+44 (0)1435 860753
This is an RF (Radio Frequency) 12v Remote Controller, which can operate from up to 25 metres away and the handheld remote controller does not need line of sight with the switch box to switch it on or off.
The Switch is programmable, so it is possible for one remote to control one or several switch boxes. Simply unscrew the switch box, then hold down the red button inside while pressing the ON button on the Remote Controller.
This will reprogram the Switch Box to this frequency.
The Input of the switch box is a 12V 5.5mm socket. The output is a 12V 2.1mm jack plug.
This means it will plug in between a host of electrical items – and if yours does not have a jack plug fitted then it is okay to strip these off and wire it in directly.
All our 12V EL Drivers will also plug into this remote controller as they have 5.5mm sockets on them to receive power.
We have developed this item for EL Wire but it is not solely for use with EL Drivers and has a range of uses wherever remotely controlling a 12V device is necessary.
The Maximum charge this device allows is 6A which is pretty high for a 12V Device (72W)
The in-line receiver plugs in between any power supply below and a 12v adaptable driver
Perfect if you already have your own 12V battery to run a driver
This 8xAA Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) but will make an EL Driver portable
This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (63mm X 58mm X 30mm) and the leads for the output are 15cm long but will make an EL Driver portable.
Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes
1800mAh (thin): 125g (10cm x 5.5cm x 0.8cm)
1800mAh (square): 125g (5cm x 3.3cm x 2.7cm)
3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)
5000mAh: 250g (5.3cm x 5.8cm x 3.9cm)
All of these Li-ion Batteries come with an intelligent recharger
(Li-ion Batteries are only available to the UK due to airmail postal restrictions)
This handy PSU can be used to make any EL Driver powered off of Mains Electricity (UK, US or Euro plugs are available)
Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Wires) – you can get those types of EL WIRE SPLITTERS HERE
*If you want more than one of the power connector mentioned above for your EL Driver,
They can all be found in our Accessories section, or just click the description you want and be taken to its own page*
FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED
|Dimensions||10 × 10 × 3 cm|