EL Wire Sample Packs

So you've not used or seen Electroluminescent Wire before and you are curious to see what the colours are like in the different types and thicknesses and what you can do with it.

The beauty of EL Wire is its easy to use and comes ready to plug and play. Our samples packs have a good selection of EL Wire in all its different forms and colours.

Choose from the drop down menu:

1) All Blue - Mix of Types
Choose this option if you want try out our Blue wires, and we will send you a selection of different wires and diameters

In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in Light Blue
2) 1 x 1m length of 2.3mm EL Wire in Light Blue
3) 2 x 50cm lengths of 3.2mm EL Wire in Light Blue and Deep Blue
4) 1 x 1m length of 5mm EL Wire in Light Blue
5) 2 x 50cm length of Sewable EL Wire in Light Blue and Deep Blue
6) 1 x 1m length of Stiff EL Wire in Aqua
7) 2 x 50cm lengths of Maxi EL Wire in Blue and Purple (this has a blue tone to it)
8) 1 x 2 x 12cm length of Light Blue EL Tape
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black.

2) All White - Mix of Types
Choose this option if you want try out our White wires, and we will send you a selection of different wires and diameters.

In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in White
2) 1 x 1m length of 2.3mm EL Wire in White
3) 1 x 1m length of 3.2mm EL Wire in White
4) 1 x 1m length of 5mm EL Wire in White
5) 1 x 1m length of Sewable EL Wire in White
6) 1 x 1m length of Stiff EL Wire in White
7) 1 x 1m length of Maxi EL Wire in White
8) 1 x 2 x 12cm EL Tape in White
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black

3) Mixture of all Colours and Types
Choose this option if you want try out all of our colours, and we will send you a selection of different wires and diameters

In this EL Wire Sample Pack you will get:
1) 1 x 1m length of 1.0mm EL Wire in White
2) 1 x 1m length of 2.3mm EL Wire in Red
3) 1 x 1m length of 3.2mm EL Wire in Light Blue
4) 1 x 1m length of 5mm EL Wire in Orange
5) 1 x 1m length of Sewable EL Wire in Yellow
6) 1 x 1m length of Stiff EL Wire in Lime
7) 1 x 1m length of Maxi EL Wire in Pink
8) 1 x 2 x 12cm EL Tape in Light Blue
9) 1 x Mains 5-15m Driver/Inverter
10) 1 x 8xAA Battery Box
11) 1 x standard 6-way splitter (40cm long) in black
12) 1 x standard 6-way splitter (40cm long) in white
13) 1 x mini 2-way splitter (20cm long) in black

Our wires are available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green and White

Our wires are available in any of these types: 1.0mm, 1.5mm, 2.3mm, 3.2mm, 5mm, Stiff, Ultra and sewable

All of our sample packs come with:

1) 5-15m adaptable driver with (mains plug- relevant to your location) (email us - if you would like a battery option)

2) Splitters to 'drive' all the wires at the same time.

3) 2 x 12cm EL Panel

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White.

The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector attached and so is ready to clip into an EL Driver.

A wide selection of other EL Tape, EL Panels, Sequencers, Drivers and helpful EL accessories are available from our store

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH OF EL WIRE LISTED AS WE TAKE CUSTOM ORDERS - TPLEASE BE AWARE THERE IS A MINIMUM ORDER REQUIREMENT FOR CUSTOM ORDERS.

EL wire has loads of uses

It has an amazing neon string effect when decorating the interior or exterior of the home, cars, motorbikes, bicycles and trailers. It can be used to make faux neon signs and attached to costumes and even be threaded into clothes and hats. It can be used as safety lighting and mood lighting.

1.0mm Fine EL Wire @ £5 per metre

This fine EL Wire is one of the brightest of all the types of EL Wire and is also very malleable and will hold its shape when bent like a kind of neon modelling wire, making it a fun and useful material to work with.

EL Wire twisted into ringlets

EL Wire twisted into a zig-zag pattern

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED.

The colours we have at present are:
Light Blue (Tron Blue), Mint Green and White

In these lengths:

50cm, 1metre, 3metre, 5metre, 10metre, 25metre and 30metre

- - - - - - - - - - - -

This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same driver.

By using splitters you can also connect as many strands of the glowing wire to the same driver

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

This wire can be cut into smaller lengths and attached to another driver

Our drivers can run many strips of wire as long as the total length of the wire is under the drivers maximum capacity

With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed

Joining tape and tubing for re-attaching the wire are available from this store

- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.

You will also definitely need some wire strippers

You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle

There are How-tos and a forum on the site to get some great tips

1.3mm Fine 'Angel Hair' EL Wire @ £4 per Metre

This 'Angel Hair' EL Wire is a very light diameter of EL Wire, making it a fun and useful material to work with if you're attaching to light fabric.

EL Wire twisted into ringlets

EL Wire twisted into a zig-zag pattern

The colours we stock in this diameter are:
Light Blue (Tron Blue), Deep Blue, Pink, Orangey-Red, Yellow, Lime Green, Turquoise-Green and WhiteWhite

And in these lengths: 10cm / 50cm / 1 metre / 3 metre / 5 metre / 10 metre / 15 metre / 30 metre

This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same Driver.

By using Splitters you can also connect many strands of the glowing wire to the same Driver.

EL wire has loads of uses!

This neon wire looks amazing when decorating the interior or exterior of cars, it can be used inside and outside of the home and office and can even be threaded into clothes and hats.

Our Drivers can run many lengths of wire as long as the total length of the wire is under the Drivers maximum capacity

With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed.

Joining tape and tubing for re-attaching the wire are available from this store

- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different Driver

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.

You will definitely need some wire strippers

There are How-tos and a forum on the site to get some great tips

1.3mm Orange Fine 'Angel Hair' EL Wire @ half price (£2.00 per metre)

This 'Angel Hair' EL Wire is not only the brightest of all the thicknesses of EL Wire it is also the most malleable and will hold its shape when bent like a kind of neon modelling wire, making it a fun and useful material to work with.

EL Wire twisted into ringlets

EL Wire twisted into a zig-zag pattern

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED.

This listing is for Orange and available in these lengths: 10 centimetre and 3 metres.

This EL Wire comes with a standard connector already attached so simply plugs into any EL inverter - this makes it easy to change between coloured wire on the same driver.

By using splitters you can also connect as many strands of the glowing wire to the same driver

EL wire has loads of uses

This neon wire looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

This wire can be cut into smaller lengths and attached to another driver

Our drivers can run many strips of wire as long as the total length of the wire is under the drivers maximum capacity

With some care, the EL wire can be attached to speaker wire to make patterns or extend the neon wire over gaps where it isn't needed

Joining tape and tubing for re-attaching the wire are available from this store

- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.

You will also definitely need some wire strippers

There are How-tos and a forum on the site to get some great tips

MAXI EL Wire - 1.5mm High Brightness @ £5 per metre

MAXI EL Wire lives up to its name by bringing together the latest breakthroughs in electroluminescent technology to create a high brightness glowing wire that outshines standard EL Wire.

At 1.5mm in diameter, you will find that whilst making patterns with the MAXI EL Wire, it will hold itself rigid when bent into its desired shape. 1.0mm fine EL Wire also does this, but MAXI EL Wire creates a much more rigid form.

The Maxi EL Wire is more robust than the Ultra EL Wire and is as reliable as the standard EL Wire.

The bend radius of MAXI EL Wire is 5mm; the same as our standard EL Wire.

Breaking strain is at 1kg also the same as our standard EL Wire.

Pressure on the MAXI EL Wire should not be more than 1kg; the same as our standard EL Wire.

These spectacular improvements are due to a thicker copper core giving a greater area of luminosity and helps the EL Wire hold its shape.

MAXI EL Wire uses exactly the same Splitters, Drivers and Sequencers as standard EL Wire.

This remarkable glowing wire is £5 per metre and is available in 50cm, 1 metre, 3 metre, 5 metre, 10 metre and 25 metre lengths (with connectors attached).

It is available in Light Blue, Lime Green, Orange, Yellow, Deep Blue, Deep Pink, Pink and White

Comparing Standard, MAXI and ULTRA EL Wire

As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.

The EL Wire has a connector already attached so is ready to simply clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

A wide selection of other EL Tapes, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our store.

2.3mm diameter EL Wire @ £2.50 per metre

The 2.3mm diameter Electroluminescent wire is our cheapest standard EL Wire,

it is available in any of these colours:
Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green, Turquoise-Green and White

300 metre lengths are only available in Lime, Light Blue, Deep Blue, Red and WhiteWhite

2.3mm diameter EL Wire is available in the following lengths:

1 metre, 3 metre, 5 metre, 15 metre, 10 metre, 100 metre and 300 metre

(The 3.2mm diameter wire is also available in 10 metre and 25 metre lengths)

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White.

The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector on it so is ready to clip into an EL Driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our store

We take custom orders for custom lengths of EL Wire.

This wire comes with a standard connector already attached so simply plugs into any EL Driver.

By using 'Splitters' you can also connect different strands to just one Driver

EL wire has loads of uses!

It has an amazing neon string effect when decorating the interior or exterior of cars and motorbikes and can be used inside and outside of the home and office and can even be threaded into clothes and hats

3.2mm EL Wire @ £3 per metre

The 3.2mm EL Wire is favoured by makers as it is robust and its thickness offers protection while still having a bright neon effect. When placed on a costume or other project it keeps straight lines without showing kinks

It is available in any of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Grass Green, Turquoise-Green and White

Because the EL naturally glows blue/green the brightest colour of the wire is the Light Blue, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED

- - - - - - - - - - - -

This wire comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between coloured wire on one driver

By using splitters you can also connect different strands to the same driver

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

This wire can be cut into smaller lengths and attached to another inverter

Our inverters can run many strips of wire as long as the total length of the wire is under the inverters maximum capacity

With some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed

Joining tape and tubing for attaching EL Wire is available from this store
this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.

You will also definitely need some wire strippers.

You can happily use the joining tape and heat shrink tubing supplied for a decent join but if the joint is likely to encounter stress (e.g if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g behind a panel in a car) then we would advise soldering to avoid future hassle

It is a cliché to say you are only limited by your imagination but with this neon string it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours

We're sure you will be amazed - feel free to email or ring us with any questions

5mm THICK EL Wire @ £4 per metre

The 5mm EL Wire is the least brightest of different diameters of EL Wire, but is ideal for outdoor applications - Sunlight is not good for EL Wire and the thick coating on this wire protects it more.

Some people also prefer this thicker wire for its 'chunky neon cable' look but will not bend into the rightangles required for some letters of the alphabet.when you're making a faux neon sign.

The colours we have at present are:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Grass Green, Lime Green, Turquoise-Green and White

This 5mm thick EL wire is available in the following lengths: 10cm, 1 metre, 3 metre, 5 metre, 10 metre

This wire comes with a standard connector already attached so that it simply plugs into any EL Driver.

By using 'Splitters' you can also connect different strands to the same Driver.

EL wire has loads of uses!

It has an amazing neon string effect when decorating the interior or exterior of cars, can be used inside and outside of your home and office and can even be threaded into clothes and hats.

This wire comes as 'plug and play' but if you want to get more technical you can be cut into smaller lengths

Our EL inverters can run many lengths of wire as long as the total length of the wire is under the Driver/Inverters maximum capacity

With some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isn't needed

Joining tape and tubing for re-attaching the wire are available from this store

- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention so you will definitely need some wire strippers.

You can happily use the joining tape and heat shrink tubing for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostled) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle

There are How-tos and a forum on the site to get some great tips

STIFF EL Wire 2.3mm @ £5 per metre

Stiff EL Wire lives up to its name as a mould-able, bendable wire suitable for making signs or shapes.

At 2.3mm in diameter, you will find while making patterns with this Stiff EL Wire, it will hold itself rigid when bent into its desired shape and is robust with a strong connector

The bend radius of Stiff EL Wire is 5mm which is the same as our standard EL Wire as is the breaking strain at 1kg
Pressure on the Stiff EL Wire should not be more than 1kg, this means it cannot be pinched too hard or trodden on

This Stiff EL Wire is unlike the standard EL Wire. The 1.0mm, MAXI and ULTRA also share this property, but because of a reinforced copper core, the Stiff EL Wire definitely holds its shape best.

Stiff EL Wire uses exactly the same splitters, drivers and sequencers as standard EL Wire

This remarkable bendy wire is £5 per metre and is available in 50cm, 1metre, 3metre, 5metre, 10metre and 25metre lengths (with connectors attached)

It is currently available in these colours: Deep Blue, Aqua, Red, White, Lime Green and Gold

Bend it into any shape

As with all electroluminescent technology, because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from in our store

FEEL FREE TO CONTACT US, IF YOUR REQUIRED LENGTH ISN'T LISTED.

ULTRA EL Wire - High Intensity @ £6 per metre

ULTRA EL Wire lives up to its name by bringing together the latest breakthroughs in electroluminescent technology to create an intensely bright glowing wire that outshines all other types of EL Wire (including Double Core)

At a sturdy 2.6mm in diameter, you will find while making patterns with this ULTRA EL Wire, it will hold itself rigid when bent into its desired shape, (1.0mm EL Wire also does this, but ULTRA EL Wire creates a much more robust form)

Please note ULTRA EL Wire has to be handled more carefully than standard EL Wire, there are three things to be aware of:

1. The bend radius of Ultra EL Wire is 1.2cm which is much less than standard EL Wire which is 5mm.
2. The breaking strain is 500g, compared to 1kg for standard EL Wire.
3. Pressure on the Ultra EL Wire should not be more than 500g, this means it cannot be pinched too hard or trodden on

These spectacular improvements are due to bringing together these latest breakthroughs in electroluminescent technology:

1. A thicker copper core gives a greater area of luminosity and helps the EL Wire hold its shape
2. Premium Grade 'next generation' Phosphors are used to coat the core to give the most intense bright neon effect possible

3. Thicker internal corona wires - that's right! Thicker corona wires spiral around the core, this provides maximum exposure of the current applied to the Wire

Comparing 1metre of 2.3mm, 3.2mm and ULTRA EL Wire

ULTRA EL Wire uses exactly the same splitters, drivers and sequencers as standard EL Wire.

It will draw twice as much current to feed its increased brightness

So please remember to treat ULTRA EL Wire like the Double Core EL Wire and halve the EL Driver rating when using ULTRA EL Wire

e.g. if the EL Driver is rated for 5-10m Standard EL Wire then that EL Driver can power 2.5m-5m of ULTRA EL Wire

if the EL Driver is for 10-30 metres standard EL Wire, then it should power 5-15m ULTRA EL Wire

This remarkable glowing wire is £6 per metre and is also available in these lengths (with connectors attached):

50cm, 1 metre, 3 metre, 5 metre and 10 metre

we currently have it available in these colours: Aqua, Lime Green, Orangy-Red, Pink, Gold, Deep Blue and White

Comparing 2.3mm, 3.2mm and ULTRA EL Wire

The wire has a connector on it so is ready to simply clip into an EL driver - THE DRIVER HAS TO BE BOUGHT SEPARATELY

A wide selection of EL Tapes, EL Panels, EL Wire, Sequencers, Drivers and helpful EL accessories are available from in our store

Basic Dance Act EL Wire Set

Take Street Dance to a whole new level with this Glowing EL Wire Set

This set is for a 'plug and play' EL Wire and Driver - but you have to attach it to your own costume

With the set you get:

1) 5 pieces of 1 metre EL Wire in a choice of colours

2) A Trigger Driver that has a 1m long power wire that is able to run down the sleeve, allowing the performer to turn the lights on and off at will

This Driver takes 2 x AA batteries (not supplied) and is powerful enough for 5m of Standard EL Wire (2.5m of Ultra EL Wire)

EL Driver with long plunger trigger control

Trigger Driver for EL Wire

3) A long 2-way splitter and a standard 2-way and 3-way splitter

By 'daisy chaining' the splitters you can have all the lengths of EL Wire attached to this one driver

4) 30 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

The EL Wire can be any combination of these colours:
Light Blue (Tron Blue), Purple, Grass Green, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, and White

EL Wire Dance Act

The whole kit is ready to use - just plug and play!
We have some crazy glowing masks & glasses that go well with this kit - take a look!

Multicoloured EL Wire @ £6 per metre

Here we have some beautiful EL Wire which is 5mm thick, with a colourful pattern and glows when the wire is attached to an EL Driver.

Other drivers for EL Wire than the ones listed above are available from our online store.

All of the EL Wire including this will already have an EL Connector attached.

This is what the wire looks like when lit.

This is what the EL Wire looks like close up.

Many strands of EL Wire can be connected to a single driver by using a splitter.

*It is not recommended to use a micro EL Driver for this multicoloured EL Wire. Because of the colourful sleeve, we recommend you use the brightest, most powerful driver you can*

- - - - - - - - - - - -

This wire comes with a standard connector so simply plugs into any EL inverter - this makes it easy to change between coloured wire on one inverter.

By using splitters you can also connect different strands to the same inverter.

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.

This wire can be cut into smaller lengths and attached to another drivers.

Our drivers can run many different strips of wire as long as the total length of the wire is under the drivers maximum capacity.

With some care, the EL wire can be attached to thin electrical wire to make patterns or extend the wire over gaps where it isn't needed.

Joining tape and heat shrink tubing are also available if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver.

Cutting the wire into the length you choose is simple... but rejoining it takes care and attention.

You will also definitely need some wire strippers.

You can happily use the joining tape and heat shrink tubing supplied for a decent join but if the joint is likely to encounter stress (e.g. if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (e.g. behind a panel in a car) then we would advise soldering to avoid future hassle.

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow-stick that lasts over 5,000 hours.

We're sure you will be amazed - feel free to message us with any questions.

CHASING 2.3mm EL Wire - Motion Effect @ £5 per metre

This listing is for 2.3mm Electroluminescent glow wire with a chasing motion.

The chasing motion looks amazing - it flows in one continuous motion (it jumps a bit in this picture but that is just the video)

EL Chasing Wire

It is available in any of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Gold, Lime Green and Green

The wire has a special connector on it so does not clip into standard EL Wire connectors or drivers. It needs a Chasing EL Wire Driver (available in the drop-down menu above)

We are now stocking 'Splitters' for chasing El Wire if you would like 2 or 3 separate lengths from the same Driver

A wide selection of other EL Tapes, EL Wire, Sequencers, Drivers and helpful EL accessories are available in our online store

EL wire has loads of uses!

It looks amazing when decorating the interior or exterior of cars and motorbikes and it can be used inside and outside of the home and office and can even be threaded into clothes and hats.

It is a cliché to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glow stick that lasts over 5,000 hours.

We're sure you will be amazed - feel free to message us with any questions you may have and for any advice you may need for your EL projects.

3cm x 1 metre DOUBLE ENDED EL Tape Cut to Make 2 Strips of Any Length

With this 'double ended' EL Tape you end up with two pieces of EL Wire for the price of one! - just cut it in half.

This is a 3cm wide and 1 metre long strip of Electro-Luminescent Tape.

*The full Glow area of the Tape is 2.3cm x 1 metre*

The EL Tape has a connector attached to BOTH ENDS:

This means it can be cut into two pieces of any length you choose.

A 2 Way Splitter is also provided so you can run both the EL Tapes from just one driver.

When cutting EL Tapes or Panels, it is best to use sharp scissors and to seal the cut afterwards with glue and/or clear nail varnish.

We stock the following colours:

Light Blue (Tron Blue), Red, Green, White and Deep Blue

In the drop down menu is also the option to buy the EL Tape with a powerful mains powered or portable Driver (8xAA batteries)

These Drivers are powerful enough to drive about 1 1/2 metre of this (3cm x 1metre) EL Tape in total and will make the Tape plug and play

(If it is more convenient to have a car-lighter attachment instead of the 8xAA Battery Box to power this driver please let us know)

There is a whole selection of Drivers available at EL Wire Craft that could power this EL Tape such as Sequencer or Sound Activated Drivers.

EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it.

EL Tape 5cm x 35cm single connector

This is a 5 cm wide and 35cm long strip of glowing Electroluminescent Tape.

It is ideal for using as an arm band for Detroit: Become Human cosplay

If needed, this EL Panel can be cut down to size using sharp scissors.

When cutting EL Tape or Panel it is best to use sharp scissors or craft knife and to seal the cut afterwards with glue and/or clear tape.

This EL Panel is available in Light Blue (Tron Blue) and White.

In the drop down menu, you'll have the option to buy the EL Tape with a powerful mains powered or portable Driver (8xAA batteries)

These Drivers are powerful enough to drive two of these EL Tapes in total and will make the Tape plug and play

There is a whole selection of drivers available at El Wire Craft that could power this EL Tape such as Sequencer or Sound Activated Drivers.

EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it.

GLOWING STICKGIRL SET = 7.5 metres EL Wire + Driver

Turn yourself into a glowing stickgirl!

This set is for a 'plug and play' EL Wire and Driver - but you have to attach it to a costume

*see the diagram below for a suggested setup*

With the set you get:

1) 3 pieces of 1 metre 3.2mm EL Wire

2) 1 piece of 3 metre 3.2mm EL Wire

3) 3 pieces of 50cm 3.2mm EL Wire

4) An EL Driver with either an 8 x AA Power Pack (batteries not supplied) or a rechargeable 3000mAh Li-ion battery (only available in the UK due to airmail postal restrictions)

This driver is powerful enough to glow up to 15 metres of EL Wire

5) 1 x mini 3-way splitter, 1 x standard 3-way splitter, 1 x long 3-way splitter and 1 x 50cm extender

By 'daisy chaining' the splitters you can have all 9 metres of EL Wire attached to this one driver/inverter

6) 50 x Clear Hoops to make it easy to attach the EL Wire to the costume and also make it removable so you can put it through the washing machine

The EL Wire can be any combination of these colours:

Light Blue (Tron Blue), Purple, Deep Blue, Pink, Red, Orange, Yellow, Lime Green, Turquoise-Green and White

The whole kit is ready to use - just plug and play!

Here is the suggested layout - the EL Wire is recommended to run all round the hem of a dress

Dimensions of the products:

If you are making a costume, it is important to plan it out properly.

For this glowing girl set, the driver is very powerful and so it comes with a choice of two different power packs.

So here are the dimensions of all the parts plus lengths of wire between them.

THE POWER PACK

Takes 8 x AA batteries (not supplied) and is 12.7cm x 7.02cm x 1.9cm and has a 21cm thin power wire coming out of it that leads to the driver

A 3000mAh rechargeable Li-ion battery which weighs 172g and is 7.3cm x 5.6cm x 2.2cm. This option comes with a 1A intelligent charger. Due to airmail restrictions this is option is only available for UK delivery.

THE DRIVER

The driver is 5.4cm x 3.4cm x 2.9cm

It has the controls on it - Off, Flashing or On

It has a 55cm wire coming out of it that leads to the...

SPLITTER

The Splitters are 40cm long in total,

it is 20cm of wire which then splits into 3 separate strands which are all 20cm long

The first has 3 channels and this splits off and lead to the...

EL WIRE

3 x 1 metre for the body

1 x 3 metres is for the skirt

3 x 50cm for the head - - This is the really fun part of designing the expression on the face of your stick man/girl

Its not complicated or fiddly - I've just given all those details if you want to plan your costume before you buy the set

The stickguys and stickgals in these pictures were designed by international party animal Jak Hammer and his amigos!
We have some crazy glowing masks & glasses that go well with this kit - take a look!

The whole kit is ready to use - just plug and play!