EL Iron Man Body Set = EL Panel Arc Reactor + Hand Repulsors

£19.99

 
Everything you need for the Iron Man body set, ready to plug and play. With this set you get:

  • 2 pieces of 3cm diameter glowing EL Panel for the Hand Repulsors.
  • Choice of 1 x 10cm diameter round or triangle shaped, white EL Panel, for the Arc Reactor.
  • 1 x 2 AA battery powered driver with switch to make the panels glow. Batteries not supplied.
  • 1 x specialist 3-way splitter and 2 x 1.2m extenders to get power to the round panels down on the hands.

Clear

Description

Our Iron Man Sets supply you with ‘plug and play’ EL Panels, splitters and driver to help you build a glowing Iron Man Costume

With this kit you get:

1) 2 pieces of 3cm Diameter EL Panel for the Hand Repulsors

2) Plus a 10cm diameter round (or triangle shaped) white EL Panel for the Arc Reactor

3) Also a 2 x AA battery driver/inverter with switch to power the panels

4) And specialist 3 way splitter and 2 x 1.2m extenders to get power to the round panels down on the hands

 

el panel repulsor

EL Panels for the Hand Repulsor

The suggested setup is:

The Driver/Inverter is held on the body near the chest

A Three-way-splitter comes out and one channel goes off to the round panel acting as the Arc Reactor near the chest

The other two channels are longer and these have 1.2m extender wires attached to them to run down each arm to take power to the EL Panels for the Hand Repulsor

We have some crazy glowing masks & glasses that go well with this kit – take a look!

el wire and el tape

Additional information

Weight N/A
Dimensions N/A
Arc Reactor

,

You may also like…