not need to make holes, as you can poke the wires through the weave)

2) Push the connector lead on each of the panels through the holes and connect to the sequencer.

3) We supply Velcro which can be sewn or glued to the jumper and also sticks to the back of the shapes to completely hold them in place. (not necessary, but recommended)

4) The Sequencer has a belt clip or can be put in the pocket. It has an adjustable dial so you can change the speed at which they rotate through.

You will get a choice of colours and shapes (White, Blue or Pink Snowflake and a Green Xmas Tree) .

Use the drop down menu above to choose the best one for you

(please note: jumper and batteries are not included)

The shapes will rotate through this sequence:

The speed of the sequence is adjustable:

Use this dial to change the speed, or press the mode button to turn it continuous on or switch it off:

Take a browse in our store where you will find many items that would also complement this Christmas Gift Set.

We have plenty of other shapes as well as glowing EL Wire that will fit in with the same connectors.

There are also splitters if you want to add more items to your Xmas Jumper creation

- - - - - - - - - - - -

GLOWING LETTERS EL Panel Alphabet

These glowing EL Letters are thinner than a credit card and glow amazingly bright

They have many uses from advertising signs or maybe you want an original way to have your kids names on a bedroom door

Each letter is just over 4cm high and just under 4cm wide

Here is the available letters we have:

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

1 2 3 4 5 6 7 8 9 0

! ? £ $ @ +

Light Blue EL Letters

As these are made with EL Panels then they need an EL Driver to make them glow

You may already have an EL Driver and be adding these letters in which case you can choose 'NO DRIVER'

This set has the option of 6 different types of Driver

Mini Driver = for 1-6 EL Letters

Basic (2xAA) Driver = for 1-15 EL Letters

8xAA Driver= 10-50 EL Letters

Mains Driver = 10-50 EL Letters

Sound Activated Driver = 1-10 EL Letters

Sound Activated + Portable (8xAA) Driver = 25-50 EL Letters

Please choose how many EL Letters you want and your Driver selection in the drop down menu

We have a huge selection of different Drivers, Sound Activated and Sequencers in stock that will all work with these EL Letters

To work out which driver is best, you could consider each EL Letter is equal to around 25cm of EL Wire

e.g. if an EL Driver is rated for 1 metre of EL Wire, then it will power four EL Letters

White EL Letters

These EL letters are currently available in: White, Light Blue and Red

Please choose which colour you would like and how many letters you will need

You will have to send us a message with your choice of letters either by 'add a message' on the PayPal page when you make payment or click here to email us your choice.

However, many EL Letters you choose we will include a 'Splitter' to bring them all together to use with a single Driver.

Red EL Letters

EL Panels and Tapes are an incredibly versatile material that can be wrapped around things.

You can join loads of them together using 'Splitters' and it can even have holes and shapes punched into it and be cut into your chosen shapes.

Basic EL Wire Set = 3 x 1 metre EL Wire + Driver

3 x 1 Metre of EL Wire, Splitter and Portable Driver for up to 5 metres of EL Wire.

This listing is for:

1) 3 x 1 metre of high quality (3.2mm) Electroluminescent Wire
2) 2 x AA portable Driver (with Flash)
3) Standard 3 way Splitter

The splitter lets you have 3 x 1 metre lengths of EL Wire attached to one driver/inverter - This gives you greater control and flexibility in the design of your costume.

4) 30 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

The EL Wire can be any combination of these colours:

Light Blue, Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White

The 3.2mm diameter EL Wire is one of our brightest!

To make it easier to design your outfit, below are the dimensions of the inverters and lengths of connecting wires - there are also tips on how to create your costume.

POWER PACK / INVERTER (Driver)

The Power Pack takes 2 x AA batteries and has a built-in voltage inverter that 'inverts' the 3Volts from the batteries up to the 100Volts needed to make the EL Wire glow.

The power pack/inverter dimensions are: 9cm x 3.2cm x 2cm

It has the following controls: On / Flash / Strobe / Off

It has an 8cm wire coming out of it that leads to the...

SPLITTER: The Splitter is 40cm long in total; it is 20cm of wire which then splits into 3 separate strands which are all 20cm long and lead to the...

EL WIRE

There is then another 20-25cm from the connector until the actual glowing start of EL Wire - then there are 3 x 1 metre lengths of gorgeous glowing wire!

Its not complicated or fiddly

This set can turn some clothing into a Tron fancy dress in many ways:

1 metre goes down each arm and

1 metre for the front of the costume

1 metre can go across the back and part way down the arm

1 metre to make a helmet

1 metre for the front of the costume

The whole kit is ready to use - just plug and play!

We have some crazy glowing masks & glasses that go well with this kit - take a look!

Detroit: Become Human Set

In this set is everything you need to turn into Kara, Connor or Markus

With this set you will get:

1) Two different 2cm flat glowing rings to go on the temple (one light blue, one red)

2) mini driver to power the small hoop

3) 2 x 7cm Triangles to attach to the outside of the cosplay outfit

4) 1 x 5cm x 35cm EL Tape to make a glowing armband

5) 50cm (1.5 foot) of El Wire to go round the collar

6) a portable driver that takes 8 x AA batteries to power the triangles, armband and EL Wire (and the temple hoop if desired)

7) splitters to easily join all the parts together

8) 50cm of sticky backed/sewable velcro so the armband and triangle can easily be attached to clothes

The whole of the set is plug and play, but you will need your own clothing to attach these pieces to

EL Wire Hoodie Set

In this set is everything you need to turn your own normal hoodie into a glowing EL Wire hoodie

With this set you will get:

1) 1.5 metres of 3.2mm EL Wire to outline the hoodie

2) Trigger Driver so you can switch from 'glow mode' to 'incognito' using a switch in your sleeve

3) 30 x Clear Hoops to make it easy to attach the EL Wire to the hoodie and also make it removable so you can put it through the washing machine

The EL Wire outline is in a selection of colours:
Light Blue (Tron Blue), Deep Blue, Pink, Purple, Orange, Red, Yellow, Lime Green, Grass Green and White

We have some crazy glowing masks and glasses that go well with this kit - take a look!

Simple Sign Making Kit

EL Wire is a perfect material for making glowing neon effect signs

We have made this even better by developing an EL wire that contains a thin metal rod that helps it hold its shape

So making your own sign has never been easier

With this set you will get:

1) 3 metres of specialist Stiff EL Wire to easily shape into your own design

2) EL Driver with plunger switch to power the wire and give you an accessible on/off switch

3) 3 x fixing ties to help hold your sign in place

4) 30cm of heat shrink which you can use to black out any non-lit portion of your sign

5) Instructions with tips to help you make your sign

The whole of the set is plug and play, but you will need your own backing material or wall to attach your sign too

Basic Dance Act EL Wire Set

Take Street Dance to a whole new level with this Glowing EL Wire Set

This set is for a 'plug and play' EL Wire and Driver - but you have to attach it to your own costume

With the set you get:

1) 5 pieces of 1 metre EL Wire in a choice of colours

2) A Trigger Driver that has a 1m long power wire that is able to run down the sleeve, allowing the performer to turn the lights on and off at will

This Driver takes 2 x AA batteries (not supplied) and is powerful enough for 5m of Standard EL Wire (2.5m of Ultra EL Wire)

EL Driver with long plunger trigger control

Trigger Driver for EL Wire

3) A long 2-way splitter and a standard 2-way and 3-way splitter

By 'daisy chaining' the splitters you can have all the lengths of EL Wire attached to this one driver

4) 30 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

The EL Wire can be any combination of these colours:
Light Blue (Tron Blue), Purple, Grass Green, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, and White

EL Wire Dance Act

The whole kit is ready to use - just plug and play!
We have some crazy glowing masks & glasses that go well with this kit - take a look!

Dance Act EL Wire Set = 12 metres of EL Wire + Trigger Driver

Take Street Dance to a whole new level with this Glowing EL Wire Set with a hand controller to switch the lights On and Off

This set is for a 'plug and play' EL Wire and Driver - but you have to attach it to your own costume

With the set you get:

1) 2 pieces of 3 metres EL Wire

2) 6 pieces of 1 metre EL Wire

3) A 'Dance Act' Driver that has a 1.2m long power cord that runs down the arm allowing the performer to turn the lights on and off at will

This driver is powerful enough to make up to 15 metres of EL Wire glow.

4) plus several splitters (3 x 2-way, 2 x 4-way, a spare 5-way and 2 x extenders)

By 'daisy chaining' the splitters you can have all the lengths of EL Wire attached to this one driver

5) 50 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

The EL Wire can be any combination of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Grass Green, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White

The whole kit is ready to use - just plug and play!

Our EL Wires in Action

Dimensions of the products:

If you are making a costume, it is important to plan it out properly.

For this Dance Act set, the driver is very powerful and so it comes with a separate power pack that takes 8 x AA batteries or a powerful rechargeable (3000mAh) Lithium-Ion Battery and battery charger (please choose the plug type you need)

So here are the dimensions of all the parts plus lengths of wire between them.

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 6.5cm x 6cm x 3cm

The Rechargeable Li-ion battery is smaller and lighter:

172g (7.3cm x 5.6cm x 2.2cm)

it has a 65cm thin power wire coming out of it that leads to the...

DRIVER

The driver is 6cm x 4cm x 4cm

It has a 1.2m long power lead coming out that ends with an ON/OFF plunger giving you the ability to control the light

It has a 55cm wire coming out of it that leads to a...

SPLITTER

The Splitters are 40cm long in total,

it is 20cm of wire which then splits into the separate strands which are all 20cm long

GLOWING EL WIRE
2 x 3 metres is for the body

6 x 1 metres is for the legs, arms and head

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set

EL Wire Dance Act

The whole kit is ready to use - just plug and play!
We have some crazy glowing masks & glasses that go well with this kit - take a look!

GLOWING STICKMAN SET = 7.5 metres EL Wire + Driver

1) 6 pieces of 1 metre 3.2mm EL Wire

2) 3 pieces of 50cm 3.2mm EL Wire

3) An EL Driver with either an 8 x AA Power Pack (batteries not supplied) or a rechargeable 3000mAh Li-ion battery (only available in the UK due to airmail postal restrictions)

This driver is powerful enough to glow up to 15 metres of EL Wire

4) 1 x Long 3 Way Splitter, 2 x 3 Way Splitter, 1 x Mini 5 Way Splitter and for the head, a Mini 3 Way Splitter and a 50cm Extender

By 'daisy chaining' the Splitters you can have all 9 metres of EL Wire attached to this one driver/inverter

5) 50 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

The EL Wire can be any combination of these colours:

Light Blue, Lime Green, Pink, Red, Orange, Purple, Yellow, Deep Blue, Turquoise-Green and White

The whole kit is ready to use - just plug and play!

Here is the suggested layout

Dimensions of the products:

If you are making a costume it is important to plan it out properly.

For this glowing man set, the driver/inverter is very powerful and so it comes with a choice of separate power packs.

So here are the dimensions of all the parts plus lengths of wire between them.

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 12.7cm x 7.02cm x 1.9cm and has a 19cm thin power wire coming out of it that leads to the driver

A 3000mAh rechargeable Li-ion battery which weighs 172g and is 7.3cm x 5.6cm x 2.2cm. This option comes with a 1A intelligent charger. Due to airmail restrictions this is option is only available for UK delivery.

THE DRIVER

The driver is 5.4cm x 3.4cm x 2.9cm and has controls on it - Off, Flashing or On. It has a 55cm wire coming out of it that leads to the...

SPLITTER

The Splitter is 40cm long in total,

it is 20cm of wire which then splits into 3 separate strands which are all 20cm long and lead to the...

EL WIRE

There is then another 20-25cm from the connector until the actual glowing start of EL Wire - then there is 2 X 3metres of gorgeous glowing wire!

1 x 3 metre is for the body

1 x 3 metre is for the legs

ANOTHER SPLITTER!

leads to more...

EL WIRE

20-25cm from the connector until the glowing start of 3 x 50cm EL Wire

These are for the really fun part of designing the expression on the face of your stickman/girl

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set

The stickguys and stickgals in these pictures were designed by international party animal Jak Hammer and his amigos!
We have some crazy glowing masks & glasses that go well with this kit - take a look!

GLOWING STICKGIRL SET = 7.5 metres EL Wire + Driver

Turn yourself into a glowing stickgirl!

This set is for a 'plug and play' EL Wire and Driver - but you have to attach it to a costume

*see the diagram below for a suggested setup*

With the set you get:

1) 3 pieces of 1 metre 3.2mm EL Wire

2) 1 piece of 3 metre 3.2mm EL Wire

3) 3 pieces of 50cm 3.2mm EL Wire

4) An EL Driver with either an 8 x AA Power Pack (batteries not supplied) or a rechargeable 3000mAh Li-ion battery (only available in the UK due to airmail postal restrictions)

This driver is powerful enough to glow up to 15 metres of EL Wire

5) 1 x mini 3-way splitter, 1 x standard 3-way splitter, 1 x long 3-way splitter and 1 x 50cm extender

By 'daisy chaining' the splitters you can have all 9 metres of EL Wire attached to this one driver/inverter

6) 50 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

The EL Wire can be any combination of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White

The whole kit is ready to use - just plug and play!

Here is the suggested layout - the EL Wire is recommended to run all round the hem of a dress

Dimensions of the products:

If you are making a costume, it is important to plan it out properly.

For this glowing girl set, the driver is very powerful and so it comes with a choice of two different power packs.

So here are the dimensions of all the parts plus lengths of wire between them.

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 12.7cm x 7.02cm x 1.9cm and has a 21cm thin power wire coming out of it that leads to the driver

THE DRIVER

The driver is 5.4cm x 3.4cm x 2.9cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The Splitters are 40cm long in total,

it is 20cm of wire which then splits into 3 separate strands which are all 20cm long

The first has 3 channels and this splits off and lead to the...

EL WIRE

3 x 1 metre for the body

1 x 3 metres is for the skirt

3 x 50cm for the head - - This is the really fun part of designing the expression on the face of your stick man/girl

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set

The whole kit is ready to use - just plug and play!

CHASING EL Wire Set - 3 x 1 Metre of Chasing EL Wire + Driver

This 'Chasing' EL Driver is 9cm x 3.5cm x 2.3cm and takes 2 x AA batteries - batteries not supplied.

'Chasing' 3 Way Splitter - this is designed only to be used with chasing EL Wire and will not work with standard EL Wire

3 x 1 metres of Electroluminescent Wire with a chasing motion.

This Chasing EL Wire is very bright and the chasing motion looks amazing

The 3 Chasing wires can be placed in different parts of the body to give an amazing effect.

3 x 1m Chasing EL Wire, using just one Driver

EL Chasing Wire

It is available in any combination of these colours:

Light Blue (Tron Blue), Pink, Orange, Lime Green and Green

The wire has a special connector on it so does not clip into standard EL Wire connectors and needs a Chasing EL Wire Driver and special Chasing Splitter

This Chasing Wire is also available in 50cm, 1m, 3m, 5m and 10metre lengths.

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside of the home and can even be threaded into clothes and hats.

It is a cliché to say you are only limited by your imagination but with EL wire it is true.

If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions you may have.

Standard EL WIRE SET = 3 x 3m EL Wire + Driver

With this 'plug and play' set you get

1) 3 pieces of 3 metre 3.2mm EL Wire

2) An EL Driver with an 8 x AA Power Pack

This driver is powerful enough to glow up to 15 metres of EL Wire

3) A 3-way splitter plus an extender

By 'daisy chaining' the splitters you can have all 9 metres of EL Wire attached to this one driver/inverter

4) 30 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

The EL Wire comes in these choice of colours:

Purple, Light Blue, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green, and White

AND IS THE BRIGHTEST AVAILABLE 3.2mm WIRE!

The whole kit is ready to use - just plug and play!

Dimensions of the products:

If you are making a costume, it is important to plan it out properly.

For the standard set, the driver/inverter is very powerful and needs a separate power pack

(the basic kit uses a single power/inverter box not much bigger than 2 X AA batteries).

So here are the dimensions of all the parts plus lengths of wire between them.

Feel free to message me if you have any questions

THE POWER PACK

Takes 8 x AA batteries (batteries not supplied) and is 12.7cm x 7.2cm x 1.9cm

it has a 21cm thin power wire coming out of it that leads to the...

Driver

The driver is 6cm x 4cm x 4cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The Splitter is 40cm long in total,

it is 20cm of wire which then splits into 3 separate strands which are all 20cm long and lead to the...

EL WIRE

There is then another 20-25cm from the connector until the actual glowing start of EL Wire - then there is 3 x 3 metre lengths of gorgeous glowing wire!

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set

The whole kit is ready to use - just plug and play!
We have some crazy glowing masks and glasses that go well with this kit - take a look!

OR FEEL FREE LEAVE A MESSAGE OR CONTACT ME IF YOU WANT ADVICE

Light Painting Kit - Use EL Wire With a Camera

Light painting is a modern and evolving art form. New techniques and are being discovered and the effects are breathtaking
https://elwirecraft.co.uk/wp-admin/edit.php?post_type=product
If you want to unleash the creative potential of your camera with amazing results then maybe you could try your hand at light painting

With his kit you get

1) EL Driver

Based on a standard 2xAA EL Driver, but instead of a push button on the front scrolling through the settings there is a long 1metre (35inch) wire coming out of the driver that ends with an ON/OFF click plunger (the trigger)

2) EL Wire

5 pieces of robust 1m long 3.2mm diameter EL Wire in a choice of colours in any combination of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, yellow, Lime Green, Green and White

3) 5-way splitter

Allows you to have up to 5 pieces of EL Wire lit up by the driver at once.

Either message us with your choice of colours
or select one of these:
LAPOG = Lime, Light Blue, Purple, Orange and Green
LAPWB = Lime, Light Blue, Purple, White and Deep Blue
LARYB = Lime, Light Blue, Red, Yellow and Deep Blue
LARYP = Lime, Light Blue, Red, Yellow and Pink
LARYW = Lime, Light Blue, Red, Yellow and White

Good luck with your light painting experiments!