Buckle Driver for 1m EL Wire




In stock


This is a really handy small portable EL Driver that runs off of 3 x AG13 batteries (included)

It is only: 6cm x 3.5cm x 1.3cm

It can run 1 metre of EL wire or 25squ cm or under,

The whole unit comes in two parts that each have a 2.5cm wide belt loop built in. These click together so the driver can easily be built into any rucksack or a thin belt

buckle driver for up to 1m of EL Wire

The driver has a button with 3 settings:

On / Flash / Off

This EL Driver has an 8cm output wire with plug a standard EL wire connector on the end.

Use this to connector plug in EL Wire or a Splitter.

*All the EL wire we supply comes with a connector so they plug straight into the driver*

**EL Drivers contain an inverter that switches the current from DC to AC and increases the voltage – for this reason EL Drivers are often called EL Inverters – they are the same thing**

Using a splitter, this driver can run many separate strands and colours of EL wire as long as the total length of wire is 1 metre or under.


A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.

– – – – – – – – – – – –

EL wire has loads of uses.

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.

The EL wire can be cut into smaller lengths and attached to another driver.

Or with some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn’t needed.

It is a cliche to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glowstick that lasts over 5,000 hours.

We’re sure you will be amazed – feel free to message us with any questions.

el wire and el tape

Additional information

Weight 0.025 kg
Dimensions 8 × 5 × 2 cm

You may also like…