Detroit: Become Human Set
In this set is everything you need to turn into Kara, Connor or Markus
With this set you will get:
1) Two different 2cm flat glowing rings to go on the temple (one light blue, one red)
2) mini driver to power the small hoop
3) 2 x 7cm Triangles to attach to the outside of the cosplay outfit
4) 1 x 5cm x 35cm EL Tape to make a glowing armband
5) 50cm (1.5 foot) of El Wire to go round the collar
6) a portable driver that takes 8 x AA batteries to power the triangles, armband and EL Wire (and the temple hoop if desired)
7) splitters to easily join all the parts together
8) 50cm of sticky backed/sewable velcro so the armband and triangle can easily be attached to clothes
The whole of the set is plug and play, but you will need your own clothing to attach these pieces to
In this set is everything you need to turn your own normal hoodie into a glowing EL Wire hoodie
With this set you will get:
1) 1.5 metres of 3.2mm EL Wire to outline the hoodie
2) Trigger Driver so you can switch from 'glow mode' to 'incognito' using a switch in your sleeve
3) 30 x Clear Hoops to make it easy to attach the EL Wire to the hoodie and also make it removable so you can put it through the washing machine
The EL Wire outline is in a selection of colours:
Light Blue (Tron Blue), Deep Blue, Pink, Purple, Orange, Red, Yellow, Lime Green, Grass Green and White
We have some crazy glowing masks and glasses that go well with this kit - take a look!
EL Wire is a perfect material for making glowing neon effect signs
We have made this even better by developing an EL wire that contains a thin metal rod that helps it hold its shape
So making your own sign has never been easier
With this set you will get:
1) 3 metres of specialist Stiff EL Wire to easily shape into your own design
2) EL Driver with plunger switch to power the wire and give you an accessible on/off switch
3) 3 x fixing ties to help hold your sign in place
4) 30cm of heat shrink which you can use to black out any non-lit portion of your sign
5) Instructions with tips to help you make your sign
The whole of the set is plug and play, but you will need your own backing material or wall to attach your sign too
EL Glowing Ties - with Choice of Drivers
Here we have some amazing looking glowing ties
The ties are in 5 colours:
White, Black, Gold, Red, Deep Blue
The EL Wire outline is in a selection of colours and you can choose different colour wire to the colour of the tie:
Light Blue (Tron Blue), Deep Blue, Red, Yellow, Lime Green, Turquoise-Green and White
glowing EL Tie
Of course, they need an EL Driver to make them glow - The EL Ties have a 50cm long power cable on them that ends in a standard EL Connector
NO DRIVER = £6 - choose this if you already have an EL Driver you can use to attach to the EL Glasses, or if you want to use a different driver or sequencer
Basic Driver = £10 - This is our Basic 2 x AA driver which has a button that scrolls through 4 modes: Constant On - Strobe - Fast Flash - Slow Flash OFF
Mini Driver = £12 - This is a very small and discreet Driver that takes a single AAA battery
Of course as the EL Glasses have a standard connector you can use one of our splitters to also run more wire or some EL Tape or EL Shapes off the same driver.
Or use a sequencer to make the EL Tie flash alongside other parts of your costume.
If it helps you plan part of a bigger EL Project, there is just over 60cm of EL Wire on the EL Tie