These multicoloured waterproof LED Strips are super bright and noticeably glow even in daylight
These are high quality LEDs with an IP67 waterproof rating
They can change colour at the press of a button, are flexible and you have the option to peel off the backing and they will stick to most surfaces as they use strong 3M glue
These particular strips are 'low density' LED Strips with 30 LED's per metre
It is possible to get these strips with 60 x LEDs per metre, but we found that LED strips are already very bright
and we prefer to have a lower power consumption
These are 4 pin RGB LEDs
The 4 Pins on these LED lights are for: Red, Green, Blue and Power
Power is always at one edge and usually marked with an arrow.
Please make sure you line up these arrows so the LEDs receive power to light them up
We have these LED strips in lengths of:
10cm (3 LEDs)
30cm (9 LEDs)
50cm (15 LEDs)
1 metre (30 LEDs)
2 metres (60 LEDs)
3 metres (90 LEDs)
5 metres (150 LEDs)
You can join the blocks together using connecting pins, or use LED Splitters or LED Extenders to get the LEDs exactly where you want
The LEDs need a controller that can either be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V Source
The Controllers allow you to change the colour of the LEDs as well as a selection of fading and strobe effects (these LEDs don't chase)
This small personal LED controller lets you chose 20 different colours as well as a choice of 20 different fading and strobing effects
If you want several costumes all to be controlled at once or maybe they are dotted all around a room, or even different rooms
Then they can all be changed by this one Remote that will be able to effect several LED controllers at once
It is RF (Radio Frequency) which means it will work from up to 20 metres away and doesn't have to be 'line of site'
Jargon Busting
These LEDS strips are known as RGB SMD 5050
RGB is Red, Green and Blue. It is the colour of the LEDs that make all the other colours (including white)
SMD stands for Surface Mounted Diode. It just means the LEDs are laid in a row
and the 5050 means the LED size is 0.50cm x 0.50 cm
IR Remote and Controller for LED
This is a selection of LED Controllers with an Infra Red Remote so it will remotely change the colour or pattern of the LEDs
These IR Remotes need a line of site to the pickup on the controller to let them work
There are several colour settings and each of these can be set to a choice of 5 brightnesses
Also you can chose from a range of Flashing, Strobing and Fading effects and each of these can be set to one of 5 speeds
All the controls you could possibly need for an LED strip are squeezed into these remote control units
The controller is compatible with 4-pin RGB SMD 5050 LED Strips and LED Blocks
you can choose which of these you prefer here:
[one_third]
LED STRIPS
[/one_third]
[one_third]
TRIPLE LED BLOCKS
[/one_third]
[one_third_last]
QUAD LED BLOCKS
[/one_third_last]
You can join the LED Strips directly onto each other, or use LED Splitters or LED Extenders to get the LEDs exactly where you want
Compared to EL Wire, LEDs' are much more power hungry and must be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V source
The Controller has a 5.5mm Jack Plug so you can swap between any of these power inputs
IR Remote and Sound Activated Controller for LED
This LED Controller with an Infra Red Remote and sound activation will remotely change the colour or pattern of the LEDs
This IR Remote need a line of site to the pickup on the controller to let them work
There are several colour settings on this controller and can be set to a choice of 5 brightnesses
You can also choose from a range of Sound Activated, Flashing, Strobing and Fading effects and each of these can be set to one of 5 speeds
All the controls you could possibly need for an LED strip are squeezed into this remote control unit
The controller is compatible with 4-pin RGB SMD 5050 LED Strips and LED Blocks
you can choose which of these you prefer here:
[one_third]
LED STRIPS
[/one_third]
[one_third]
TRIPLE LED BLOCKS
[/one_third]
[one_third_last]
QUAD LED BLOCKS
[/one_third_last]
You can join the LED Strips directly onto each other, or use LED Splitters or LED Extenders to get the LEDs exactly where you want
Compared to EL Wire, LEDs' are much more power hungry and must be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V source
The Controller has a 5.5mm Jack Plug so you can swap between any of these power inputs
These LED Strips are super bright and noticeably glow even in daylight
They can change colour at the press of a button, are flexible and you have the option to peel off the backing and they will stick to most surfaces as they use strong 3M glue
The entire size of the blocs are 7cm x 2cm
and these particular strips are waterproof to IP65 standard
We have these LED strips in lengths of:
3 x Blocks (9 LEDs)
5 x Blocks (15 LEDs)
10 x Blocks (30 LEDs)
You can join the blocks together using connecting pins, or use LED Splitters or LED Extenders to get the LEDs exactly where you want
The LEDs need a controller that can either be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V Source
The Controllers allow you to change the colour of the LEDs as well as a selection of fading and strobe effects (these LEDs don't chase)
This small personal LED controller lets you chose 20 different colours as well as a choice of 20 different fading and strobing effects
If you want several costumes all to be controlled at once or maybe they are dotted all around a room, or even different rooms
Then they can all be changed by this one Remote that will be able to effect several LED controllers at once
It is RF (Radio Frequency) which means it will work from up to 20 metres away and doesn't have to be 'line of site'
Jargon Busting
These LEDS strips are known as RGB SMD 5050
RGB is Red, Green and Blue. It is the colour of the LEDs that make all the other colours (including white)
SMD stands for Surface Mounted Diode. It just means the LEDs are laid in a row
and the 5050 means the LED size is 0.50cm x 0.50 cm
These LED Strips are super bright and noticeably glow even in daylight
They can change colour at the press of a button, are flexible and you have the option to peel off the backing and they will stick to most surfaces as they use strong 3M glue
The entire size of the blocs are 4cm x 3.5cm
and these particular strips are waterproof to IP65 standard
We have these LED blocks on these strings:
3 x Blocks (12 LEDs)
5 x Blocks (20 LEDs)
10 x Blocks (40 LEDs)
You can join the blocks together using connecting pins, or use LED Splitters or LED Extenders to get the LEDs exactly where you want
The LEDs need a controller that can either be powered by 8 x AA Battery Pack, Mains (UK plug), Rechargeable Batteries or your own 12V Source
The Controllers allow you to change the colour of the LEDs as well as a selection of fading and strobe effects (these LEDs don't chase)
This small personal LED controller lets you chose 20 different colours as well as a choice of 20 different fading and strobing effects
If you want several costumes all to be controlled at once or maybe they are dotted all around a room, or even different rooms
Then they can all be changed by this one Remote that will be able to effect several LED controllers at once
It is RF (Radio Frequency) which means it will work from up to 20 metres away and doesn't have to be 'line of site'
Jargon Busting
These LEDS strips are known as RGB SMD 5050
RGB is Red, Green and Blue. It is the colour of the LEDs that make all the other colours (including white)
SMD stands for Surface Mounted Diode. It just means the LEDs are laid in a row
and the 5050 means the LED size is 0.50cm x 0.50 cm
These 2-way and 3-way Splitters are ideal for making the most out of your LEDs
get them exactly where you need them
remember to line-up the arrow on the splitter with the 12v on the LED Strip or LED Block
This comes with 3 x 4-pin connectors, but you could also get spares here
These extenders are ideal for making the most out of your LEDs' by placing them exactly where you need them.
Remember to line-up the arrow on the splitter with the 12v on the LED Strip or LED Block.
This comes with a 4-pin connector, but you could also get spares here.
Available in three lengths: 15cm, 50cm or 1 metre
This is a corner block for 4 pin LED's.
Remember to line-up the arrow on the splitter with the 12v on the LED Strip or LED Block
This comes with 2 x 4-pin connectors, but you could also get spares here.
This Splitter is ideal for making the most out of your LEDs
get them exactly where you need them
remember to line-up the arrow on the splitter with the 12v on the LED Strip or LED Block
This comes with 3 x 4-pin connectors, but you could also get spares here.
This Splitter is ideal for making the most out of your LEDs
get them exactly where you need them
remember to line-up the arrow on the splitter with the 12v on the LED Strip or LED Block
This comes with 4 x 4-pin connectors, but you could also get spares here.