I already have a power supply

Use this option if you already have your own driver power supply.

I already have an EL driver

Use this option if you already have your own EL driver.

Mains PSU - UK mains to 12V

This is a plug that goes into the mains power and then converts the mains AC power to 12V DC which is what many of our EL Drivers are powered by.

Since EL Wire is very low power, we only have these power supply units that output a maximum of 1A.

These power supply units are recommended to be used with our adaptable drivers.

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

el wire and el tape

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

8 x AA Battery Box(1)

This handy item is an enclosed battery box that takes 8 x AA batteries (batteries not supplied) and gives an output of 12v.

*Please note this is just a battery box, IT IS NOT AN EL DRIVER/INVERTER. They are available as a power supply for our EL Drivers or EL Sequencers.*

The size of this power pack is:

127mm x 72mm x 19mm and the lead for the output is 17cm long with a 2.1mm/5.5mm plug on the end.

This is a useful item for when you need to power a 12v appliance that you want to make portable

REMEMBER:

Standard alkaline batteries are 1.5v each, so 8 of them will make 12v, however rechargeable batteries are only1.2v each, so 8 of them in this battery pack will only produce 9.6v.

- - - - - - - - - - - - - - - - - -

 These battery packs are used to power powerful driver/inverters for EL wire

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

el wire and el tape

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Adaptable Driver for 0 - 5m (Water Resistant)

This is a super adaptable EL Driver which will run up to 5meters of EL wire or 150squ cm of EL Tape or EL Panel

It DOES NOT have a flashing function - but comes with the option of an On/Off plunger switch. The switch will latch on when fully pressed down, press for a second time and the switch will latch off.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of power supplies (Mains, Batteries, Direct 12V etc)

It has two integral screw fixing points on either side of it so it can be fastened down.

It has a water-tight seal all round it including where the wires come in and out of it. Attached in a sensible place it should withstand all types of weather

Its dimensions are: 28mm x 18mm x 24mm (L x W x H)

The screw fixing tabs stick out 6mm each on the 29mm side and could easily be cut off if space is vital. The driver weighs 25g.

EL Driver Options:

This EL Driver comes either with or without an On/Off switch.

Without a switch it will draw power whenever it is connected to a power source

DRIVER WITHOUT SWITCH PIC - DRIVER WITH SWITCH PIC

Or It has a Trigger Switch on the end of a 1.2metre cable. For portable uses, this allows the unit to be held on the body while the switch runs down the sleeve to the hand. For other uses, it allows the driver to be mounted somewhere pretty far from the switch

 

This Driver has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

12v small adaptable driver

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters, or will you be cutting off the connector and using the bare wires?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

 

2) Crocodile Clips

crocodile clips

Perfect if you already have your own 12V battery to run this driver

 

3) 8xAA Battery Box

batterybox

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

 

4) 3 x 18650 Rechargeable Battery Box

batterybox

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

 

5) Rechargeable Li-ion Battery

rechargable li-ion battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

 

6) Mains Powered

mains PSU for EL Wire

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

 

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

 

8) Self Stripping Wire Connectors (2)

self stripping wire connectors 300

This Driver is perfect for using when decorating your car with EL Wire.

An incredibly simple way to join the wires into your 12V loom is using these Self Stripping Wire Connectors (pack of 2)

 

9) 2 way Splitter for 12V Power Input (5.5mm)

2 to 1 splitter for 12v 2.1mm 5.5mm adapter

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

 

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

 

Remote Control

12v remote control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

el wire and el tape

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message me with any questions.

3 x 18650 Battery Box(1)

This handy item is a battery box that takes 3 x 18650 batteries and gives an output of just under 12V

*Please note this is just a battery box IT IS NOT AN EL DRIVER/INVERTER. . They are available as a power supply for our EL Drivers or EL Sequencers.*

18650 batteries are the long round flat ended rechargeable 'INR' or 'IMR' batteries which have become popular since they are used in vaping rigs.

 

We have made this battery box to power the 12v EL Drivers and Sequencers,

The 18650 batteries are 3.7v each, so the power input from this Battery Box with 3 is a total of 11.1V

We have found this barely makes a difference when powering EL Drivers compared to the convenience of these rechargeable batteries

This Battery Box comes with a standard 2.1mm/5.5mm connector

 

The size of the Battery Box power pack is 75mm x 60mm x 20mm and the output lead is 250mm long.

- - - - - - - - - - - - - - - - - -

These battery packs are used to power powerful driver/inverters for EL wire

If you have never seen EL wire have a look at my other items - it is basically a thin cool glowing neon wire

el wire and el tape

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

Sound Activated Driver for 3 - 10m

This is a Sound Activated Driver that's part of our Adaptable range so it can accept a number of power supplies.

The Driver will make between 3m and 10 metres of EL Wire glow when reacting to sound, there is a sensitivity dial for control of the Sound Activated response.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power supplies, from mains, batteries to direct 12V etc.

Its dimensions are 6cm x 4cm x 2.5cm (L x W x H) and it has a weight of 38g.

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it also has a range of power supplies that hopefully cover most uses:

1) ONLY THE DRIVER

12v small adaptable driver

If you have your own 12V 5.5mm/2.1mm input you want to use or you may be using the 2 way power supply splitter that lets you use 2 drivers off one battery (available below)

 

2) Crocodile Clips

crocodile clips

Perfect if you already have your own 12V battery to run this driver

 

3) 8xAA Battery Box

batterybox

This 8 x AA Battery Box will plug straight into the driver. It is fairly large (126mm x 76mm x 19mm) but will make this EL Driver portable

 

 

4) 3 x 18650 Rechargeable Battery Box

batterybox

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (76mm x 60mm x 22mm) and the leads for the output are 15cm long but will make this EL Driver portable.

 

5) Rechargeable Li-ion Battery

rechargable li-ion battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 145g (10.3cm x 5.5cm x 1.1cm)

1800mAh (square): 122g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent charger as standard.

 

6) Mains Powered

mains PSU for EL Wire

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

 

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

 

9) 2 way Splitter for 12V Power Input (5.5mm)

2 to 1 splitter for 12v 2.1mm 5.5mm adapter

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

 

*If you want more than one of the power connector mentioned above for your EL Driver, then just click on one of the descriptions and it should take you to a page where you can buy just the power connector on its own*

 

Remote Control

12v remote control

You can use this Remote Control Unit by placing the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the image to get the full details of this handy EL Accessory and add it to your basket.

 

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

el wire and el tape

- - - - - - - - - - - -

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow-stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message me with any questions

Adaptable Driver for 5-15m (Flashing Option)

This handy item is a 12v driver with a variety of power inputs that will run between 5 and 15 meters of EL Wire.

The Driver has a switch on the side with 3 different positions Off - Flash - Continuous On.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of power supplies (Mains, Batteries, Direct 12V etc)

The size of the Driver is: 5cm x 3.2cm x 2.8cm and weighs 61g.

Using splitters, this Driver can run as many strands as you like as long as the total is under 15 metres.

 

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

5-15m inverter for EL Wire

maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

 

2) Crocodile Clips

crocodile clips

Perfect if you already have your own 12V battery to run this driver

 

3) 8xAA Battery Box

batterybox

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

 

4) 3 x 18650 Rechargeable Battery Box

batterybox

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

 

5) Rechargeable Li-ion Battery

rechargable li-ion battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

 

6) Mains Powered

mains PSU for EL Wire

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

 

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

 

8) 2 way Splitter for 12V Power Input (5.5mm)

2 to 1 splitter for 12v 2.1mm 5.5mm adapter

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

 

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

 

Remote Control

12v remote control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver.

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once.

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

el wire and el tape

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

1800mAh (Thin) Li-ion Battery

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

While trying out different battery systems we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

We have these batteries in 4 different sizes with the following weights and dimensions:

1800mAh (Square): 125g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

15Ah: 725g (14.0cm x 6.5cm x 4.7cm)

SPECS:

Capacity: 1800mAh, 3000mAh or 5000mAh

Input power: DC 12.6V

Output: DC 12V

Over-charge / discharge protection: Yes

AC Mains Chargers are available with UK plugs.

These Li-ion batteries are best charged with dedicated Li-ion Intelligent Chargers

The 15Ah has an overcharge protection up to 15A so can take a larger current draw

-

 

el wire and el tape

Adaptable Driver for 5-15m (Trigger Switch)

This is a super adaptable EL Driver which will run from 5 to 15 metres of EL wire or 100 - 350squ cm of EL Tape or Panel

It DOES NOT have a flashing function - but has a Trigger Switch on the end of a 1.2metre cable.

For portable uses, this allows the unit to be held on the body while the switch runs down the sleeve to the hand. For other uses, it allows the driver to be mounted somewhere pretty far from the switch. The switch will latch on when fully pressed down, press for a second time and the switch will latch off.

It is similar to the Water Resistant 5-15m Adaptable Driver, but is boxed differently and not potted in resin making it lighter (and therefore more popular as a portable driver)

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12v etc)

Its dimensions are: 5.2cm x 3.2cm x 2.8cm (L x W x H) and weighs 61g.

 

EL Driver Options:

We have found it is impossible to guess how you will be using our EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exceptions as it also has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

12v large adaptable el wire inverter

maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters, or will you be cutting off the connector and using the bare wires?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

 

2) Crocodile Clips

crocodile clips

Perfect if you already have your own 12V battery to run this driver

 

3) 8xAA Battery Box

batterybox

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

 

 

4) 3 x 18650 Rechargeable Battery Box

batterybox

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

 

5) Rechargeable Li-ion Battery

rechargable li-ion battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

 

6) Mains Powered

mains PSU for EL Wire

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

 

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

 

8) 2 way Splitter for 12V Power Input (5.5mm)

2 to 1 splitter for 12v 2.1mm 5.5mm adapter

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

 

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

 

Remote Control

12v remote control

You can use this Remote Control Unit by plugging the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket.

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

el wire and el tape

- - - - - - - - - - - -

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message me with any questions

No Li-ion Battery

If you already have a Li-ion battery charger, this option is for you.

Our rechargeable Li-ion batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

While trying out different battery systems, we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

We have these batteries in 4 different sizes:

1800mAh (Thin): 145g (10cm x 5.5cm x 1.1cm)

1800mAh (Square): 125g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

15Ah: 725g (14.0cm x 6.5cm x 4.7cm)

SPECS:

Capacity: 1800mAh, 3000mAh or 5000mAh

Input power: DC 12.6V

Output: DC 12V

Over-charge / discharge protection: Yes

 

-

 

el wire and el tape

No Li-ion Battery Charger

If you already have a dedicated intelligent Li-ion battery charger, this option is for you.

Our dedicated UK mains intelligent Li-ion battery chargers are available in 1A and 2A versions.

Specifications are:
1A
Input: 100 - 240V AC 0.8A 50/60hz.
Output: 12.6 V DC 1000mA

2A
Input: 100 - 240V AC 1A 50/60Hz
Output: 12.6V DC 2000mA
 

-

 

el wire and el tape

1800mAh (Square) Li-ion Battery

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

While trying out different battery systems we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

We have these batteries in 4 different sizes with the following weights and dimensions:

1800mAh (Square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

15Ah: 725g (14.0cm x 6.5cm x 4.7cm)

SPECS:

Capacity: 1800mAh, 3000mAh or 5000mAh

Input power: DC 12.6V

Output: DC 12V

Over-charge / discharge protection: Yes

AC Mains Chargers are available with a UK plug.

These Li-ion batteries are best charged with dedicated Li-ion Intelligent Chargers.

-

 

el wire and el tape

Adaptable Driver for 5-15m (Water Resistant)

This is a super adaptable EL Driver which will run from 5 to 15meters of EL wire or 70 - 350squ cm of EL Tape or Panel

It DOES NOT have a flashing function - but comes with the option of an On/Off plunger switch. The switch will latch on when fully pressed down, press for a second time and the switch will latch off.

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of power supplies (Mains, Batteries, Direct 12V etc)

It has two integral screw fixing points on either side of it so it can be fastened down

plus it has a water-tight seal all round it including where the wires come in and out of it. Attached in a sensible place it should withstand all types of weather

Its dimensions are: 4cm x 3.2cm x 3cm (L x W x H). The screw fixing tabs stick out 6mm each on the 29mm side and could easily be cut off if space is vital. The driver weighs 85g.

 

EL Driver Options:

This EL Driver comes either with or without an On/Off switch.

Without a switch it will draw power whenever it is connected to a power source

DRIVER WITHOUT SWITCH PIC - DRIVER WITH SWITCH PIC

Or It has a Trigger Switch on the end of a 1.2metre cable. For portable uses, this allows the unit to be held on the body while the switch runs down the sleeve to the hand. For other uses, it allows the driver to be mounted somewhere pretty far from the switch

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it also has a range of power inputs that cover most potential uses, please choose one of these from the drop-down menu:

1) ONLY THE DRIVER

12v small adaptable driver

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters, or will you be cutting off the connector and using the bare wires?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

 

2) Crocodile Clips

crocodile clips

Perfect if you already have your own 12V battery to run this driver

 

3) 8xAA Battery Box

batterybox

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

 

4) 3 x 18650 Rechargeable Battery Box

batterybox

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

 

5) Rechargeable Li-ion Battery

rechargable li-ion battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

 

6) Mains Powered

mains PSU for EL Wire

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

 

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

 

8) Self Stripping Wire Connectors (2)

self stripping wire connectors 300

This Driver is perfect for using when decorating your car with EL Wire.

An incredibly simple way to join the wires into your 12V loom is using these Self Stripping Wire Connectors (pack of 2)

 

9) 2 way Splitter for 12V Power Input (5.5mm)

2 to 1 splitter for 12v 2.1mm 5.5mm adapter

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

 

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

 

Remote Control

12v remote control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch different drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

el wire and el tape

- - - - - - - - - - - -

EL wire has loads of uses

This Neon Wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts around 5,000 hours

We're sure you will be amazed - feel free to message me with any questions

3000mAh Li-ion Battery

These batteries have been specially made for EL Wire Craft and are made with the highest quality Lithium Polymer technology.

While trying out different battery systems we found that many of them exaggerated the milliamp/Hour ratings. These batteries are within 10% of the rating at which they have been given.

They also feature overcharge protection.

They do not have their own on/off switch as we found this was unnecessary and just added another element that could fail.

We have these batteries in 4 different sizes with the following weights and dimensions:

1800mAh (Thin): 145g (10cm x 5.5cm x 1.1cm)

1800mAh (Square): 145g (5.6cm x 3.8cm x 3.1cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)

15Ah: 725g (14.0cm x 6.5cm x 4.7cm)

SPECS:

Capacity: 1800mAh, 3000mAh or 5000mAh

Input power: DC 12.6V

Output: DC 12V

Over-charge / discharge protection: Yes

AC Mains Charger: UK Plug

-

These Li-ion batteries are best charged with dedicated Li-ion Intelligent Chargers.

 

el wire and el tape

CHASING Driver for 5 - 15m

This adaptable EL Driver only works for CHASING EL Wire

With this Driver you can adjust the speed of the chasing wire

Ultra chasing el wire

It is a powerful driver and is suitable for 5m - 15m of standard Chasing EL Wire or 5m ULTRA Chasing EL Wire
It DOES NOT have an On /Off Switch and will switch on as soon as it is connected to a power source.

chasing el wire

As explained in detail below, these Adaptable Drivers are very versatile with a whole selection of Power inputs (Mains, Batteries, Direct 12V etc)

Its dimensions are: 5cm x 4cm x 4cm (L x W x H) and weighs 80g.

Instructions:

1. Switch On, (to first position), ensuring that you have the EL Wire attached, as not having it attached when switching the Driver on can burn the Driver out.
2. The first position is ON and normal chasing speed.
3. Slide the switch to the last position and the Chasing EL Wire will move between speeding up and slowing down.
4. Watch the speed and when you see the speed that you want the EL Wire to chase at, move the switch back to the first position and it will lock the speed you want to use.

This Driver does have an On/Off Switch

EL Driver Options:

We have found it is impossible to guess how you will be using the EL Wire, EL Tape and Drivers, so you will see on this website we have tried to give you as many choices as possible.

This driver is no exception as it also has a range of power inputs that hopefully cover most uses:

1) ONLY THE DRIVER

adaptable chasing inverter for Chasing EL Wire

Maybe you have your own 12V 5.5mm/2.1mm input you want to use, perhaps you will be using one of the 2-way power splitters?

Whatever your reason, this option gives you just the driver (as in the pic above) - without any external power connectors like the rest of these listed below...

 

2) Crocodile Clips

crocodile clips

Perfect if you already have your own 12V battery to run this driver

 

3) 8xAA Battery Box

batterybox

This 8xAA Battery Box will plug straight into the driver. It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

 

 

4) 3 x 18650 Rechargeable Battery Box

batterybox

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make this EL Driver portable.

 

5) Rechargeable Li-ion Battery

rechargable li-ion battery

Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes

1800mAh (flat): 100g (10cm x 5.5cm x 0.8cm)

1800mAh: 100g (5cm x 3.3cm x 2.7cm)

3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)

5000mAh: 265g (5.3cm x 5.8cm x 3.9cm)

All of these Li-ion Batteries come with an intelligent recharger

 

6) Mains Powered

mains PSU for EL Wire

This handy PSU can be used to make this EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)

 

7) Car Lighter Adaptor

This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories

 

 

8) 2 way Splitter for 12V Power Input (5.5mm)

2 to 1 splitter for 12v 2.1mm 5.5mm adapter

If you're thinking of running two of these units off of one power source, then get yourself one of these splitters.

Please note this is a Splitter from the Battery to the Driver, so you would only need one Battery pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) - you can get those types of EL WIRE SPLITTERS HERE

 

*If you want more than one of the power connector mentioned above for your EL Driver,

They can all be found in our Accessories section, or just click the description you want and be taken to its own page*

 

 1m extender for 12v

12v 1m extender

you can use this 1m Extender by connecting the extender between the Power Source and the Driver

The 1m Extender is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

 

Remote Control

12v remote control

you can use this Remote Control Unit by connecting the Controller between the Power Source and the Driver

You can use several controllers with just one hand-held remote unit if you want to switch several drivers at once

The Remote Control Unit is not available in the drop down menu above - please click on the link to get the full details of this handy EL Accessory and add it to your basket

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

- - - - - - - - - - - -

el wire and el tape

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to message us with any questions.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop