Portable Mini Driver for 1 metre EL Wire or 50sq cm EL Tapes/Panels

Description

Here we have a really handy small portable EL Driver that takes 1 x AAA battery (battery not supplied).

It’s dimensions are: 5.1cm x 2.9cm x 1.5cm and it can power up to 2 metres of EL Wire but it is ideal when running 1 metre or under of EL Wire.

When it is used to drive more than 1 metre of EL Wire, the whistle of the inverter becomes audible.

(This is important to consider if you are using it in a hat or mask)

The driver has a switch with 3 settings: On / Off / Flash

This EL Driver has an 8cm long output wire with a standard EL wire connector on the end

Use this to connector plug in EL Wire or a Splitter

*All the EL wire we supply comes with a connector, so they plug straight into the driver*

**EL Drivers contain an inverter that switches the current from DC to AC and increases the voltage – for this reason EL Drivers are often called EL Inverters – they are the same thing**

Using a splitter, this driver can run many strands and colours of EL wire as long as the total length of wire is 2 meters or under

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.

– – – – – – – – – – – –

EL wire has loads of uses.

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.

The EL wire can be cut into smaller lengths and attached to another driver.

Or with some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn’t needed.

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.

We’re sure you will be amazed – feel free to message us with any questions.