Basic Tron Set = 2 x 1m of EL Wire + 2 x EL Tape Hoops + Driver

£14.99

With this Basic Tron set you get:

 

  • 2 x 1 metre lengths of high quality (3.2mm) EL Wire, available in a range of colours.
  • 2 x 6cm diameter EL Tape Hoops.
  • A 4 x AAA battery powered driver with on/off switch plus 4 modes including continuous ON, Strobe, Slow flash and Fast flash. Batteries not supplied.
  • 1 x 4 way splitter which lets you have the 2 x 1 metre lengths of EL Wire and the 2 x 6cm hoops attached to one driver.
  • 10cm of Velcro – sticky on one side and sewable on the other, to attach the EL Hoops to your costume.
  • 10 clear plastic hoops – to sew on to your costume which you then feed the EL Wire through.

 

Description

With this set you get:

1) 2 pieces of 1 metre high quality (3.2mm) Electroluminescent Wire

2) 2 x 6cm diameter EL Tape Hoops.

3) A decent 4 x AAA battery Driver/Inverter with on/off switch plus 4 modes including continuous ON, Strobe, Slow flash and Fast flash

4) 1 x 4 way splitter. The splitter lets you have 2 x 1 metre lengths of EL Wire and the 2 x 6cm hoops attached to one driver/inverter – This gives you greater control and flexibility in the designs of your Tron costume

5) 10cm of Velcro – sticky on one side and sewable on the other to help you attach the EL Hoops to a costume.

6) 10 clear plastic hoops – to sew on to your costume which you then feed the EL Wire through.

The EL Wire can be any combination of these colours:

Light Blue (Tron Blue), White, Red, Orange, Purple, Pink and Yellow

To make it easier to design your outfit, below are the dimensions of the inverters and lengths of connecting wires – there is also tips on how to create your costume

DRIVER/INVERTER

The Power Pack takes 4 x AAA batteries and has a built-in voltage inverter that ‘inverts’ the 6 Volts from the batteries up to the 100 Volts needed to make the EL Wire glow

The power pack/inverter is 8.5cm x 5cm x 2cm

It has an On/Off switch – plus a mode button for the 4 Modes: Continuous, Strobe, Fast flash and Slow flash

It has an 8cm wire coming out of it that leads to the…

SPLITTER

The Splitter is 40cm long in total,

it is 20cm of wire which then splits into 4 separate strands which are all 20cm long and lead to the…

EL WIRE

There is then another 20-25cm from the connector until the actual glowing start of EL Wire – then there is 2 X 1metres of gorgeous glowing wire!

These are long enough to run up the body and down the arm

EL HOOPS

The other part of the splitter runs to two 6cm diameter EL Hoops that make any Tron costume look amazing

Its not complicated or fiddly – I’ve just given all those details if you want to plan your costume before you buy the set

The whole kit is ready to use – just plug and play!

OR FEEL FREE TO CONTACT US IF YOU WANT HELP WITH YOUR EL PROJECT

We have some crazy glowing masks & glasses that go well with this kit – take a look!

el wire and el tape

You may also like…